component
AL8807QMP-13
Public Made by Adomby adom
Diodes Incorporated LED Drivers, MSOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "SET", "type": "input",- "description": "Set Nominal Output Current pin. An external resistor (RS) from VIN to SET programs the nominal LED current as I_OUTnom = 0.1 / RS (V_TH \u2248 100 mV, ISET typ 16 \u00b5A)."+ "description": "Set Nominal Output Current pin. An external resistor (RS) from VIN to SET programs the nominal LED current as I_OUTnom = 0.1 / RS (V_TH ≈ 100 mV, ISET typ 16 µA)." }, { "number": "2",@@ -50,13 +50,13 @@ "number": "4", "name": "CTRL", "type": "input",- "description": "Dimming and On/Off Control input. Leave floating (internal ~50 k\u03a9 to V_REF = 2.5V) for 100% output. Drive <0.4V to shut off the output MOSFET; 0.5V-2.5V DC scales output current from 20% to 100%; a PWM signal (low \u22640.4V, high \u22652.6V, transitions <1 \u00b5s) provides PWM dimming below the SET-programmed level. Absolute max 6V."+ "description": "Dimming and On/Off Control input. Leave floating (internal ~50 kΩ to V_REF = 2.5V) for 100% output. Drive <0.4V to shut off the output MOSFET; 0.5V-2.5V DC scales output current from 20% to 100%; a PWM signal (low ≤0.4V, high ≥2.6V, transitions <1 µs) provides PWM dimming below the SET-programmed level. Absolute max 6V." }, { "number": "5", "name": "SW", "type": "output",- "description": "Switch pin - drain of the internal power MOSFET. Connect the inductor and freewheeling Schottky diode here; keep track length short to reduce EMI. R_DS(on) typ 0.25 \u03a9, absolute max V_SW = 40V."+ "description": "Switch pin - drain of the internal power MOSFET. Connect the inductor and freewheeling Schottky diode here; keep track length short to reduce EMI. R_DS(on) typ 0.25 Ω, absolute max V_SW = 40V." }, { "number": "6",@@ -74,13 +74,13 @@ "number": "8", "name": "VIN", "type": "power_in",- "description": "Input supply pin, 6V to 30V (absolute max 40V). Must be locally decoupled to GND with \u22652.2 \u00b5F X7R ceramic capacitor placed close to the pin."+ "description": "Input supply pin, 6V to 30V (absolute max 40V). Must be locally decoupled to GND with ≥2.2 µF X7R ceramic capacitor placed close to the pin." }, { "number": "EP", "name": "EP", "type": "passive",- "description": "Exposed pad / thermal tab on the bottom of the MSOP-8EP package. Solder to the GND copper pour and thermal mass to lower \u03b8JA (typ 69 \u00b0C/W). Not a primary electrical ground conduction path."+ "description": "Exposed pad / thermal tab on the bottom of the MSOP-8EP package. Solder to the GND copper pour and thermal mass to lower θJA (typ 69 °C/W). Not a primary electrical ground conduction path." } ], "provenance": {@@ -144,5 +144,8 @@ "docs/al8807qmp-13-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }