component
AP2141DWG-7
Public Made by Adomby adom
Diodes Incorporated Power Distribution Switches, SOT-25. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 16d ago |
| viewers | 16d ago |
| ap2141dwg-7-etched.glb | 16d ago |
| ap2141dwg-7-etched.step | 16d ago |
| ap2141dwg-7-hero.glb | 16d ago |
| ap2141dwg-7-hero.overlay.json | 16d ago |
| ap2141dwg-7.glb | 16d ago |
| ap2141dwg-7.kicad_mod | 16d ago |
| ap2141dwg-7.kicad_sym | 16d ago |
| ap2141dwg-7.lbr | 16d ago |
| ap2141dwg-7.step | 16d ago |
| package.json | 16d ago |
| page.json | 16d ago |
| README.md | 16d ago |
AP2141DWG-7
Diodes Incorporated · Power Distribution Switches · SOT-25
AP2141DWG-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Voltage output pin; all OUT pins must be tied together externally, and the output is current-limited to about 0.8 A typical (0.6 A to 1.0 A) with reverse-current blocking when the switch is disabled. |
| 2 | GND | power_in | Ground pin for the device; the datasheet gives no separate exposed-pad connection for the SOT25 package. |
| 3 | FLG | output | Over-current and over-temperature fault report; open-drain output that goes active low when triggered, after a 7 ms (typ) deglitch time, and its FET on-resistance is 20 Ω typical (40 Ω max at 10 mA). |
| 4 | EN | input | Active-low enable input on the AP2141D (switch on when pulled low); the logic-low input must be 0 V to 0.8 V and the logic-high input must be 2.0 V up to VIN. |
| 5 | IN | power_in | Voltage input pin with a 2.7 V to 5.5 V operating range (6.5 V absolute maximum); all IN pins must be tied together externally. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input UVLO | VUVLO | 1.6 | 1.9 | 2.5 | V | 4 | |
| Input Shutdown Current | ISHDN | 0.5 | 1 | µA | Disabled, IOUT = 0 | 4 | |
| Input Quiescent Current | IQ | 45 | 70 | µA | Enabled, IOUT = 0 | 4 | |
| Input Leakage Current | ILEAK | 0.1 | 1 | µA | Disabled, OUT grounded | 4 | |
| Reverse Leakage Current | IREV | 0.1 | 1 | µA | Disabled, VIN = 0V, VOUT = 5V, IREV at VIN | 4 | |
| Switch On-Resistance (SOT25) | RDS(ON) | 95 | 115 | mΩ | VIN = 5V, IOUT = 0.5A, TA = +25°C | 4 | |
| Switch On-Resistance (SOT25) | RDS(ON) | 140 | mΩ | VIN = 5V, IOUT = 0.5A, -40°C ≤ TA ≤ +85°C | 4 | ||
| Switch On-Resistance (SOT25) | RDS(ON) | 120 | 140 | mΩ | VIN = 3.3V, IOUT = 0.5A, TA = +25°C | 4 | |
| Switch On-Resistance (SOT25) | RDS(ON) | 170 | mΩ | VIN = 3.3V, IOUT = 0.5A, -40°C ≤ TA ≤ +85°C | 4 | ||
| Over-Load Current Limit | ILIMIT | 0.6 | 0.8 | 1 | A | VIN = 5V, VOUT = 4.0V, CL = 120µF, -40°C ≤ TA ≤ +85°C | 4 |
| EN Input Leakage | ISINK | 1 | µA | VEN = 5V | 4 | ||
| Output Turn-On Rise Time | tR | 0.6 | 1.5 | ms | CL = 1µF, RLOAD = 10Ω | 4 | |
| Output Turn-Off Fall Time | tF | 0.05 | 0.1 | ms | CL = 1µF, RLOAD = 10Ω | 4 | |
| FLG Output FET On-Resistance | RFLG | 20 | 40 | Ω | IFLG = 10mA | 4 | |
| FLG Blanking Time | tBLANK | 4 | 7 | 15 | ms | CIN = 10µF, CL = 22µF | 4 |
| Input Voltage | VIN | 2.7 | 5.5 | V | 3 | ||
| Output Current | IOUT | 0 | 500 | mA | 3 | ||
| Recommended Maximum Continuous Load Current | 0.5 | A | 2 | ||||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 3 | ||
| High-Level Input Voltage on EN or EN | VIH | 2 | V | 3 | |||
| Low-Level Input Voltage on EN or EN | VIL | 0 | 0.8 | V | 3 | ||
| Input Voltage | VIN | 6.5 | V | 3 | |||
| Enable Voltage | VEN, VFLG | 6.5 | V | 3 | |||
| ESD Human Body Model Protection | HBM | 4 | kV | Human Body Model | 3 | ||
| ESD Machine Model Protection | MM | 300 | V | Machine Model | 3 | ||
| Maximum Junction Temperature | TJ(MAX) | 150 | °C | 3 | |||
| Storage Temperature Range | TST | -65 | 150 | °C | Note 4: UL recognized rating is -30°C to +70°C | 3 | |
| Thermal Resistance Junction-to-Ambient (SOT25) | θJA | 170 | °C/W | Note 7: FR-4, 2oz copper, minimum recommended pad layout | 4 |
CAD (KiCad official)
- Symbol:
AP2141DWG-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
ap2141dwg-7-etched.step/ap2141dwg-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap2141dwg-7.step/ap2141dwg-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (18 pp, sha256
781650a6c67afd9a, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).