component
AP2121AK-3.3TRG1
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AP2121AK-3.3TRG1
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
AP2121AK-3.3TRG1 from Diodes Incorporated, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin; the datasheet gives a recommended input range of 2 V to 6 V, a 6.5 V absolute maximum, and requires a 1 µF input capacitor. |
| 2 | GND | power_in | Ground pin for the regulator. |
| 3 | CE | input | Active-high enable input: logic high (at least 1.5 V) enables the output and logic low (at most 0.25 V) puts the device in shutdown, with the CE input rated from -0.3 V to VIN + 0.3 V. |
| 4 | NC | unconnected | No connection on the SOT-23-5 package. |
| 5 | VOUT | power_out | Regulated output voltage; the output needs more than 1 µF of low-ESR ceramic capacitance with ESR from 0.01 Ω to 100 Ω for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 3.234 | 3.3 | 3.366 | V | VIN = 4.3V, 1mA ≤ IOUT ≤ 30mA | 13 |
| Input Voltage | VIN | 6 | V | 13 | |||
| Output Current | IOUT | 200 | mA | VIN-VOUT = 1V | 13 | ||
| Load Regulation | VRLOAD | 12 | 40 | mV | VIN = 4.3V, 1mA ≤ IOUT ≤ 80mA | 13 | |
| Line Regulation | VRLINE | 4 | 16 | mV | 3.8V ≤ VIN ≤ 6V, IOUT = 30mA | 13 | |
| Dropout Voltage | VDROP | 20 | 40 | mV | IOUT = 10mA | 13 | |
| Dropout Voltage | VDROP | 150 | 300 | mV | IOUT = 100mA | 13 | |
| Dropout Voltage | VDROP | 200 | 400 | mV | IOUT = 150mA | 13 | |
| Dropout Voltage | VDROP | 250 | 500 | mV | IOUT = 200mA | 13 | |
| Quiescent Current | IQ | 25 | 50 | µA | VIN = 4.3V, IOUT = 0mA | 13 | |
| Standby Current | ISTD | 0.1 | 1 | µA | VIN = 4.3V, VCE in OFF mode | 13 | |
| Output Voltage Temperature Coefficient | ∆VOUT/∆T | -330 | 330 | µV/oC | IOUT = 30mA | 13 | |
| Output Voltage Temperature Coefficient | (∆VOUT/VOUT)/∆T | -100 | 100 | ppm/oC | 13 | ||
| CE High Voltage | 1.5 | V | CE input voltage "High" | 13 | |||
| CE Low Voltage | 0.25 | V | CE input voltage "Low" | 13 | |||
| CE Pull-Down Resistance | RPD | 2.5 | 5 | 10 | MΩ | 13 | |
| Input Voltage | VIN | 6.5 | V | 3 | |||
| Enable Input Voltage | VCE | -0.3 | V | Rating printed as -0.3 to VIN +0.3 V; upper limit is VIN-relative, not a fixed number | 3 | ||
| Output Current | IOUT | 300 | mA | 3 | |||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| Lead Temperature | TLEAD | 260 | °C | Soldering, 10 sec | 3 | ||
| ESD Human Body Model | ESD | 2000 | V | Human Body Model | 3 | ||
| ESD Machine Model | ESD | 200 | V | Machine Model | 3 | ||
| Input Voltage | VIN | 2 | 6 | V | 3 | ||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Thermal Resistance (Junction to Ambient), SOT-23-5 | θJA | 250 | °C/W | Junction to ambient, Note 3 | 3 | ||
| Thermal Resistance (Junction to Case), SOT-23-5 | θJC | 74 | °C/W | Junction to case | 13 |
CAD (KiCad official)
- Symbol:
AP2121AK-3.3TRG1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ap2121ak-3-3trg1-etched.step/ap2121ak-3-3trg1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap2121ak-3-3trg1.step/ap2121ak-3-3trg1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (28 pp, sha256
41e2a9b4a27eea83, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AP2121AK-3.3TRG1
**Diodes Incorporated** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
AP2121AK-3.3TRG1 from Diodes Incorporated, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin; the datasheet gives a recommended input range of 2 V to 6 V, a 6.5 V absolute maximum, and requires a 1 µF input capacitor. |
| 2 | GND | power_in | Ground pin for the regulator. |
| 3 | CE | input | Active-high enable input: logic high (at least 1.5 V) enables the output and logic low (at most 0.25 V) puts the device in shutdown, with the CE input rated from -0.3 V to VIN + 0.3 V. |
| 4 | NC | unconnected | No connection on the SOT-23-5 package. |
| 5 | VOUT | power_out | Regulated output voltage; the output needs more than 1 µF of low-ESR ceramic capacitance with ESR from 0.01 Ω to 100 Ω for stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 3.234 | 3.3 | 3.366 | V | VIN = 4.3V, 1mA ≤ IOUT ≤ 30mA | 13 |
| Input Voltage | VIN | | | 6 | V | | 13 |
| Output Current | IOUT | 200 | | | mA | VIN-VOUT = 1V | 13 |
| Load Regulation | VRLOAD | | 12 | 40 | mV | VIN = 4.3V, 1mA ≤ IOUT ≤ 80mA | 13 |
| Line Regulation | VRLINE | | 4 | 16 | mV | 3.8V ≤ VIN ≤ 6V, IOUT = 30mA | 13 |
| Dropout Voltage | VDROP | | 20 | 40 | mV | IOUT = 10mA | 13 |
| Dropout Voltage | VDROP | | 150 | 300 | mV | IOUT = 100mA | 13 |
| Dropout Voltage | VDROP | | 200 | 400 | mV | IOUT = 150mA | 13 |
| Dropout Voltage | VDROP | | 250 | 500 | mV | IOUT = 200mA | 13 |
| Quiescent Current | IQ | | 25 | 50 | µA | VIN = 4.3V, IOUT = 0mA | 13 |
| Standby Current | ISTD | | 0.1 | 1 | µA | VIN = 4.3V, VCE in OFF mode | 13 |
| Output Voltage Temperature Coefficient | ∆VOUT/∆T | -330 | | 330 | µV/oC | IOUT = 30mA | 13 |
| Output Voltage Temperature Coefficient | (∆VOUT/VOUT)/∆T | -100 | | 100 | ppm/oC | | 13 |
| CE High Voltage | | 1.5 | | | V | CE input voltage "High" | 13 |
| CE Low Voltage | | | | 0.25 | V | CE input voltage "Low" | 13 |
| CE Pull-Down Resistance | RPD | 2.5 | 5 | 10 | MΩ | | 13 |
| Input Voltage | VIN | | | 6.5 | V | | 3 |
| Enable Input Voltage | VCE | -0.3 | | | V | Rating printed as -0.3 to VIN +0.3 V; upper limit is VIN-relative, not a fixed number | 3 |
| Output Current | IOUT | | | 300 | mA | | 3 |
| Junction Temperature | TJ | | | 150 | °C | | 3 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 3 |
| Lead Temperature | TLEAD | | | 260 | °C | Soldering, 10 sec | 3 |
| ESD Human Body Model | ESD | | | 2000 | V | Human Body Model | 3 |
| ESD Machine Model | ESD | | | 200 | V | Machine Model | 3 |
| Input Voltage | VIN | 2 | | 6 | V | | 3 |
| Operating Ambient Temperature Range | TA | -40 | | 85 | °C | | 3 |
| Thermal Resistance (Junction to Ambient), SOT-23-5 | θJA | | | 250 | °C/W | Junction to ambient, Note 3 | 3 |
| Thermal Resistance (Junction to Case), SOT-23-5 | θJC | | 74 | | °C/W | Junction to case | 13 |
## CAD (KiCad official)
- Symbol: `AP2121AK-3.3TRG1`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `ap2121ak-3-3trg1-etched.step` / `ap2121ak-3-3trg1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ap2121ak-3-3trg1.step` / `ap2121ak-3-3trg1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560093409076936704) (28 pp, sha256 `41e2a9b4a27eea83`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ap2121ak-3-3trg1-datasheet.pdf)