AP1013CEN

{
  "slug": "ap1013cen",
  "version": "0.1.0",
  "type": "component",
  "description": "Asahi Kasei Microdevices Gate Drive ICs, QFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "ap1013cen",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ap1013cen.kicad_sym",
    "ap1013cen.kicad_mod",
    "ap1013cen.glb",
    "ap1013cen.step",
    "ap1013cen.lbr",
    "docs/hero.png",
    "docs/ap1013cen-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ap1013cen-hero.glb",
    "ap1013cen-hero.overlay.json",
    "ap1013cen-etched.glb"
  ],
  "component": {
    "mpn": "AP1013CEN",
    "manufacturer": "Asahi Kasei Microdevices",
    "package": "QFN-16-EP(3x3)",
    "pin_count": 17,
    "category": "Power Management ICs",
    "subcategory": "Gate Drive ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/c739a7e4407b9b1abd3dbd044bca7f33.pdf",
    "parts": {
      "symbol": "ap1013cen.kicad_sym",
      "footprint": "ap1013cen.kicad_mod",
      "model_3d": "ap1013cen-hero.glb",
      "model_3d_plain": "ap1013cen-etched.glb",
      "model_3d_step": "ap1013cen-etched.step",
      "model_3d_step_plain": "ap1013cen.step",
      "lbr": "ap1013cen.lbr"
    },
    "distributor_links": {
      "lcsc": "C2653456",
      "digikey": "AP1013CENTR-ND"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T09:23:09Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "AP1013CENTR-ND",
        "status": "found",
        "lifecycle": "Not For New Designs"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PSAVE",
        "type": "input",
        "description": "Power save input with 100kΩ pull-up; high puts OUTA/OUTB in Hi-Z and shuts down TSD/UVLO/VREF/OSC/charge pump."
      },
      {
        "number": "2",
        "name": "DGND",
        "type": "power_in",
        "description": "Ground terminal for the control and logic circuits."
      },
      {
        "number": "3",
        "name": "VG",
        "type": "passive",
        "description": "Connection for the charge pump output capacitor (CVG 0.047-0.22µF, typ 0.1µF); VG=VC+VM about 18.2V typ, absolute maximum 25V."
      },
      {
        "number": "4",
        "name": "CH",
        "type": "passive",
        "description": "Connection for the charge pump capacitor (CHL 0.047-0.22µF, typ 0.1µF); absolute maximum voltage 25V."
      },
      {
        "number": "5",
        "name": "CL",
        "type": "passive",
        "description": "Connection for the charge pump capacitor (CHL 0.047-0.22µF, typ 0.1µF), the other terminal of the pump capacitor from CH."
      },
      {
        "number": "6",
        "name": "VC",
        "type": "power_in",
        "description": "Control power supply terminal, 2.7V to 5.5V recommended (absolute maximum 6V), with 0.1µF min bypass capacitor."
      },
      {
        "number": "7",
        "name": "VIO",
        "type": "power_in",
        "description": "Logic input power supply terminal, 1.62V to VC (absolute maximum 6V); inputs are treated as low until VIO is applied."
      },
      {
        "number": "8",
        "name": "OUTA",
        "type": "output",
        "description": "Motor driver output A (pins 8 and 9 tied together), 1.3A DC maximum output current."
      },
      {
        "number": "9",
        "name": "OUTA",
        "type": "output",
        "description": "Motor driver output A (pins 8 and 9 tied together), 1.3A DC maximum output current."
      },
      {
        "number": "10",
        "name": "VM",
        "type": "power_in",
        "description": "Motor driver power supply (pins 10 and 11 tied together), 2V to 18V recommended, absolute maximum 19V."
      },
      {
        "number": "11",
        "name": "VM",
        "type": "power_in",
        "description": "Motor driver power supply (pins 10 and 11 tied together), 2V to 18V recommended, absolute maximum 19V."
      },
      {
        "number": "12",
        "name": "OUTB",
        "type": "output",
        "description": "Motor driver output B (pins 12 and 13 tied together), 1.3A DC maximum output current."
      },
      {
        "number": "13",
        "name": "OUTB",
        "type": "output",
        "description": "Motor driver output B (pins 12 and 13 tied together), 1.3A DC maximum output current."
      },
      {
        "number": "14",
        "name": "INA",
        "type": "input",
        "description": "Control signal input A that sets the H-bridge drive mode, with input frequency up to 200kHz."
      },
      {
        "number": "15",
        "name": "INB",
        "type": "input",
        "description": "Control signal input B that sets the H-bridge drive mode, with input frequency up to 200kHz."
      },
      {
        "number": "16",
        "name": "EN",
        "type": "input",
        "description": "Enable signal input with 100kΩ pull-up; low gives outputs low (stop) with OSC and charge pump operating."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pins 3, 4 and 5 (VG, CH, CL) are listed as O (output) in the datasheet, but they are capacitor conne; The package pin numbers for EP are printed as 'EP', not a number. The datasheet gives no specific nu; The datasheet's pin figure and the pin table were extracted without a clear mapping for pin 13. The "
        ],
        "pages_sent": 15,
        "cost_usd": 0.1028,
        "at": "2026-10-23T09:22:57"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/c739a7e4407b9b1abd3dbd044bca7f33.pdf",
        "pages": 15,
        "sha256": "3dc5ab8c8d1e611e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ap1013cen.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ap1013cen-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.785
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1ad267752fbe8122cb4f8cd8c67056015d75d78037fe796034244288db31a866",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}