component

AM01B

Public Made by Adom

by adom

Sam wing Touch Sensors, SOT-23-6L. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentsensoram01b
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

AM01B

Sam wing · Touch Sensors · SOT-23-6L

AM01B from Sam wing, in a SOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Touch key sense output. Push-pull digital output driving up to 20 mA sink current (Vol = 0.3 x VDD). Polarity (active-high/low) is set by VGM; mode (hold/sync/toggle) is set by HMD.
2 GND power_in Ground / negative supply reference. 0 V rail.
3 KEY input Capacitive touch sense input. Connects to the sense pad through a series resistor R1 (~1 kOhm typical, 0-5 kOhm recommended). An optional CSEL capacitor to GND (0-50 pF) adjusts sensitivity; minimum detectable delta capacitance is 0.2 pF.
4 VGM input Output-polarity select. Tie high: OUT is active-low (idle high, low when touched). Tie low or leave floating: OUT is active-high (idle low, high when touched). Default state = 0 (active-high).
5 VDD power_in Positive supply input, 2.3 V to 5.5 V (3 V typical). Recommend a 100 nF (104) decoupling capacitor placed as close to VDD as possible. Absolute max -0.3 V to +5.5 V.
6 HMD input Output-mode select. Tie high: OUT is in hold (toggle/self-lock) mode - each touch flips the output. Tie low: OUT is in sync (direct) mode - output follows the touch. Default state = 0 (sync mode).

Key specifications

Parameter Value
Manufacturer Sam wing
Package SOT-23-6L
Category Sensor
Pins 6

Ordering variants

  • AM01B
  • AM01B_L

CAD (KiCad official)

  • Symbol: AM01B
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6L (KiCad packages3D, STEP)
  • 3D model files: am01b-etched.step / am01b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); am01b.step / am01b.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
am01b.step 97 KB You want the bare part, or you mark your own boards.
am01b-etched.step 1.1 MB You want the part with AM01B already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 292 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Sam wing datasheet (6 pp, sha256 b6d42aa931be386f, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF