component

AL8807QMP-13

Public Made by Adom

by adom

Diodes Incorporated LED Drivers, MSOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentled-drval8807qmp-13
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs al8807qmp-13: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 2mo ago
al8807qmp-13-etched.fit.json al8807qmp-13: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
al8807qmp-13-etched.glb al8807qmp-13: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
al8807qmp-13-etched.step al8807qmp-13: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
al8807qmp-13.glb fix footprint: MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm -> MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm (3d refresh; body regen… · Ray 2mo ago
al8807qmp-13.kicad_mod fix footprint: MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm -> MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm (ep_dropped, 8 pins; data… · Ray 2mo ago
al8807qmp-13.kicad_sym add symbol pin "9" for the exposed thermal pad: the footprint carries the pad and the symbol had none, so it reached no… · Ray 2mo ago
al8807qmp-13.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray 2mo ago
al8807qmp-13.step fix footprint: MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm -> MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm (3d refresh; body regen… · Ray 2mo ago
package.json Publish 0.2.0 · Ray 2mo ago
pads.json add symbol pin "9" for the exposed thermal pad: the footprint carries the pad and the symbol had none, so it reached no… · Ray 2mo ago
page.json al8807qmp-13: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray 1mo ago
README.md al8807qmp-13: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 1mo ago

AL8807QMP-13

Diodes Incorporated · LED Drivers · MSOP-8-EP

AL8807QMP-13 from Diodes Incorporated, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SET input Set Nominal Output Current pin. An external resistor (RS) from VIN to SET programs the nominal LED current as I_OUTnom = 0.1 / RS (V_TH ≈ 100 mV, ISET typ 16 µA).
2 GND power_in Ground pin. Dominant heat conduction path from the die is through this pin; use a large ground plane with thermal vias.
3 GND power_in Ground pin. Tie together with pin 2 to the system ground plane.
4 CTRL input Dimming and On/Off Control input. Leave floating (internal ~50 kΩ to V_REF = 2.5V) for 100% output. Drive <0.4V to shut off the output MOSFET; 0.5V-2.5V DC scales output current from 20% to 100%; a PWM signal (low ≤0.4V, high ≥2.6V, transitions <1 µs) provides PWM dimming below the SET-programmed level. Absolute max 6V.
5 SW output Switch pin - drain of the internal power MOSFET. Connect the inductor and freewheeling Schottky diode here; keep track length short to reduce EMI. R_DS(on) typ 0.25 Ω, absolute max V_SW = 40V.
6 SW output Switch pin - tied internally to pin 5; parallel both to share switch current up to 1.3A (2.5A peak).
7 N/C unconnected No internal connection. Leave floating or tie to GND.
8 VIN power_in Input supply pin, 6V to 30V (absolute max 40V). Must be locally decoupled to GND with ≥2.2 µF X7R ceramic capacitor placed close to the pin.
EP EP passive Exposed pad / thermal tab on the bottom of the MSOP-8EP package. Solder to the GND copper pour and thermal mass to lower θJA (typ 69 °C/W). Not a primary electrical ground conduction path.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package MSOP-8-EP
Category LED-drv
Pins 9

Ordering variants

  • AL8807QMP-13

CAD (KiCad official)

  • Symbol: AL8807QMP-13
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: al8807qmp-13-etched.step / al8807qmp-13-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); al8807qmp-13.step / al8807qmp-13.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
al8807qmp-13.step 194 KB You want the bare part, or you mark your own boards.
al8807qmp-13-etched.step 2.1 MB You want the part with AL8807QMP-13 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 522 faces against 63 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (16 pp, sha256 42a3fe73803ed5b4, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF