# AiP6150HSA8.TB

**Wuxi I-core Elec** · Motor Driver ICs · SOP-8

AiP6150HSA8.TB from Wuxi I-core Elec, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Logic and control supply, recommended 3V to 5.5V with absolute maximum 6V, internally independent of VM; when VCC is removed the circuit enters standby mode. |
| 2 | INA | input | Forward logic input; at VCC=5V the high-level threshold is at least 0.7*VCC and the low-level threshold is at most 0.6V, with about 106kΩ pull-down and 47uA typical high-level input current. |
| 3 | INB | input | Reverse logic input; at VCC=5V the high-level threshold is at least 0.7*VCC and the low-level threshold is at most 0.6V, with about 106kΩ pull-down and 47uA typical high-level input current. |
| 4 | VM | power_in | Motor power supply, 8V to 24V recommended with absolute maximum 30V, needing a local bulk decoupling capacitor C1 of at least 10uF (47uF or more recommended in application notes). |
| 5 | OUTB | output | Reverse-direction H-bridge output, driving high in reverse mode and low in forward and brake modes, with continuous output current of 0.45 to 0.55A and peak current limited to 1.5A. |
| 6 | AGND | power_in | Logic power ground for the control circuitry, which must be single-point connected with PGND as described in the application notes. |
| 7 | PGND | power_in | Power ground for the high-current path, which must connect directly and close to the negative terminal of the VM decoupling capacitor C1. |
| 8 | OUTA | output | Forward-direction H-bridge output, driving high in forward mode and low in reverse and brake modes, with continuous output current of 0.45 to 0.55A and peak current limited to 1.5A. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Wuxi I-core Elec |
| Package | SOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 最大逻辑控制电源电压 | VCC(MAX) |  |  | 6 | V |  | 6 |
| 最大功率电源电压 | VM(MAX) |  |  | 30 | V |  | 6 |
| 最大峰值输出电流 | IOUT(PEAK) |  |  | 1.5 | A |  | 6 |
| 最大功耗 | PD |  |  | 1 | W |  | 6 |
| 结到环境热阻 | θJAS |  |  | 123 | ℃/W |  | 6 |
| 工作温度范围 | Topr | -40 |  | 85 | ℃ |  | 6 |
| 结温 | TJ |  |  | 150 | ℃ |  | 6 |
| 储存温度 | Tstg | -55 |  | 150 | ℃ |  | 6 |
| 焊接温度 | TL |  |  | 250 | ℃ | 10秒 | 6 |
| ESD | ESD |  |  | 2000 | V |  | 6 |
| 逻辑和控制电源电压 | VCC | 3 |  | 5.5 | V |  | 6 |
| 功率电源电压 | VM | 8 |  | 24 | V |  | 6 |
| 推荐工作条件下芯片内部结温 | TJ |  |  | 125 | ℃ | 推荐工作条件下 | 6 |
| 输入低电平 | VINL |  |  | 0.6 | V | VCC=5V | 7 |

## CAD (KiCad official)

- Symbol: `AiP6150HSA8.TB`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `aip6150hsa8-tb-etched.step` / `aip6150hsa8-tb-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `aip6150hsa8-tb.step` / `aip6150hsa8-tb.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Wuxi I-core Elec datasheet](docs/aip6150hsa8-tb-datasheet.pdf) (16 pp, sha256 `d203d6d6ca374211`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/aip6150hsa8-tb-datasheet.pdf)