AM01B

@@ -0,0 +1,46 @@+# AM01B++**Sam wing** · Touch Sensors · SOT-23-6L++AM01B from Sam wing, in a SOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | OUT | output | Touch key sense output. Push-pull digital output driving up to 20 mA sink current (Vol = 0.3 x VDD). Polarity (active-high/low) is set by VGM; mode (hold/sync/toggle) is set by HMD. |+| 2 | GND | power_in | Ground / negative supply reference. 0 V rail. |+| 3 | KEY | input | Capacitive touch sense input. Connects to the sense pad through a series resistor R1 (~1 kOhm typical, 0-5 kOhm recommended). An optional CSEL capacitor to GND (0-50 pF) adjusts sensitivity; minimum detectable delta capacitance is 0.2 pF. |+| 4 | VGM | input | Output-polarity select. Tie high: OUT is active-low (idle high, low when touched). Tie low or leave floating: OUT is active-high (idle low, high when touched). Default state = 0 (active-high). |+| 5 | VDD | power_in | Positive supply input, 2.3 V to 5.5 V (3 V typical). Recommend a 100 nF (104) decoupling capacitor placed as close to VDD as possible. Absolute max -0.3 V to +5.5 V. |+| 6 | HMD | input | Output-mode select. Tie high: OUT is in hold (toggle/self-lock) mode - each touch flips the output. Tie low: OUT is in sync (direct) mode - output follows the touch. Default state = 0 (sync mode). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Sam wing |+| Package | SOT-23-6L |+| Category | Sensor |+| Pins | 6 |++## Ordering variants++- `AM01B`+- `AM01B_L`++## CAD (KiCad official)++- Symbol: `AM01B`+- Footprint: `Package_TO_SOT_SMD:SOT-23-6`+- 3D model: SOT-23-6L (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Sam wing datasheet](docs/am01b-datasheet.pdf) (6 pp, sha256 `b6d42aa931be386f`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/am01b-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "am01b",+  "version": "0.1.0",+  "type": "component",+  "description": "Sam wing Touch Sensors, SOT-23-6L. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensor",+    "am01b"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "am01b.kicad_sym",+    "am01b.kicad_mod",+    "am01b.glb",+    "am01b.step",+    "am01b.lbr",+    "docs/hero.png",+    "docs/am01b-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file