Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AL8400SE-7

Diodes Incorporated · LED Drivers · SOT-353

AL8400SE-7 from Diodes Incorporated, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 E1 passive Emitter connection, which must be connected to GND (VE1 limited to -0.3 to +0.3 V relative to GND).
2 GND power_in Analog ground return for the reference and amplifier, to be connected to E1.
3 VCC power_in Supply input (2.2 V to 18 V recommended, 20 V absolute maximum) with a 0.47 µF ceramic capacitor connected close to the device from VCC to GND.
4 FB input Feedback input that regulates to 200 mV nominal (20 V absolute maximum relative to GND).
5 OUT output Open-collector output (0.2 V to 18 V, 0.3 mA to 15 mA) requiring a capacitor close to the device between OUT and GND.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package SOT-353
Category Nixie Tube Driver/LED Driver
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback Voltage VFB 0.194 0.2 0.206 V TA = +25°C 3
Feedback Voltage VFB 0.19 0.21 V TA = -40°C to +125°C 3
Feedback Pin Load Regulation FBLOAD 3.1 6 mV IOUT = 1 to 15mA, TA = +25°C 3
Feedback Pin Load Regulation FBLOAD 10 mV IOUT = 1 to 15mA, TA = -40°C to +125°C 3
Feedback Pin Line Regulation FBLINE 0.1 1.5 mV VCC = 2.2V to 18V, TA = +25°C 3
Feedback Pin Line Regulation FBLINE 2 mV VCC = 2.2V to 18V, TA = -40°C to +125°C 3
FB Input Bias Current IFB -200 0 nA VCC = 18V, TA = -40°C to +125°C 3
Supply Current ICC 0.48 1 mA VCC = 2.2V to 18V, IOUT = 10mA, TA = +25°C 3
Supply Current ICC 1.5 mA VCC = 2.2V to 18V, IOUT = 10mA, TA = -40°C to +125°C 3
OUT Leakage Current IOUT(LK) 0.1 µA VCC = 18V, VOUT = 18V, VFB = 0V, TA = +25°C 3
OUT Leakage Current IOUT(LK) 1 µA VCC = 18V, VOUT = 18V, VFB = 0V, TA = +125°C 3
Dynamic Output Impedance ZOUT 0.25 0.4 Ω IOUT = 1 to 15mA, f < 1kHz, TA = +25°C 3
Dynamic Output Impedance ZOUT 0.6 Ω IOUT = 1 to 15mA, f < 1kHz, TA = -40°C to +125°C 3
Supply Voltage Range VCC 2.2 18 V 3
OUT Voltage Range VOUT 0.2 18 V 3
OUT Pin Current IOUT 0.3 15 mA 3
Operating Ambient Temperature Range TA -40 125 °C 3
Supply Voltage Relative to GND VCC 20 V TA = +25°C 2
OUT Voltage Relative to GND VOUT 20 V TA = +25°C 2
FB Voltage Relative to GND VFB 20 V TA = +25°C 2
E1 Voltage Relative to GND VE1 -0.3 0.3 V TA = +25°C 2
Operating Junction Temperature TJ -40 150 °C TA = +25°C 2
Storage Temperature TST -55 150 °C TA = +25°C 2
Thermal Resistance Junction to Ambient θJA 400 °C/W SOT353 2
Power Dissipation PDIS 310 mW TA = +25°C, TJ = +150°C, SOT353 2
FB Input Bias Current IFB -45 nA VCC = 18V, TA = +25°C 3
Output Voltage Regulation FBOVR 2 mV VOUT = 0.2V to 18V, IOUT = 1mA, TA = +25°C 3
Output Voltage Regulation FBOVR 3 mV VOUT = 0.2V to 18V, IOUT = 1mA, TA = -40°C to +125°C 3
Power Supply Rejection Ratio PSRR 45 dB f = 300kHz, VAC = 0.3VPP, TA = +25°C 3
Amplifier Unity Gain Frequency BW 600 kHz TA = +25°C 3
Amplifier Transconductance G 4500 mA/V TA = +25°C 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: AL8400SE-7
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SOT-353, generated on the KiCad land (body 1.25 x 2.1 mm, terminals on the pads, 0.95 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: al8400se-7-etched.step / al8400se-7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); al8400se-7.step / al8400se-7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (13 pp, sha256 6e1e726d60c4d5a2, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF