component
AME8853-AEV120
Public Made by Adomby adom
AME Linear Voltage Regulators (LDO), SOT-25-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAME8853-AEV120
AME · Linear Voltage Regulators (LDO) · SOT-25-5
AME8853-AEV120 from AME, in a SOT-25-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage pin; should be decoupled with a 1µF or greater capacitor. |
| 2 | GND | power_in | Ground connection pin. |
| 3 | EN | input | Enable pin, active high; when pulled low the PMOS pass transistor turns off and current consumption is less than 1µA, and the pin is weakly pulled high when it floats. |
| 4 | NC | unconnected | No connection. |
| 5 | OUT | power_out | LDO voltage regulator output pin; should be decoupled with a 1.0µF or greater value low ESR ceramic capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AME |
| Package | SOT-25-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 2.5 | 5.5 | V | 7 | ||
| Output Accuracy | VOUT,ACC | -2 | 2 | % | 7 | ||
| Output Current | IOUT | 300 | mA | 7 | |||
| Quiescent Current | IQ | 60 | 90 | µA | IOUT=0mA | 7 | |
| Line Regulation | REGLINE | 0.125 | 0.25 | %/V | IOUT=1mA, 0.8V<=VOUT<=1.2V, 2.5V<=VIN<=3.5V | 7 | |
| Load Regulation | REGLOAD | 1.5 | 3 | %/A | 1mA<=IOUT<=300mA, 0.8V<=VOUT(NOM)<=1.2V | 7 | |
| Output Voltage Noise | eN | 100 | µVRMS | IOUT=10mA, VOUT=0.8V, f=1Hz to 100KHz | 8 | ||
| Power Supply Rejection Ratio at 100Hz | PSRR | 60 | dB | F=100Hz | 8 | ||
| Power Supply Rejection Ratio at 1KHz | PSRR | 60 | dB | F=1KHz | 8 | ||
| Power Supply Rejection Ratio at 10KHz | PSRR | 60 | dB | F=10KHz | 8 | ||
| Enable High Voltage | VEN,HI | 1.4 | V | Enable High (enabled) | 8 | ||
| Enable Low Voltage | VEN,LO | 0 | 0.4 | V | Enable Low (shutdown) | 8 | |
| Shutdown Current | ISHDN | 0.1 | 1 | µA | 8 | ||
| Output Current Limit | ILIM | 400 | mA | 8 | |||
| Thermal Shutdown Temperature | TSHDN | 150 | oC | Shutdown, temperature increasing | 8 | ||
| Thermal Shutdown Hysteresis | TSHDN(HYS) | 20 | oC | 8 | |||
| Input Voltage | VIN | -0.3 | 6 | V | 5 | ||
| EN Voltage | VEN | -0.3 | 6 | V | 5 | ||
| ESD HBM | 2 | kV | HBM | 5 | |||
| ESD MM | 200 | V | MM | 5 | |||
| Storage Temperature Range | TSTG | -65 | 150 | oC | 5 | ||
| Ambient Temperature Range | TA | -40 | 85 | oC | 5 | ||
| Junction Temperature Range | TJ | -40 | 125 | oC | 5 | ||
| Thermal Resistance Junction to Ambient (SOT-25, conductive epoxy) | θJA | 260 | oC / W | Conductive Epoxy | 6 | ||
| Thermal Resistance Junction to Case (SOT-25) | θJC | 81 | oC / W | Conductive Epoxy | 6 | ||
| Internal Power Dissipation (SOT-25) | PD | 400 | mW | Conductive Epoxy | 6 | ||
| Maximum Junction Temperature | 150 | oC | 6 | ||||
| Lead Temperature (Soldering, 10 Sec.) | 260 | oC | 10 Sec. | 6 |
CAD (KiCad official)
- Symbol:
AME8853-AEV120 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25-5 (KiCad packages3D, STEP)
- 3D model files:
ame8853-aev120-etched.step/ame8853-aev120-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ame8853-aev120.step/ame8853-aev120.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AME datasheet (26 pp, sha256
a285c8bee7d78dfa, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).