component
AP2151MPG-13
Public Made by Adomby adom
Diodes Incorporated AC-DC Controllers and Regulators, MSOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -56,19 +56,19 @@ "number": "5", "name": "FLG", "type": "output",- "description": "Over-Current and Over-Temperature fault report. Open-drain output that is active-low when a fault is triggered; typically pulled up to a logic supply through an external resistor (e.g. 10 k\u03a9). 7 ms typical blanking time filters transient faults. RFLG on-resistance \u2248 20 \u03a9."+ "description": "Over-Current and Over-Temperature fault report. Open-drain output that is active-low when a fault is triggered; typically pulled up to a logic supply through an external resistor (e.g. 10 kΩ). 7 ms typical blanking time filters transient faults. RFLG on-resistance ≈ 20 Ω." }, { "number": "6", "name": "OUT", "type": "power_out",- "description": "Switched voltage output. All OUT pins must be tied together externally. Connect an output capacitor to ground (typical bulk 120 \u00b5F plus 0.1 \u00b5F ceramic)."+ "description": "Switched voltage output. All OUT pins must be tied together externally. Connect an output capacitor to ground (typical bulk 120 µF plus 0.1 µF ceramic)." }, { "number": "7", "name": "OUT", "type": "power_out",- "description": "Switched voltage output. All OUT pins must be tied together externally. Connect an output capacitor to ground (typical bulk 120 \u00b5F plus 0.1 \u00b5F ceramic)."+ "description": "Switched voltage output. All OUT pins must be tied together externally. Connect an output capacitor to ground (typical bulk 120 µF plus 0.1 µF ceramic)." }, { "number": "8",@@ -162,5 +162,8 @@ "docs/ap2151mpg-13-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }