AP2152ASG-13

{
  "slug": "ap2152asg-13",
  "version": "0.1.0",
  "type": "component",
  "description": "Diodes Incorporated Power Distribution Switches, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ap2152asg-13",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ap2152asg-13.kicad_sym",
    "ap2152asg-13.kicad_mod",
    "ap2152asg-13.glb",
    "ap2152asg-13.step",
    "ap2152asg-13.lbr",
    "docs/hero.png",
    "docs/ap2152asg-13-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ap2152asg-13-hero.glb",
    "ap2152asg-13-hero.overlay.json",
    "ap2152asg-13-etched.glb"
  ],
  "component": {
    "mpn": "AP2152ASG-13",
    "manufacturer": "Diodes Incorporated",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Distribution Switches",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588941642459975680",
    "parts": {
      "symbol": "ap2152asg-13.kicad_sym",
      "footprint": "ap2152asg-13.kicad_mod",
      "model_3d": "ap2152asg-13-hero.glb",
      "model_3d_plain": "ap2152asg-13-etched.glb",
      "model_3d_step": "ap2152asg-13-etched.step",
      "model_3d_step_plain": "ap2152asg-13.step",
      "lbr": "ap2152asg-13.lbr"
    },
    "distributor_links": {
      "lcsc": "C2149820"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T20:14:25Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the device."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Voltage input pin; recommended input range is 2.7V to 5.5V, with an absolute maximum of 6.5V."
      },
      {
        "number": "3",
        "name": "EN1",
        "type": "input",
        "description": "Switch 1 enable input, active high on AP2152A (active low on AP2142A); VIH minimum 2V and VIL maximum 0.8V."
      },
      {
        "number": "4",
        "name": "EN2",
        "type": "input",
        "description": "Switch 2 enable input, active high on AP2152A (active low on AP2142A); VIH minimum 2V and VIL maximum 0.8V."
      },
      {
        "number": "5",
        "name": "FLG2",
        "type": "output",
        "description": "Switch 2 over-current and over-temperature fault report; open-drain output that goes active low when triggered, with a 7ms typical blanking time and an absolute maximum voltage of 6.5V."
      },
      {
        "number": "6",
        "name": "OUT2",
        "type": "power_out",
        "description": "Switch 2 voltage output pin; recommended maximum continuous load current is 0.5A."
      },
      {
        "number": "7",
        "name": "OUT1",
        "type": "power_out",
        "description": "Switch 1 voltage output pin; recommended maximum continuous load current is 0.5A."
      },
      {
        "number": "8",
        "name": "FLG1",
        "type": "output",
        "description": "Switch 1 over-current and over-temperature fault report; open-drain output that goes active low when triggered, with a 7ms typical blanking time and an absolute maximum voltage of 6.5V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN AP2152ASG-13 maps to package code S (SO-8) in the Ordering Information table on page 12 (AP2; The SO-8 pin-assignment diagram on page 1 is garbled in the text extraction (the printed numbers and; The SO-8 package has no exposed pad; the exposed-pad note on page 2 applies only to MSOP-8EP and U-D"
        ],
        "pages_sent": 16,
        "cost_usd": 0.075,
        "at": "2026-10-18T20:11:50"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588941642459975680",
        "pages": 16,
        "sha256": "24235dfc68b464c7",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ap2152asg-13.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ap2152asg-13-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "00cd74f5c31c0183edb55b0c3a4e51e39102d8fc14beb386369a6cde10b3322a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}