component
AL8807QMP-13
Public Made by Adomby adom
Diodes Incorporated LED Drivers, MSOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.md+14@@ -37,6 +37,20 @@ AL8807QMP-13 from Diodes Incorporated, in a MSOP-8-EP. Pinout and pin descriptio - Footprint: `Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm` - 3D model: MSOP-8-EP (KiCad packages3D, STEP) +## 3D model downloads++Two STEP files. Same geometry, different body top:++| File | Size | Use it when |+|---|---|---|+| [`al8807qmp-13.step`](al8807qmp-13.step) | 194 KB | You want the bare part, or you mark your own boards. |+| [`al8807qmp-13-etched.step`](al8807qmp-13-etched.step) | 2.1 MB | You want the part with `AL8807QMP-13` already on it. |++The marking in the etched file is real recessed geometry cut into the solid, not a+texture or a decal: 522 faces against 63 in the bare model. It+survives export, section views, and rendering in any CAD tool, and it drops straight+into KiCad or Fusion with no extra setup.+ ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing:
package.json+1−1@@ -1,6 +1,6 @@ { "slug": "al8807qmp-13",- "version": "0.1.0",+ "version": "0.2.0", "type": "component", "description": "Diodes Incorporated LED Drivers, MSOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [
page.json+11−8@@ -4,7 +4,7 @@ "slug": "al8807qmp-13", "title": "AL8807QMP-13", "brief": "Diodes Incorporated LED Drivers, MSOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.2.0", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -34,7 +34,7 @@ "number": "1", "name": "SET", "type": "input",- "description": "Set Nominal Output Current pin. An external resistor (RS) from VIN to SET programs the nominal LED current as I_OUTnom = 0.1 / RS (V_TH \u2248 100 mV, ISET typ 16 \u00b5A)."+ "description": "Set Nominal Output Current pin. An external resistor (RS) from VIN to SET programs the nominal LED current as I_OUTnom = 0.1 / RS (V_TH ≈ 100 mV, ISET typ 16 µA)." }, { "number": "2",@@ -52,13 +52,13 @@ "number": "4", "name": "CTRL", "type": "input",- "description": "Dimming and On/Off Control input. Leave floating (internal ~50 k\u03a9 to V_REF = 2.5V) for 100% output. Drive <0.4V to shut off the output MOSFET; 0.5V-2.5V DC scales output current from 20% to 100%; a PWM signal (low \u22640.4V, high \u22652.6V, transitions <1 \u00b5s) provides PWM dimming below the SET-programmed level. Absolute max 6V."+ "description": "Dimming and On/Off Control input. Leave floating (internal ~50 kΩ to V_REF = 2.5V) for 100% output. Drive <0.4V to shut off the output MOSFET; 0.5V-2.5V DC scales output current from 20% to 100%; a PWM signal (low ≤0.4V, high ≥2.6V, transitions <1 µs) provides PWM dimming below the SET-programmed level. Absolute max 6V." }, { "number": "5", "name": "SW", "type": "output",- "description": "Switch pin - drain of the internal power MOSFET. Connect the inductor and freewheeling Schottky diode here; keep track length short to reduce EMI. R_DS(on) typ 0.25 \u03a9, absolute max V_SW = 40V."+ "description": "Switch pin - drain of the internal power MOSFET. Connect the inductor and freewheeling Schottky diode here; keep track length short to reduce EMI. R_DS(on) typ 0.25 Ω, absolute max V_SW = 40V." }, { "number": "6",@@ -76,13 +76,13 @@ "number": "8", "name": "VIN", "type": "power_in",- "description": "Input supply pin, 6V to 30V (absolute max 40V). Must be locally decoupled to GND with \u22652.2 \u00b5F X7R ceramic capacitor placed close to the pin."+ "description": "Input supply pin, 6V to 30V (absolute max 40V). Must be locally decoupled to GND with ≥2.2 µF X7R ceramic capacitor placed close to the pin." }, { "number": "9", "name": "EP", "type": "passive",- "description": "Exposed pad / thermal tab on the bottom of the MSOP-8EP package. Solder to the GND copper pour and thermal mass to lower \u03b8JA (typ 69 \u00b0C/W). Not a primary electrical ground conduction path.",+ "description": "Exposed pad / thermal tab on the bottom of the MSOP-8EP package. Solder to the GND copper pour and thermal mass to lower θJA (typ 69 °C/W). Not a primary electrical ground conduction path.", "source": "renumbered-to-footprint-pad" } ],@@ -157,6 +157,9 @@ "docs/hero.png", "docs/al8807qmp-13-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]+ "viewers/footprint.html",+ "pads.json"+ ],+ "description": "Diodes Incorporated LED Drivers, MSOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "visibility": "public" }