component
AM01B
Public Made by Adomby adom
Sam wing Touch Sensors, SOT-23-6L. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left)
2 files changed
+207−1
package.json+2−1@@ -24,6 +24,7 @@ "docs/hero.png", "docs/am01b-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ] }
pads.jsonadded+205@@ -0,0 +1,205 @@+{+ "schema": "adom.pads/1",+ "slug": "am01b",+ "footprint": "SOT-23-6",+ "generated_from": {+ "footprint": "SOT-23-6@sha256:f341c73aac9dcb55",+ "pins": "page.json:component.pins",+ "overrides": null+ },+ "pin1": {+ "pad": "1",+ "at": [+ -1.1375,+ -0.95+ ],+ "corner": "top-left",+ "source": "silk-marker",+ "derived_from": "SOT-23-6@sha256:f341c73aac9dcb55"+ },+ "pad_count": 6,+ "paste_apertures": 0,+ "issues": [],+ "pads": [+ {+ "pad": "1",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -1.1375,+ -0.95+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "1",+ "name": "OUT",+ "type": "output",+ "description": "Touch key sense output. Push-pull digital output driving up to 20 mA sink current (Vol = 0.3 x VDD). Polarity (active-high/low) is set by VGM; mode (hold/sync/toggle) is set by HMD.",+ "is_pin1": true,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "2",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -1.1375,+ 0.0+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground / negative supply reference. 0 V rail.",+ "is_pin1": false,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "3",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -1.1375,+ 0.95+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "3",+ "name": "KEY",+ "type": "input",+ "description": "Capacitive touch sense input. Connects to the sense pad through a series resistor R1 (~1 kOhm typical, 0-5 kOhm recommended). An optional CSEL capacitor to GND (0-50 pF) adjusts sensitivity; minimum detectable delta capacitance is 0.2 pF.",+ "is_pin1": false,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "4",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 1.1375,+ 0.95+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "4",+ "name": "VGM",+ "type": "input",+ "description": "Output-polarity select. Tie high: OUT is active-low (idle high, low when touched). Tie low or leave floating: OUT is active-high (idle low, high when touched). Default state = 0 (active-high).",+ "is_pin1": false,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "5",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 1.1375,+ 0.0+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "5",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply input, 2.3 V to 5.5 V (3 V typical). Recommend a 100 nF (104) decoupling capacitor placed as close to VDD as possible. Absolute max -0.3 V to +5.5 V.",+ "is_pin1": false,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "6",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 1.1375,+ -0.95+ ],+ "rot": 0.0,+ "size": [+ 1.325,+ 0.6+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "6",+ "name": "HMD",+ "type": "input",+ "description": "Output-mode select. Tie high: OUT is in hold (toggle/self-lock) mode - each touch flips the output. Tie low: OUT is in sync (direct) mode - output follows the touch. Default state = 0 (sync mode).",+ "is_pin1": false,+ "source": {+ "geometry": "SOT-23-6.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ }+ ]+}