component
AiP431GA23.TR
Public Made by Adomby adom
Wuxi I-core Elec Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAiP431GA23.TR
Wuxi I-core Elec · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23
AiP431GA23.TR from Wuxi I-core Elec, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode is the shunt current path of the reference, rated at a maximum cathode-anode voltage of 37 V (36 V recommended operating) and a cathode current of 1 mA to 100 mA in regulation, with an absolute maximum of 150 mA. |
| 2 | Ref | input | Ref is the reference input that sets the output voltage through an external divider, with a reference voltage of about 2.495 V and a reference input current of 2 µA typical (4 µA max), and an absolute maximum reference input current of 10 mA. |
| 3 | Anode | passive | Anode is the common terminal of the shunt reference; the datasheet states no separate electrical limit for this pin beyond the cathode-anode ratings. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Wuxi I-core Elec |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference voltage (基准电压) | Vref | 2470 | 2495 | 2520 | mV | VKA=Vref，IKA=10mA | 7 |
| Reference input voltage deviation over full temperature range (全温度范围内基准输入电压偏差) | VI（dev） | 6 | 16 | mV | 全温度范围内；VKA=Vref，IKA=10mA | 7 | |
| Reference voltage line regulation (基准电压调整率) | ΔVref/ΔVKA | -1.4 | -2.7 | mV/V | IKA=10mA，ΔVKA=10V～Vref | 7 | |
| Reference voltage line regulation (基准电压调整率) | ΔVref/ΔVKA | -1 | -2 | mV/V | IKA=10mA，ΔVKA=36V～10V | 7 | |
| Reference input current (基准输入电流) | Iref | 2 | 4 | μA | IKA=10mA，R1=10kΩ，R2=∞ | 7 | |
| Reference input current deviation over full temperature range (全温度范围内基准输入电流偏差) | II（dev） | 0.8 | 1.2 | μA | 全温度范围内；IKA=10mA，R1=10kΩ，R2=∞ | 7 | |
| Minimum cathode current for regulation (稳压时最小阴极电流) | Imin | 0.4 | 1 | mA | VKA=Vref | 7 | |
| Off-state cathode current (关断状态阴极电流) | Ioff | 0.1 | 1 | μA | VKA=36V，Vref=0 | 7 | |
| Dynamic impedance (动态阻抗) | /ZKA/ | 0.2 | 0.5 | Ω | VKA=Vref，f=1kHz，IKA=1mA～100mA | 7 | |
| Cathode voltage (阴极电压) | VKA | 36 | V | 7 | |||
| Cathode current (阴极续流电流) | IKA | 1 | 100 | mA | 7 | ||
| Operating ambient temperature (工作环境温度) | Tamb | -40 | 85 | ℃ | 7 | ||
| Cathode voltage (阴极电压) | VKA | 37 | V | 6 | |||
| Cathode continuous current (阴极续流电流) | IKA | -100 | 150 | mA | 6 | ||
| Reference input current (基准输入电流, absolute) | II(ref) | -0.05 | 10 | mA | 6 | ||
| Storage temperature (贮存温度) | Tstg | -65 | 150 | ℃ | 6 | ||
| Soldering temperature, SOT23 (焊接温度) | TL | 260 | ℃ | 10 s，SOT23 package | 6 | ||
| Thermal resistance, junction-to-ambient, SOT23 (热阻（环境）) | θJA | 206 | ℃/W | SOT23 | 6 | ||
| Thermal resistance, junction-to-case, SOT23 (热阻（外壳）) | θJC | 145.2 | ℃/W | SOT23 | 6 |
CAD (KiCad official)
- Symbol:
AiP431GA23.TR - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
aip431ga23-tr-etched.step/aip431ga23-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);aip431ga23-tr.step/aip431ga23-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Wuxi I-core Elec datasheet (12 pp, sha256
f4c7631974cdf2dd, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).