component
AP2115R5-3.3TRG1
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-89-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AP2115R5-3.3TRG1
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-5
AP2115R5-3.3TRG1 from Diodes Incorporated, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection; the datasheet's SOT-89-5 table lists this pin as NC/EN, and its SOIC-8 mapping (pins 2, 3, 4 = NC) indicates it is the no-connect pin, with EN on pin 3. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | EN | input | Chip enable: H for normal operation and L for shutdown of the output; the EN pull-down resistor RPD is 3.0 MΩ. |
| 4 | VIN | power_in | Input voltage; the recommended supply range is 2.5 V to 6.0 V and the absolute maximum is 6.5 V. |
| 5 | VOUT | power_out | Regulated 3.3 V fixed output that supplies up to a guaranteed 1 A minimum continuous load current, with 50 mA fold-back short-circuit current limit. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-89-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 98.5 | 3.3 | 101.5 | %×VOUT | VIN =4.3V, 1mA ≤ IOUT ≤ 30mA | 9 |
| Maximum Output Current | IOUT(MAX) | 1 | A | VIN =4.3V, VOUT=3.25V to 3.35V | 9 | ||
| Load Regulation | ΔVOUT/VOUT/ΔIOUT | 0.2 | 1 | %/A | VIN=4.3V, 1mA ≤ IOUT ≤1A | 9 | |
| Line Regulation | ΔVOUT/VOUT/ΔVIN | -0.1 | 0.02 | 0.1 | %/V | 4.3V≤VIN≤6V, IOUT=30mA | 9 |
| Dropout Voltage | VDROP | 450 | 750 | mV | IOUT=1A | 9 | |
| Quiescent Current | IQ | 65 | 90 | µA | VIN=4.3V, IOUT=0mA | 9 | |
| Output Voltage Temperature Coefficient | ΔVOUT/VOUT/ΔT | -30 | 30 | ppm/°C | IOUT=30mA, TA =-40°C to 85°C | 9 | |
| EN High Voltage | VIH | 1.5 | V | Enable logic high, regulator on | 9 | ||
| EN Low Voltage | VIL | 0.4 | V | Enable logic low, regulator off | 9 | ||
| Standby Current | ISTD | 0.01 | 1 | µA | VIN=3.5V, VEN in OFF mode | 9 | |
| Supply Voltage | VIN | 2.5 | 6 | V | 5 | ||
| Ambient Operation Temperature Range | TA | -40 | 85 | °C | 5 | ||
| Power Supply Voltage | VCC | 6.5 | V | 5 | |||
| Operating Junction Temperature Range | TJ | 150 | ºC | 5 | |||
| Storage Temperature Range | TSTG | -65 | 150 | ºC | 5 | ||
| Lead Temperature (Soldering) | TLEAD | 260 | ºC | Soldering, 10 Seconds | 5 | ||
| ESD (Machine Model) | 400 | V | Machine Model | 5 | |||
| ESD (Human Body Model) | 4000 | V | Human Body Model | 5 | |||
| Thermal Resistance (SOT-89-5) | θJC | 47 | °C/W | SOT-89-5 package | 9 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | ESD (Human Body Model) 4000 V Note 1: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to | 5 |
CAD (KiCad official)
- Symbol:
AP2115R5-3.3TRG1 - Footprint:
Package_TO_SOT_SMD:SOT-89-5 - 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files:
ap2115r5-3-3trg1-etched.step/ap2115r5-3-3trg1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap2115r5-3-3trg1.step/ap2115r5-3-3trg1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (19 pp, sha256
65fa295815d408d7, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AP2115R5-3.3TRG1
**Diodes Incorporated** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-5
AP2115R5-3.3TRG1 from Diodes Incorporated, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection; the datasheet's SOT-89-5 table lists this pin as NC/EN, and its SOIC-8 mapping (pins 2, 3, 4 = NC) indicates it is the no-connect pin, with EN on pin 3. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | EN | input | Chip enable: H for normal operation and L for shutdown of the output; the EN pull-down resistor RPD is 3.0 MΩ. |
| 4 | VIN | power_in | Input voltage; the recommended supply range is 2.5 V to 6.0 V and the absolute maximum is 6.5 V. |
| 5 | VOUT | power_out | Regulated 3.3 V fixed output that supplies up to a guaranteed 1 A minimum continuous load current, with 50 mA fold-back short-circuit current limit. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-89-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 98.5 | 3.3 | 101.5 | %×VOUT | VIN =4.3V, 1mA ≤ IOUT ≤ 30mA | 9 |
| Maximum Output Current | IOUT(MAX) | 1 | | | A | VIN =4.3V, VOUT=3.25V to 3.35V | 9 |
| Load Regulation | ΔVOUT/VOUT/ΔIOUT | | 0.2 | 1 | %/A | VIN=4.3V, 1mA ≤ IOUT ≤1A | 9 |
| Line Regulation | ΔVOUT/VOUT/ΔVIN | -0.1 | 0.02 | 0.1 | %/V | 4.3V≤VIN≤6V, IOUT=30mA | 9 |
| Dropout Voltage | VDROP | | 450 | 750 | mV | IOUT=1A | 9 |
| Quiescent Current | IQ | | 65 | 90 | µA | VIN=4.3V, IOUT=0mA | 9 |
| Output Voltage Temperature Coefficient | ΔVOUT/VOUT/ΔT | -30 | | 30 | ppm/°C | IOUT=30mA, TA =-40°C to 85°C | 9 |
| EN High Voltage | VIH | 1.5 | | | V | Enable logic high, regulator on | 9 |
| EN Low Voltage | VIL | | | 0.4 | V | Enable logic low, regulator off | 9 |
| Standby Current | ISTD | | 0.01 | 1 | µA | VIN=3.5V, VEN in OFF mode | 9 |
| Supply Voltage | VIN | 2.5 | | 6 | V | | 5 |
| Ambient Operation Temperature Range | TA | -40 | | 85 | °C | | 5 |
| Power Supply Voltage | VCC | | | 6.5 | V | | 5 |
| Operating Junction Temperature Range | TJ | | | 150 | ºC | | 5 |
| Storage Temperature Range | TSTG | -65 | | 150 | ºC | | 5 |
| Lead Temperature (Soldering) | TLEAD | | | 260 | ºC | Soldering, 10 Seconds | 5 |
| ESD (Machine Model) | | | | 400 | V | Machine Model | 5 |
| ESD (Human Body Model) | | | | 4000 | V | Human Body Model | 5 |
| Thermal Resistance (SOT-89-5) | θJC | | 47 | | °C/W | SOT-89-5 package | 9 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | | ESD (Human Body Model) 4000 V Note 1: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to | 5 |
## CAD (KiCad official)
- Symbol: `AP2115R5-3.3TRG1`
- Footprint: `Package_TO_SOT_SMD:SOT-89-5`
- 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files: `ap2115r5-3-3trg1-etched.step` / `ap2115r5-3-3trg1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ap2115r5-3-3trg1.step` / `ap2115r5-3-3trg1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588911735151734784) (19 pp, sha256 `65fa295815d408d7`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ap2115r5-3-3trg1-datasheet.pdf)