component
AIP74LVC1G126GC353.TR
Public Made by Adomby adom
Wuxi I core Elec Buffers, Drivers, Receivers, Transceivers, SOT-353. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAIP74LVC1G126GC353.TR
Wuxi I core Elec · Buffers, Drivers, Receivers, Transceivers · SOT-353
AIP74LVC1G126GC353.TR from Wuxi I core Elec, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input; driving it low places output Y in the high-impedance (Z) state, and it accepts 3.3V or 5V drive per the device overview. |
| 2 | A | input | Data input; it can be driven from 3.3V or 5V logic and tolerates input voltages up to 5V, with VI rated 0 to 5.5V under recommended conditions. |
| 3 | GND | power_in | Ground reference at 0V. |
| 4 | Y | tri_state | Three-state data output that is high impedance when OE is low, with ±24 mA output drive at VCC = 3.0V. |
| 5 | VCC | power_in | Supply voltage, specified from 1.65V to 5.5V under recommended operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Wuxi I core Elec |
| Package | SOT-353 |
| Category | Logic |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 (Supply voltage) | VCC | -0.5 | 6.5 | V | 4 | ||
| 输入电压 (Input voltage) | VI | -0.5 | 6.5 | V | 4 | ||
| 输出电压 (Output voltage), operating mode | VO | -0.5 | V | 工作模式 | 4 | ||
| 输出电压 (Output voltage), power-down mode | VO | -0.5 | 6.5 | V | 掉电模式 | 4 | |
| 输入钳位电流 (Input clamp current) | IIK | -50 | mA | VI<0V | 4 | ||
| 输出钳位电流 (Output clamp current) | IOK | -50 | 50 | mA | VO>VCC 或 VO<0V | 4 | |
| 输出电流 (Output current) | IO | -50 | 50 | mA | VO=0V～VCC | 4 | |
| 电源电流 (Supply current) | ICC | 100 | mA | 4 | |||
| 地电流 (Ground current) | IGND | -100 | mA | 4 | |||
| 贮存温度 (Storage temperature) | Tstg | -65 | 150 | ℃ | 4 | ||
| 总功耗 (Total power dissipation) | Ptot | 250 | mW | 4 | |||
| 焊接温度 (Soldering temperature) | TL | 250 | ℃ | 10 秒 | 4 | ||
| 电源电压 (Supply voltage) | VCC | 1.65 | 5.5 | V | 4 | ||
| 输入电压 (Input voltage) | VI | 0 | 5.5 | V | 4 | ||
| 输出电压 (Output voltage), operating mode | VO | 0 | V | 工作模式 | 4 | ||
| 输出电压 (Output voltage), power-down mode | VO | 0 | 5.5 | V | 掉电模式；VCC=0V | 4 | |
| 环境温度 (Ambient temperature) | Tamb | -40 | 105 | ℃ | 4 | ||
| 输入上升和下降转换速率 (Input rise and fall rate) | ∆t/∆V | 20 | ns/V | VCC=1.65V～2.7V | 4 | ||
| 输入上升和下降转换速率 (Input rise and fall rate) | ∆t/∆V | 10 | ns/V | VCC=2.7V～5.5V | 4 | ||
| 输入高电平电压 (HIGH-level input voltage) | VIH | 1.7 | V | VCC=2.3V～2.7V | 6 | ||
| 输入高电平电压 (HIGH-level input voltage) | VIH | 2 | V | VCC=2.7V～3.6V | 6 | ||
| 输入低电平电压 (LOW-level input voltage) | VIL | 0.7 | V | VCC=2.3V～2.7V | 6 | ||
| 输入低电平电压 (LOW-level input voltage) | VIL | 0.8 | V | VCC=2.7V～3.6V | 6 | ||
| 输出高电平电压 (HIGH-level output voltage) | VOH | 0.95 | V | IO=-4mA；VCC=1.65V | 6 | ||
| 输出高电平电压 (HIGH-level output voltage) | VOH | 1.7 | V | IO=-8mA；VCC=2.3V | 6 | ||
| 输出高电平电压 (HIGH-level output voltage) | VOH | 1.9 | V | IO=-12mA；VCC=2.7V | 6 | ||
| 输出高电平电压 (HIGH-level output voltage) | VOH | 2 | V | IO=-24mA；VCC=3.0V | 6 | ||
| 输出高电平电压 (HIGH-level output voltage) | VOH | 3.4 | V | IO=-32mA；VCC=4.5V | 6 | ||
| 输出低电平电压 (LOW-level output voltage) | VOL | 0.1 | V | IO=100uA；VCC=1.65V～5.5V | 6 | ||
| 输出低电平电压 (LOW-level output voltage) | VOL | 0.7 | V | IO=4mA；VCC=1.65V | 6 | ||
| 输出低电平电压 (LOW-level output voltage) | VOL | 0.45 | V | IO=8mA；VCC=2.3V | 6 | ||
| 输出低电平电压 (LOW-level output voltage) | VOL | 0.6 | V | IO=12mA；VCC=2.7V | 6 | ||
| 输出低电平电压 (LOW-level output voltage) | VOL | 0.8 | V | IO=24mA；VCC=3.0V | 6 | ||
| 输入漏电流 (Input leakage current) | II | -1 | 1 | uA | VI=5.5V 或 GND；VCC=0～5.5V | 6 | |
| 截止状态输出电流 (OFF-state output current) | IOZ | -2 | 2 | uA | VI=VIH或 VIL；VO=5.5V 或 GND；VCC=3.6V | 6 | |
| 掉电漏电流 (Power-down leakage current) | IOFF | -2 | 2 | uA | VI 或 VO=5.5V；VCC=0V | 6 | |
| 静态电流 (Quiescent supply current) | ICC | 4 | uA | VI =5.5V 或 GND；IO=0A；VCC=1.65V～5.5V | 6 | ||
| 串通电流 (Additional supply current per input pin) | ∆ICC | 500 | uA | 每个引脚；VI=VCC-0.6V；IO=0A；VCC =2.3V～5.5V | 6 | ||
| A到Y的传输延时 (Propagation delay A to Y) | tpd | 1 | 10.5 | ns | VCC=1.65V～1.95V；见图5 | 8 | |
| A到Y的传输延时 (Propagation delay A to Y) | tpd | 0.5 | 7 | ns | VCC=2.3V～2.7V；见图5 | 8 | |
| A到Y的传输延时 (Propagation delay A to Y) | tpd | 0.5 | 6 | ns | VCC=3.0V～3.6V；见图5 | 8 | |
| A到Y的传输延时 (Propagation delay A to Y) | tpd | 0.5 | 5.5 | ns | VCC=4.5V～5.5V；见图5 | 8 | |
| OE到Y的使能时间 (Enable time OE to Y) | ten | 1 | 12 | ns | VCC=1.65V～1.95V；见图6 | 8 | |
| OE到Y的使能时间 (Enable time OE to Y) | ten | 0.5 | 8.5 | ns | VCC=2.3V～2.7V；见图6 | 8 | |
| OE到Y的使能时间 (Enable time OE to Y) | ten | 0.5 | 7 | ns | VCC=3.0V～3.6V；见图6 | 8 | |
| OE到Y的使能时间 (Enable time OE to Y) | ten | 0.5 | 6.5 | ns | VCC=4.5V～5.5V；见图6 | 8 | |
| OE到Y的失能时间 (Disable time OE to Y) | tdis | 1 | 12 | ns | VCC=1.65V～1.95V；见图6 | 8 | |
| OE到Y的失能时间 (Disable time OE to Y) | tdis | 0.5 | 7 | ns | VCC=2.3V～2.7V；见图6 | 8 | |
| OE到Y的失能时间 (Disable time OE to Y) | tdis | 0.5 | 5.5 | ns | VCC=4.5V～5.5V；见图6 | 8 |
CAD (KiCad official)
- Symbol:
AIP74LVC1G126GC353.TR - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SOT-353 (KiCad packages3D, STEP)
- 3D model files:
aip74lvc1g126gc353-tr-etched.step/aip74lvc1g126gc353-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);aip74lvc1g126gc353-tr.step/aip74lvc1g126gc353-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Wuxi I core Elec datasheet (12 pp, sha256
ae1a954b5b205c93, retrieved 2026-10-20, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).