component
AP1501A-12K5G-13
Public Made by Adomby adom
Diodes Incorporated DC-DC Converters, TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 12d ago |
| viewers | 12d ago |
| ap1501a-12k5g-13-etched.glb | 12d ago |
| ap1501a-12k5g-13-etched.step | 12d ago |
| ap1501a-12k5g-13-hero.glb | 12d ago |
| ap1501a-12k5g-13-hero.overlay.json | 12d ago |
| ap1501a-12k5g-13.glb | 12d ago |
| ap1501a-12k5g-13.kicad_mod | 12d ago |
| ap1501a-12k5g-13.kicad_sym | 12d ago |
| ap1501a-12k5g-13.lbr | 12d ago |
| ap1501a-12k5g-13.step | 12d ago |
| package.json | 12d ago |
| page.json | 12d ago |
| README.md | 12d ago |
AP1501A-12K5G-13
Diodes Incorporated · DC-DC Converters · TO-263-5
AP1501A-12K5G-13 from Diodes Incorporated, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Operating voltage input (4.5V to 40V operating range); needs a suitable input bypass capacitor to minimize voltage transients and supply switching currents. |
| 2 | Output | output | Switching output of the internal 5A switch, swinging between (+VIN - VSAT) and approximately -0.5V; keep PC board copper area on this pin to a minimum. |
| 3 | Gnd | power_in | Circuit ground. |
| 4 | FB | input | Output voltage feedback control that senses the regulated output voltage to complete the feedback loop (-0.3 to +40V). |
| 5 | SD | input | ON/OFF shutdown input: below approximately 1.3V the regulator is on, above 1.3V (up to 40V max) it shuts down to about 150µA; if unused, tie to ground or leave open. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TO-263-5 |
| Category | Power Management ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (12V version, full temp range) | VOUT | 11.4 | 12 | 12.6 | V | 15V < VIN < 40V, 0.2A < ILOAD < 5A | 7 |
| Output Voltage (12V version, 25°C) | VOUT | 11.52 | 12 | 12.48 | V | 15V < VIN < 40V, 0.2A < ILOAD < 5A | 7 |
| Efficiency | η | 88 | % | VIN = 16V, ILOAD = 5A | 7 | ||
| Oscillator Frequency (25°C) | fOSC | 127 | 150 | 173 | kHz | 6 | |
| Oscillator Frequency (full temp range) | fOSC | 110 | 173 | kHz | 6 | ||
| Saturation Voltage | VSAT | 1.5 | 1.7 | V | IOUT = 5A, No outside circuit, VFB = 0V force driver on | 6 | |
| Max. Duty Cycle (ON) | DC | 100 | % | VFB = 0V force driver on | 6 | ||
| Min. Duty Cycle (OFF) | 0 | % | VFB = 12V force driver off | 6 | |||
| Current Limit | ICL | 5.5 | 6 | 7.5 | A | Peak current, No outside circuit, VFB = 0 force driver on | 6 |
| Output Leakage Current | IL | 200 | µA | Output = 0V, No outside circuit, VFB = 12V force driver off | 6 | ||
| Output Leakage Current | IL | 2 | 60 | mA | Output = -1V, VIN = 40V | 6 | |
| Quiescent Current | IQ | 5 | 10 | mA | VFB = 12V force driver off | 6 | |
| Standby Quiescent Current | ISTBY | 150 | 300 | µA | SD pin = 5V, VIN = 40V | 6 | |
| SD Pin Logic Input Threshold Low (regulator ON) | VIL | 1.3 | 0.6 | V | 6 | ||
| SD Pin Logic Input Threshold High (regulator OFF) | VIH | 2 | 1.3 | V | 6 | ||
| SD Pin Logic Input Current | IH | 15 | 25 | µA | VLOGIC = 2.5V (OFF) | 6 | |
| SD Pin Input Current | IL | 0.02 | 5 | µA | VLOGIC = 0.5V (ON) | 6 | |
| Thermal Resistance Junction-to-Ambient | θJA | 37 | °C/W | TO263-5, ~3 inch2 1oz copper, no air flow | 6 | ||
| Thermal Resistance Junction-to-Case | θJC | 6 | °C/W | TO263-5, ~3 inch2 1oz copper, no air flow | 6 | ||
| Supply Voltage | VCC | 45 | V | 5 | |||
| SD Pin Input Voltage | VSD | -0.3 | 40 | V | 5 | ||
| FB Pin Voltage | VFB | -0.3 | 40 | V | 5 | ||
| Output Voltage to Ground | VOUT | -1 | V | 5 | |||
| Storage Temperature | TST | -65 | 150 | °C | 5 | ||
| Operating Junction Temperature | TJ | -20 | 125 | °C | 5 | ||
| ESD Machine Model | ESD MM | 400 | V | 5 | |||
| Operating Voltage | VOP | 4.5 | 40 | V | 5 | ||
| Operating Ambient Temperature | TA | -20 | 85 | °C | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | Internal switch. The voltage at this pin switches between (+VIN - VSAT) and approximately -0.5V, with a duty cycle of approximately VOUT / VIN. To minimize coupling to sensitive circuitry, the PC boar | 10 |
CAD (KiCad official)
- Symbol:
AP1501A-12K5G-13 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
ap1501a-12k5g-13-etched.step/ap1501a-12k5g-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap1501a-12k5g-13.step/ap1501a-12k5g-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (15 pp, sha256
fa7559b35d7e0cbe, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).