component
AOZ1282CI-2
Public Made by Adomby adom
Alpha Omega Semicon DC-DC Converters, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AOZ1282CI-2
Alpha Omega Semicon · DC-DC Converters · SOT-23-6
AOZ1282CI-2 from Alpha Omega Semicon, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BST | input | Bootstrap voltage input for the high-side driver supply, with a 100nF capacitor connected between BST and LX. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | FB | input | Feedback input regulated to 0.8V; output voltage is set by a resistor divider between the output and GND. |
| 4 | EN | input | Active-high enable pin that must be connected to VIN through a current-limiting resistor and must not be left floating. |
| 5 | VIN | power_in | Supply voltage input with a range of 4.5V to 36V; the device starts up when VIN rises above the UVLO threshold. |
| 6 | LX | output | PWM output that connects to the inductor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Alpha Omega Semicon |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VIN) | VIN | 4.5 | 36 | V | 3 | ||
| Output Voltage (VOUT) | VOUT | 0.8 | V | 3 | |||
| Ambient Temperature (TA) | TA | -40 | 85 | °C | 3 | ||
| Supply Voltage (VIN) | VIN | 40 | V | 3 | |||
| EN to GND | -0.3 | 40 | V | 3 | |||
| FB to GND | -0.3 | 6 | V | 3 | |||
| LX to GND | -0.7 | V | 3 | ||||
| Junction Temperature (TJ) | TJ | 150 | °C | 3 | |||
| Storage Temperature (TS) | TS | -65 | 150 | °C | 3 | ||
| ESD Rating | 2 | kV | 3 | ||||
| Feedback Voltage | VFB | 784 | 800 | 816 | mV | TA = 25ºC | 3 |
| Frequency | fO | 800 | 1000 | 1200 | kHz | 3 | |
| Current Limit | ILIM | 0.75 | 0.95 | A | 3 | ||
| EN Input Threshold (Off threshold / On threshold) | VEN_OFF, VEN_ON | 0.704 | 0.8 | 0.896 | V | Off threshold / On threshold | 3 |
| Supply Current (Quiescent) | IIN | 1 | 1.5 | mA | IOUT = 0, VFB = 1V, VEN > 1.2V | 3 | |
| Input Under-Voltage Lockout Threshold (rising) | VUVLO | 2.9 | V | VIN rising | 3 | ||
| Input Under-Voltage Lockout Threshold (falling) | VUVLO | 2.3 | V | VIN falling | 3 | ||
| UVLO Hysteresis | 260 | mV | 3 | ||||
| Shutdown Supply Current | IOFF | 8 | µA | VEN = 0V | 3 | ||
| Load Regulation | VFB_LOAD | 0.5 | % | 120mA < Load < 1.08A | 3 | ||
| Line Regulation | VFB_LINE | 0.03 | %/V | Load = 600mA | 3 | ||
| Feedback Voltage Input Current | IFB | 500 | nA | VFB = 800mV | 3 | ||
| EN Input Hysteresis | VEN_HYS | 200 | mV | 3 | |||
| Enable Input Current | IEN | 3 | µA | 3 | |||
| Maximum Conversion Ratio | DMAX | 97 | % | 120mA | 3 | ||
| Minimum On Time | TON_MIN | 150 | ns | 3 | |||
| Over-Temperature Shutdown Limit (rising) | 150 | °C | TJ rising | 3 | |||
| Over-Temperature Shutdown Limit (falling) | 110 | °C | TJ falling | 3 | |||
| Soft Start Interval | TSS | 0.6 | ms | 3 | |||
| NMOS Leakage | ILEAKAGE | 10 | µA | VEN = 0V, VLX = 0V | 3 | ||
| NMOS On-Resistance | RDS(ON) | 420 | mΩ | VIN = 12V | 3 | ||
| Package Thermal Resistance (SOT23-6L) | θJA | 220 | °C/W | SOT23-6L | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 5. Keep sensitive signal traces away from the LX pin. 6. Pour a maximized copper area to the VIN pin, the | 10 |
CAD (KiCad official)
- Symbol:
AOZ1282CI-2 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
aoz1282ci-2-etched.step/aoz1282ci-2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);aoz1282ci-2.step/aoz1282ci-2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Alpha Omega Semicon datasheet (13 pp, sha256
d4c44e6f23e93e42, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AOZ1282CI-2
**Alpha Omega Semicon** · DC-DC Converters · SOT-23-6
AOZ1282CI-2 from Alpha Omega Semicon, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BST | input | Bootstrap voltage input for the high-side driver supply, with a 100nF capacitor connected between BST and LX. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | FB | input | Feedback input regulated to 0.8V; output voltage is set by a resistor divider between the output and GND. |
| 4 | EN | input | Active-high enable pin that must be connected to VIN through a current-limiting resistor and must not be left floating. |
| 5 | VIN | power_in | Supply voltage input with a range of 4.5V to 36V; the device starts up when VIN rises above the UVLO threshold. |
| 6 | LX | output | PWM output that connects to the inductor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Alpha Omega Semicon |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VIN) | VIN | 4.5 | | 36 | V | | 3 |
| Output Voltage (VOUT) | VOUT | 0.8 | | | V | | 3 |
| Ambient Temperature (TA) | TA | -40 | | 85 | °C | | 3 |
| Supply Voltage (VIN) | VIN | | | 40 | V | | 3 |
| EN to GND | | -0.3 | | 40 | V | | 3 |
| FB to GND | | -0.3 | | 6 | V | | 3 |
| LX to GND | | -0.7 | | | V | | 3 |
| Junction Temperature (TJ) | TJ | | | 150 | °C | | 3 |
| Storage Temperature (TS) | TS | -65 | | 150 | °C | | 3 |
| ESD Rating | | | | 2 | kV | | 3 |
| Feedback Voltage | VFB | 784 | 800 | 816 | mV | TA = 25ºC | 3 |
| Frequency | fO | 800 | 1000 | 1200 | kHz | | 3 |
| Current Limit | ILIM | 0.75 | | 0.95 | A | | 3 |
| EN Input Threshold (Off threshold / On threshold) | VEN_OFF, VEN_ON | 0.704 | 0.8 | 0.896 | V | Off threshold / On threshold | 3 |
| Supply Current (Quiescent) | IIN | | 1 | 1.5 | mA | IOUT = 0, VFB = 1V, VEN > 1.2V | 3 |
| Input Under-Voltage Lockout Threshold (rising) | VUVLO | | 2.9 | | V | VIN rising | 3 |
| Input Under-Voltage Lockout Threshold (falling) | VUVLO | | 2.3 | | V | VIN falling | 3 |
| UVLO Hysteresis | | | 260 | | mV | | 3 |
| Shutdown Supply Current | IOFF | | 8 | | µA | VEN = 0V | 3 |
| Load Regulation | VFB_LOAD | | 0.5 | | % | 120mA < Load < 1.08A | 3 |
| Line Regulation | VFB_LINE | | 0.03 | | %/V | Load = 600mA | 3 |
| Feedback Voltage Input Current | IFB | | 500 | | nA | VFB = 800mV | 3 |
| EN Input Hysteresis | VEN_HYS | | 200 | | mV | | 3 |
| Enable Input Current | IEN | | 3 | | µA | | 3 |
| Maximum Conversion Ratio | DMAX | | 97 | | % | 120mA | 3 |
| Minimum On Time | TON_MIN | | 150 | | ns | | 3 |
| Over-Temperature Shutdown Limit (rising) | | | 150 | | °C | TJ rising | 3 |
| Over-Temperature Shutdown Limit (falling) | | | 110 | | °C | TJ falling | 3 |
| Soft Start Interval | TSS | | 0.6 | | ms | | 3 |
| NMOS Leakage | ILEAKAGE | | 10 | | µA | VEN = 0V, VLX = 0V | 3 |
| NMOS On-Resistance | RDS(ON) | | 420 | | mΩ | VIN = 12V | 3 |
| Package Thermal Resistance (SOT23-6L) | θJA | | 220 | | °C/W | SOT23-6L | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | 5. Keep sensitive signal traces away from the LX pin. 6. Pour a maximized copper area to the VIN pin, the | 10 |
## CAD (KiCad official)
- Symbol: `AOZ1282CI-2`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `aoz1282ci-2-etched.step` / `aoz1282ci-2-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `aoz1282ci-2.step` / `aoz1282ci-2.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Alpha Omega Semicon datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586202905178857472) (13 pp, sha256 `d4c44e6f23e93e42`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/aoz1282ci-2-datasheet.pdf)