component
AL8807QMP-13
Public Made by Adomby adom
Diodes Incorporated LED Drivers, MSOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left)
2 files changed
+293−1
package.json+2−1@@ -24,6 +24,7 @@ "docs/hero.png", "docs/al8807qmp-13-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ] }
pads.jsonadded+291@@ -0,0 +1,291 @@+{+ "schema": "adom.pads/1",+ "slug": "al8807qmp-13",+ "footprint": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm",+ "generated_from": {+ "footprint": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm@sha256:69da285f4cb2b46b",+ "pins": "page.json:component.pins",+ "overrides": null+ },+ "pin1": {+ "pad": "1",+ "at": [+ -2.15,+ -0.975+ ],+ "corner": "top-left",+ "source": "silk-marker",+ "derived_from": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm@sha256:69da285f4cb2b46b"+ },+ "pad_count": 9,+ "paste_apertures": 4,+ "issues": [],+ "pads": [+ {+ "pad": "1",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.15,+ -0.975+ ],+ "rot": 0.0,+ "size": [+ 1.45,+ 0.4+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "1",+ "name": "SET",+ "type": "input",+ "description": "Set Nominal Output Current pin. An external resistor (RS) from VIN to SET programs the nominal LED current as I_OUTnom = 0.1 / RS (V_TH ≈ 100 mV, ISET typ 16 µA).",+ "is_pin1": true,+ "source": {+ "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "2",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.15,+ -0.325+ ],+ "rot": 0.0,+ "size": [+ 1.45,+ 0.4+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin. Dominant heat conduction path from the die is through this pin; use a large ground plane with thermal vias.",+ "is_pin1": false,+ "source": {+ "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "3",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.15,+ 0.325+ ],+ "rot": 0.0,+ "size": [+ 1.45,+ 0.4+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin. Tie together with pin 2 to the system ground plane.",+ "is_pin1": false,+ "source": {+ "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "4",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ -2.15,+ 0.975+ ],+ "rot": 0.0,+ "size": [+ 1.45,+ 0.4+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "4",+ "name": "CTRL",+ "type": "input",+ "description": "Dimming and On/Off Control input. Leave floating (internal ~50 kΩ to V_REF = 2.5V) for 100% output. Drive <0.4V to shut off the output MOSFET; 0.5V-2.5V DC scales output current from 20% to 100%; a PWM signal (low ≤0.4V, high ≥2.6V, transitions <1 µs) provides PWM dimming below the SET-programmed level. Absolute max 6V.",+ "is_pin1": false,+ "source": {+ "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "5",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.15,+ 0.975+ ],+ "rot": 0.0,+ "size": [+ 1.45,+ 0.4+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "5",+ "name": "SW",+ "type": "output",+ "description": "Switch pin - drain of the internal power MOSFET. Connect the inductor and freewheeling Schottky diode here; keep track length short to reduce EMI. R_DS(on) typ 0.25 Ω, absolute max V_SW = 40V.",+ "is_pin1": false,+ "source": {+ "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "6",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.15,+ 0.325+ ],+ "rot": 0.0,+ "size": [+ 1.45,+ 0.4+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "6",+ "name": "SW",+ "type": "output",+ "description": "Switch pin - tied internally to pin 5; parallel both to share switch current up to 1.3A (2.5A peak).",+ "is_pin1": false,+ "source": {+ "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "7",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.15,+ -0.325+ ],+ "rot": 0.0,+ "size": [+ 1.45,+ 0.4+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "7",+ "name": "N/C",+ "type": "unconnected",+ "description": "No internal connection. Leave floating or tie to GND.",+ "is_pin1": false,+ "source": {+ "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "8",+ "kind": "smd",+ "shape": "roundrect",+ "at": [+ 2.15,+ -0.975+ ],+ "rot": 0.0,+ "size": [+ 1.45,+ 0.4+ ],+ "layers": [+ "F.Cu",+ "F.Mask",+ "F.Paste"+ ],+ "thermal": false,+ "pin": "8",+ "name": "VIN",+ "type": "power_in",+ "description": "Input supply pin, 6V to 30V (absolute max 40V). Must be locally decoupled to GND with ≥2.2 µF X7R ceramic capacitor placed close to the pin.",+ "is_pin1": false,+ "source": {+ "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm.kicad_mod",+ "meaning": "page.json:component.pins",+ "correspondence": "kicad: symbol pin number == pad name"+ }+ },+ {+ "pad": "9",+ "kind": "smd",+ "shape": "rect",+ "at": [+ 0.0,+ 0.0+ ],+ "rot": 0.0,+ "size": [+ 1.68,+ 1.88+ ],+ "layers": [],+ "thermal": true,+ "pin": "EP",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad / thermal tab on the bottom of the MSOP-8EP package. Solder to the GND copper pour and thermal mass to lower θJA (typ 69 °C/W). Not a primary electrical ground conduction path.",+ "is_pin1": false,+ "source": {+ "geometry": "MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm.kicad_mod",+ "meaning": null,+ "correspondence": "derived: sole unmatched pin \"EP\" to sole thermal pad \"9\""+ }+ }+ ]+}