AP1534SG-13

@@ -0,0 +1,260 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "AP1534SG-13",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 8,+      "span_mm": 6.9,+      "dash_mm": 0.1725,+      "gap_mm": 0.1035,+      "pad_stroke_mm": 0.0414+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 8,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.552,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.0,+      3.0,+      -2.11,+      2.11+    ],+    "pads_bbox_mm": [+      -3.45,+      3.45,+      -2.205,+      2.205+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "ap1534sg-13-etched.glb",+    "glb_sha256": "8b2c04fdf26c6009c3b2f5e53f2783508b11669eb2ee174812acaf41afa4e79e",+    "footprint": "ap1534sg-13.kicad_mod",+    "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+    "pins": "page.json component.pins",+    "pins_sha256": "34e995b0a2487e6d2ce0fcf9536d347ca17e1294294e2fafa17bd25553573b96"+  },+  "generator": "adom-wiki 1.8.24 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "FB",+      "x": -3.6,+      "y": -1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "EN",+      "x": -3.6,+      "y": -0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "OCSET",+      "x": -3.6,+      "y": 0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "4",+      "text": "VCC",+      "x": -3.6,+      "y": 1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "5",+      "text": "Output",+      "x": 3.6,+      "y": 1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "6",+      "text": "Output",+      "x": 3.6,+      "y": 0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "7",+      "text": "VSS",+      "x": 3.6,+      "y": -0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "8",+      "text": "VSS",+      "x": 3.6,+      "y": -1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    }+  ]+}

@@ -1,6 +1,6 @@ {   "slug": "ap1534sg-13",-  "version": "0.2.0",+  "version": "0.2.1",   "type": "component",   "description": "Diodes Incorporated DC-DC Converters, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -20,11 +20,172 @@     "ap1534sg-13.kicad_mod",     "ap1534sg-13.glb",     "ap1534sg-13.step",+    "ap1534sg-13-etched.step",     "ap1534sg-13.lbr",     "docs/hero.png",     "docs/ap1534sg-13-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "pads.json"-  ]-}\ No newline at end of file+    "pads.json",+    "ap1534sg-13-etched.glb",+    "ap1534sg-13-hero.glb",+    "ap1534sg-13-hero.overlay.json"+  ],+  "component": {+    "mpn": "AP1534SG-13",+    "manufacturer": "Diodes Incorporated",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "PMIC",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.diodes.com/assets/Datasheets/AP1534SG-13.pdf",+    "parts": {+      "symbol": "ap1534sg-13.kicad_sym",+      "footprint": "ap1534sg-13.kicad_mod",+      "model_3d": "ap1534sg-13-hero.glb",+      "model_3d_plain": "ap1534sg-13.glb",+      "model_3d_step": "ap1534sg-13-etched.step",+      "model_3d_step_plain": "ap1534sg-13.step",+      "lbr": "ap1534sg-13.lbr"+    },+    "distributor_links": {+      "lcsc": "C110462"+    },+    "pins": [+      {+        "number": "1",+        "name": "FB",+        "type": "input",+        "description": "Feedback pin. Connect to an external resistor divider from VOUT; internal error amplifier regulates this node to VFB = 0.8V (typ, 0.784-0.816V). VOUT = VFB x (1 + RA/RB), with RB in the 0.7k-5kΩ range."+      },+      {+        "number": "2",+        "name": "EN",+        "type": "input",+        "description": "Enable / power-off pin. Logic High (VIH >= 2.0V) enables normal step-down operation; Logic Low (VIL <= 0.8V) stops step-down operation and deactivates all internal circuits. Input leakage typ +20 / -10 uA."+      },+      {+        "number": "3",+        "name": "OCSET",+        "type": "input",+        "description": "Over-current setpoint. Add an external resistor to VCC to set the maximum output current threshold. OCSET pin bias current typ 90 uA (75-105 uA)."+      },+      {+        "number": "4",+        "name": "VCC",+        "type": "power_in",+        "description": "IC power supply pin. Input voltage range 3.6V to 18V (absolute max VSS-0.3 to VSS+20V). Bypass locally with a ceramic capacitor (e.g. 0.1 uF) close to the pin."+      },+      {+        "number": "5",+        "name": "Output",+        "type": "output",+        "description": "Switch node output (drain of internal P-channel power MOSFET). Connect the external inductor and freewheeling Schottky diode here. Pins 5 and 6 are internally tied; minimize trace/copper area to reduce EMI."+      },+      {+        "number": "6",+        "name": "Output",+        "type": "output",+        "description": "Switch node output (drain of internal P-channel power MOSFET). Connect the external inductor and freewheeling Schottky diode here. Pins 5 and 6 are internally tied; minimize trace/copper area to reduce EMI."+      },+      {+        "number": "7",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground return pin. Pins 7 and 8 are internally tied and must both be connected to the PCB ground plane for proper current return and thermal dissipation."+      },+      {+        "number": "8",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground return pin. Pins 7 and 8 are internally tied and must both be connected to the PCB ground plane for proper current return and thermal dissipation."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.diodes.com/assets/Datasheets/AP1534SG-13.pdf",+        "pages": 11,+        "sha256": "81e2089489abd7a2",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "pin1": {+      "pad": "1",+      "at": [+        -2.475,+        -1.905+      ],+      "corner": "top-left",+      "source": "silk-marker",+      "derived_from": "SOIC-8_3.9x4.9mm_P1.27mm@sha256:074ecb2092b24fa4",+      "mark": "drawn"+    },+    "models_3d": [+      {+        "file": "ap1534sg-13.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6,+          4.9,+          1.75+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ap1534sg-13-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "b1886ee802a8092261c37cfefd0d22272c2ecaac33818de08ec7a996fd19b896",+        "checked": "2026-11-13",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "title": "AP1534SG-13",+  "brief": "Diodes Incorporated DC-DC Converters, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+  "metadata": {+    "specs": {+      "Manufacturer": "Diodes Incorporated",+      "Package": "SOP-8",+      "Category": "PMIC",+      "Pins": "8"+    }+  },+  "discovery_triggers": [+    "ap1534sg-13"+  ],+  "discovery_pitch": "AP1534SG-13 (Diodes Incorporated) component page with datasheet-verified CAD.",+  "visibility": "public"+}