Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AOZ1282CI-1

Alpha Omega Semicon · DC-DC Converters · SOT-23-6

AOZ1282CI-1 from Alpha Omega Semicon, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BST passive Bootstrap voltage input. High side driver supply. Connect a 100nF capacitor between BST and LX to develop the gate drive rail for the internal high-side NMOS.
2 GND power_in Ground reference for the device and internal analog circuitry.
3 FB input Feedback input. Regulated to 0.8V (typ). Set the output voltage with a resistor divider from VOUT to FB to GND. Feedback input current is typ 500nA.
4 EN input Enable pin, active high. On-threshold 1.2V typ, off-threshold 0.4V max, 200mV hysteresis. Connect to VIN through a current-limiting resistor; do not leave floating. Absolute max 40V.
5 VIN power_in Supply voltage input, 4.5V to 36V operating (40V absolute max). Device starts up when VIN rises above the UVLO threshold (~2.9V rising, 2.3V falling).
6 LX power_out PWM switching output. Drain of the internal 420mΩ NMOS power switch. Connect to the external inductor and freewheeling Schottky diode. Delivers up to 600mA continuous output current at 1MHz.

Key specifications

Parameter Value
Manufacturer Alpha Omega Semicon
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

  • AOZ1282CI-1

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (VIN) VIN 40 V 3
LX to GND VLX -0.7 V 3
EN to GND VEN -0.3 40 V 3
FB to GND VFB -0.3 6 V 3
Junction Temperature (TJ) TJ 150 °C 3
Storage Temperature (TS) TS -65 150 °C 3
ESD Rating 2 kV Human body model, 1.5kΩ in series with 100pF 3
Supply Voltage (VIN) VIN 4.5 36 V 3
Output Voltage (VOUT) VOUT 0.8 V 3
Ambient Temperature (TA) TA -40 85 °C 3
Supply Voltage (VIN) VIN 4.5 36 V 3
Feedback Voltage VFB 784 800 816 mV TA = 25ºC 3
Frequency fO 800 1000 1200 kHz 3
Current Limit ILIM 0.75 0.95 A 3
Input Under-Voltage Lockout Threshold (VIN rising) VUVLO 2.9 V VIN rising 3
Input Under-Voltage Lockout Threshold (VIN falling) VUVLO 2.3 V VIN falling 3
UVLO Hysteresis 260 mV 3
Supply Current (Quiescent) IIN 1 1.5 mA IOUT = 0, VFB = 1V, VEN > 1.2V 3
Shutdown Supply Current IOFF 8 μA VEN = 0V 3
EN Input Threshold (off threshold) VEN_OFF 0.4 V 3
EN Input Threshold (on threshold) VEN_ON 1.2 V 3
EN Input Hysteresis VEN_HYS 200 mV 3
Enable Input Current IEN 3 μA 3
Load Regulation VFB_LOAD 0.5 % 120mA < Load < 1.08A 3
Line Regulation VFB_LINE 0.03 %/V Load = 600mA 3
Feedback Voltage Input Current IFB 500 nA VFB = 800mV 3
Maximum Duty Cycle DMAX 87 % 3
Minimum On Time TON_MIN 150 ns 3
Over-Temperature Shutdown Limit (TJ rising) 150 °C TJ rising 3
Over-Temperature Shutdown Limit (TJ falling) 110 °C TJ falling 3
Soft Start Interval TSS 0.6 ms 3
NMOS Leakage ILEAKAGE 10 μA VEN = 0V, VLX = 0V 3
NMOS On-Resistance RDS(ON) 420 mΩ VIN = 12V 3
Package Thermal Resistance (SOT23-6L) ΘJA 220 °C/W 3

CAD (KiCad official)

  • Symbol: AOZ1282CI-1
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: aoz1282ci-1-etched.step / aoz1282ci-1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); aoz1282ci-1.step / aoz1282ci-1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Alpha Omega Semicon datasheet (13 pp, sha256 6323f9bf7ab252ec, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF