AP1501S-ADJRG

{
  "slug": "ap1501s-adjrg",
  "version": "0.1.0",
  "type": "component",
  "description": "HANSCHIP semiconductor DC-DC Converters, TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ap1501s-adjrg",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ap1501s-adjrg.kicad_sym",
    "ap1501s-adjrg.kicad_mod",
    "ap1501s-adjrg.glb",
    "ap1501s-adjrg.step",
    "ap1501s-adjrg.lbr",
    "docs/hero.png",
    "docs/ap1501s-adjrg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ap1501s-adjrg-hero.glb",
    "ap1501s-adjrg-hero.overlay.json",
    "ap1501s-adjrg-etched.glb"
  ],
  "component": {
    "mpn": "AP1501S-ADJRG",
    "manufacturer": "HANSCHIP semiconductor",
    "package": "TO-263-5",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590233792741863424",
    "parts": {
      "symbol": "ap1501s-adjrg.kicad_sym",
      "footprint": "ap1501s-adjrg.kicad_mod",
      "model_3d": "ap1501s-adjrg-hero.glb",
      "model_3d_plain": "ap1501s-adjrg-etched.glb",
      "model_3d_step": "ap1501s-adjrg-etched.step",
      "model_3d_step_plain": "ap1501s-adjrg.step",
      "lbr": "ap1501s-adjrg.lbr"
    },
    "distributor_links": {
      "lcsc": "C2977122"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T05:20:41Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply input pin that requires a DC supply of 4.5 V to 40 V, with a large-value capacitor connected in parallel between this pin and ground to filter supply noise."
      },
      {
        "number": "2",
        "name": "OUTPUT",
        "type": "output",
        "description": "Power switch output pin that acts as the switching node driving the output load, with the datasheet's absolute maximum voltage on this pin being -0.3 V to VIN."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that should be routed on the output-capacitor ground path outside the Schottky diode path so that switching-current spikes do not add noise to the circuit."
      },
      {
        "number": "4",
        "name": "FEEDBACK",
        "type": "input",
        "description": "Voltage feedback pin that senses the output through an external resistor divider, with a regulation threshold of 1.23 V, and absolute maximum range of -0.3 V to VIN."
      },
      {
        "number": "5",
        "name": "ON_OFF",
        "type": "input",
        "description": "Enable pin where a low level turns the regulator on and a high level turns it off, with the pin defaulting to low when floating, and a switch-pin threshold of 1.4 V (high) / 0.8 V (low)."
      },
      {
        "number": "6",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin table (page 5) is the only pinout source; it is given for the TO-220-5L/TO-263-5L family and the; The VIN pin description in the datasheet refers to 'SA2596' instead of AP1501, which appears to be a; Pin types for OUTPUT (output), FEEDBACK (input) and GND (power_in) are mapped to KiCad classes from ",
          "exposed pad 6 added from the footprint"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0364,
        "at": "2026-10-19T05:18:33"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590233792741863424",
        "pages": 9,
        "sha256": "0b36282e098a7e0b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ap1501s-adjrg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          15.0,
          10.0,
          4.42
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "94c2a3dc1aaad85b6b5193f97d9a7c61b4e28bac25952a1e629557bcf747e246",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ap1501s-adjrg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          15.0,
          10.0,
          4.42
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "675750dd39d4f126ff0fe827f028e1d966fb3c4f9c2b5a83f0e18ebe81b51106",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}