component
AiP8002SA8.TR
Public Made by Adomby adom
Wuxi I-core Elec Audio Power OpAmps, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAiP8002SA8.TR
Wuxi I-core Elec · Audio Power OpAmps · SOP-8
AiP8002SA8.TR from Wuxi I-core Elec, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHUTDOWN | input | Shutdown control input, active high: a high level puts the amplifier into shutdown mode. |
| 2 | BYPASS | output | Internal bias voltage node that is filtered by an external bypass capacitor CB. |
| 3 | +IN | input | Non-inverting (positive) amplifier input. |
| 4 | -IN | input | Inverting (negative) amplifier input, which sets the closed-loop gain together with Rf and Ri. |
| 5 | VO1 | output | Negative analog output terminal of the bridge-tied load driver. |
| 6 | VDD | power_in | Power supply input, 2.0 V to 5.5 V recommended operating range. |
| 7 | GND | power_in | Ground reference for the device. |
| 8 | VO2 | output | Positive analog output terminal of the bridge-tied load driver. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Wuxi I-core Elec |
| Package | SOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | VDD | 6 | V | 5 | |||
| Input voltage | VIN | -0.3 | V | upper bound VDD+0.3 | 5 | ||
| Operating temperature | Tamb | -40 | 85 | ℃ | 5 | ||
| Junction temperature | TJ | 150 | ℃ | 5 | |||
| Soldering temperature | TL | 260 | ℃ | SOP/MSOP/ESOP, 10 s | 5 | ||
| Operating voltage (recommended) | VDD | 2 | 5.5 | V | 5 | ||
| Operating temperature (recommended) | Tamb | -40 | 85 | ℃ | 5 | ||
| Supply voltage | VDD | 2 | 5.5 | V | 6 | ||
| Quiescent current | IDD | 8 | 12 | mA | VIN=0V, IO=0A | 6 | |
| Shutdown mode current | ISD | 0.5 | 2 | μA | VPIN1=VDD | 6 | |
| Output offset voltage | VOS | 5 | 50 | mV | VIN=0V | 6 | |
| Output power | PO | 1.5 | W | THD=1%, f=1KHz, RL=4Ω | 6 | ||
| Output power | PO | 2 | W | THD+N=10%, f=1KHz, RL=4Ω | 6 | ||
| Noise plus total harmonic distortion | THD+N | 0.2 | % | 20Hz≤f≤20KHz, AVD=2, RL=8Ω, PO=1W | 6 | ||
| Noise plus total harmonic distortion | THD+N | 0.4 | % | 20Hz≤f≤20KHz, AVD=2, RL=4Ω, PO=1.6W | 6 | ||
| Power supply rejection ratio | PSRR | 60 | dB | VDD=4.9V～5.1V | 6 |
CAD (KiCad official)
- Symbol:
AiP8002SA8.TR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
aip8002sa8-tr-etched.step/aip8002sa8-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);aip8002sa8-tr.step/aip8002sa8-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Wuxi I-core Elec datasheet (12 pp, sha256
1df738c622fea83a, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).