# AP1013CEN

**Asahi Kasei Microdevices** · Gate Drive ICs · QFN-16-EP(3x3)

AP1013CEN from Asahi Kasei Microdevices, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PSAVE | input | Power save input with 100kΩ pull-up; high puts OUTA/OUTB in Hi-Z and shuts down TSD/UVLO/VREF/OSC/charge pump. |
| 2 | DGND | power_in | Ground terminal for the control and logic circuits. |
| 3 | VG | passive | Connection for the charge pump output capacitor (CVG 0.047-0.22µF, typ 0.1µF); VG=VC+VM about 18.2V typ, absolute maximum 25V. |
| 4 | CH | passive | Connection for the charge pump capacitor (CHL 0.047-0.22µF, typ 0.1µF); absolute maximum voltage 25V. |
| 5 | CL | passive | Connection for the charge pump capacitor (CHL 0.047-0.22µF, typ 0.1µF), the other terminal of the pump capacitor from CH. |
| 6 | VC | power_in | Control power supply terminal, 2.7V to 5.5V recommended (absolute maximum 6V), with 0.1µF min bypass capacitor. |
| 7 | VIO | power_in | Logic input power supply terminal, 1.62V to VC (absolute maximum 6V); inputs are treated as low until VIO is applied. |
| 8 | OUTA | output | Motor driver output A (pins 8 and 9 tied together), 1.3A DC maximum output current. |
| 9 | OUTA | output | Motor driver output A (pins 8 and 9 tied together), 1.3A DC maximum output current. |
| 10 | VM | power_in | Motor driver power supply (pins 10 and 11 tied together), 2V to 18V recommended, absolute maximum 19V. |
| 11 | VM | power_in | Motor driver power supply (pins 10 and 11 tied together), 2V to 18V recommended, absolute maximum 19V. |
| 12 | OUTB | output | Motor driver output B (pins 12 and 13 tied together), 1.3A DC maximum output current. |
| 13 | OUTB | output | Motor driver output B (pins 12 and 13 tied together), 1.3A DC maximum output current. |
| 14 | INA | input | Control signal input A that sets the H-bridge drive mode, with input frequency up to 200kHz. |
| 15 | INB | input | Control signal input B that sets the H-bridge drive mode, with input frequency up to 200kHz. |
| 16 | EN | input | Enable signal input with 100kΩ pull-up; low gives outputs low (stop) with OSC and charge pump operating. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Asahi Kasei Microdevices |
| Package | QFN-16-EP(3x3) |
| Category | Power Management ICs |
| Pins | 17 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Control power supply voltage | VC | -0.5 |  | 6 | V |  | 6 |
| Logic terminal supply voltage | VIO | -0.5 |  | 6 | V |  | 6 |
| Motor driver power supply voltage | VM | -0.5 |  | 19 | V |  | 6 |
| VC, VIO level terminal voltage | Vterminal1 | -0.5 |  | 5.5 | V |  | 6 |
| VM level terminal voltage (OUTA, OUTB) | Vterminal2 | -0.5 |  | 19 | V |  | 6 |
| VG, CH terminal voltage | Vterminal3 | -0.5 |  | 25 | V |  | 6 |
| Maximum DC output current | IloaddcMD |  |  | 1.3 | A | OUTA and OUTB terminal | 6 |
| Maximum peak output current | IloadpeakMD |  |  | 2.2 | A | Under 10ms in 200ms | 6 |
| Maximum peak output current | IloadpeakMD |  |  | 3.3 | A | Under 5ms in 200ms | 6 |
| Maximum peak output current | IloadpeakMD |  |  | 5 | A | Under 2ms in 200ms | 6 |
| Power dissipation | PD |  |  | 2083 | mW | Ta=25℃ (Note 4) | 6 |
| Power dissipation | PD |  |  | 1083 | mW | Ta=85℃ (Note 4) | 6 |
| Operating temperature range | Ta | -30 |  | 85 | ℃ |  | 6 |
| Junction temperature | Tj |  |  | 150 | ℃ |  | 6 |
| Storage temperature | Tstg | -65 |  | 150 | ℃ |  | 6 |
| Thermal resistance junction to ambient | RθJ |  | 60 |  | ℃/W | 2-layer board, EP connected to ground | 6 |
| Control power supply voltage | VC | 2.7 | 3.3 | 5.5 | V |  | 7 |
| Logic terminal supply voltage | VIO | 1.62 |  |  | V | typ printed 1.8/3.3, max printed VC | 7 |
| Motor driver power supply voltage | VM | 2 |  | 18 | V |  | 7 |
| Input frequency range | Fin |  |  | 200 | kHz |  | 7 |
| Charge pump voltage | VG | 18 | 18.2 | 18.3 | V | VG=VC+VM | 7 |
| Charge pump wake up time | tVG | 0.1 | 0.36 | 3 | ms | VG=VC+VM-0.3V | 7 |
| VC under voltage detect voltage | VCDETLV | 1.9 | 2.2 | 2.5 | V |  | 7 |
| Thermal shut down temperature | TDET | 150 | 175 | 200 | ℃ | Note 7 | 7 |
| Temperature hysteresis | TDETHYS | 20 | 30 | 40 | ℃ | Note 7 | 7 |
| VM quiescent current at no power | IVMNOPOW |  |  | 1 | µA | VC=0V | 7 |
| VM quiescent current at standby | IVMSTBY |  | 16 | 50 | µA | PSAVE="L", EN="H", INA="L", INB="L" | 7 |
| VC quiescent current at standby | IVCSTBY |  | 150 | 400 | µA | PSAVE="L", EN="H", INA="L", INB="L" | 7 |
| VC quiescent current at power save | IVMPSAVE |  |  | 1 | µA | PSAVE="H", EN="H" | 7 |
| VC quiescent current at PWM operation | IVCPWM |  | 0.5 | 0.8 | mA | INA=200kHz, INB="H" | 7 |
| Driver on resistance (High side or Low side) | RON1 |  | 0.19 | 0.27 | Ω | VC=3.3V, Iload=100mA, Ta=25C | 7 |
| Driver on resistance (High side or Low side) | RON2 |  | 0.21 | 0.29 | Ω | VC=3.3V, Iload=1.0A, Ta=25C (Equivalent Tj=50C) | 7 |
| Driver on resistance (High side or Low side) | RON3 |  | 0.25 | 0.35 | Ω | VC=3.3V, Iload=1.0A, Ta=85C (Equivalent Tj=115C) | 7 |
| Body diode forward voltage | VFMD |  | 0.8 | 1.2 | V | IF=100mA | 8 |
| H-Bridge propagation delay time (L→L) | tPDLHB |  | 0.1 | 0.5 | µs | tr=tf=10ns | 8 |
| H-Bridge propagation delay time (H→H) | tPDHHB |  | 0.35 | 1 | µs | tr=tf=10ns | 8 |
| H-Bridge propagation delay time (HiZ→H) | tPDZHHB |  | 0.15 | 0.5 | µs | tr=tf=10ns | 8 |
| H-Bridge propagation delay time (H→HiZ) | tPDHZHB |  | 0.15 | 1 | µs | tr=tf=10ns | 8 |
| H-bridge output pulse width | tPWOHB | 0.6 | 0.9 |  | µs | PWL=1.0us, tr=tf=10ns | 8 |
| Input H level voltage (INA, INB, EN, PSAVE) | VIH | 0.7 |  |  | ×VIO | VIO=1.6V~5.5V | 8 |
| Input L level voltage (INA, INB, EN, PSAVE) | VIL |  |  | 0.3 | ×VIO |  | 8 |
| Input H level current (INA, INB, EN, PSAVE) | IIH |  |  | 1 | µA | VIO=1.6V~5.5V | 8 |
| Input L level current (INA, INB) | IIL | -1 |  |  | µA |  | 8 |
| Input terminal pullup resistor (EN, PSAVE) | RPU | 50 | 100 | 200 | kΩ |  | 8 |
| VIO input H level voltage | VIOH | 1.1 |  |  | V | VC=3.3V, VM=15V, INA="H", INB="L", EN="H", VIO: 0V => 1.1V | 8 |
| VIO input L level voltage | VIOL |  |  | 0.3 | V | VC=3.3V, VM=15V, INA="H", INB="L", EN="H", VIO: 3.3V => 0.3V | 8 |

## CAD (KiCad official)

- Symbol: `AP1013CEN`
- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`
- 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files: `ap1013cen-etched.step` / `ap1013cen-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ap1013cen.step` / `ap1013cen.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Asahi Kasei Microdevices datasheet](docs/ap1013cen-datasheet.pdf) (15 pp, sha256 `3dc5ab8c8d1e611e`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ap1013cen-datasheet.pdf)