component

AiP3844SA8.TR

Public Made by Adom

by adom

Wuxi I core Elec Power Management - Specialized, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management (pmic)aip3844sa8.trfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 13d ago
viewers aip3844sa8-tr: viewers · Ray 13d ago
aip3844sa8-tr-etched.glb Publish 0.1.0 · Ray 13d ago
aip3844sa8-tr-etched.step aip3844sa8-tr: factory component page (tier=lcsc) · Ray 13d ago
aip3844sa8-tr-hero.glb aip3844sa8-tr: hero GLB from the etched model (keeps the MPN mark) · Ray 13d ago
aip3844sa8-tr-hero.overlay.json Publish 0.1.0 · Ray 13d ago
aip3844sa8-tr.glb Publish 0.1.0 · Ray 13d ago
aip3844sa8-tr.kicad_mod Publish 0.1.0 · Ray 13d ago
aip3844sa8-tr.kicad_sym Publish 0.1.0 · Ray 13d ago
aip3844sa8-tr.lbr Publish 0.1.0 · Ray 13d ago
aip3844sa8-tr.step Publish 0.1.0 · Ray 13d ago
package.json Publish 0.1.0 · Ray 13d ago
page.json Set visibility: public · Ray 13d ago
README.md Publish 0.1.0 · Ray 13d ago

AiP3844SA8.TR

Wuxi I core Elec · Power Management - Specialized · SOP-8

AiP3844SA8.TR from Wuxi I core Elec, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP output This pin is the Error Amplifier output and is made available for loop compensation.
2 VFB input This is the inverting input of the Error Amplifier, normally connected to the switching power supply output through a resistor divider.
3 ISENSE input A voltage proportional to inductor current is connected to this input, and the PWM uses this information to terminate the output switch conduction.
4 RT/CT passive The oscillator frequency and maximum output duty cycle are programmed by connecting resistor RT to VREF and capacitor CT to ground, and operation to 500kHz is possible.
5 GROUND power_in This pin is the combined control circuitry and power ground.
6 OUTPUT output This output directly drives the gate of a power MOSFET, and peak currents up to 1A are sourced and sunk by this pin.
7 Vi power_in This pin is the positive supply of the control IC, with a stated absolute maximum supply voltage of 30 V for a low-impedance source.
8 VREF power_out This is the reference output that provides charging current for capacitor CT through resistor RT.

Key specifications

Parameter Value
Manufacturer Wuxi I core Elec
Package SOP-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
reference output voltage VREF 4.9 5 5.1 V Io=1mA 4
line regulation △VREF 2 20 mV 12V≤Vi≤25V 4
load regulation △VREF 3 25 mV 1≤Io≤20mA 4
total output variation 4.82 5.18 V line, load, temperature 4
output short circuit current ISC -30 -100 -180 mA 4
oscillator frequency fOSC 49 52 55 kHz Tj=25℃ 4
oscillator frequency fOSC 48 56 kHz Tamb=Tlow to Thigh 4
oscillator frequency fOSC 225 250 275 kHz Tj=25℃ (RT=6.2k Ω, CT=1nF) 4
frequency change with voltage △fOSC /△V 0.2 1 % Vi=12V~25V 4
discharge current Idischg 7.8 8.3 8.8 mA VOSC =2V; Tj=25℃, Tamb=-40 to 85℃ 4
input voltage V2 2.42 2.5 2.58 V VPIN1=2.5V 4
input bias current Ib -0.1 -2 uA VFB=5V 4
AVOL AVOL 65 90 dB 2V≤Vo≤4V 4
unity gain bandwidth BW 0.7 1 MHz Tj=25℃ 4
power supply rejection ratio PSRR 60 70 dB 12V≤Vi≤25V 5
output sink current IO 2 12 mA VPIN2=2.7V, VPIN1=1.1V 5
output source current IO -0.5 -1 mA VPIN2=2.3V, VPIN1=5V 5
VOUT High VOUT High 5 6.2 V VPIN2=2.3V; RL=15KΩ to ground 5
VOUT Low VOUT Low 0.8 1.1 V VPIN2=2.7V; RL=15KΩ to PIN 8 5
gain GV 2.85 3 3.15 V/V 5
maximum input signal V3 0.9 1 1.1 V VPIN1=5V 5
supply voltage rejection SVR 70 dB 12V≤Vi≤25V 5
input bias current Ib -2 -10 uA 5
delay to output 150 300 ns 5
output low level VOL 0.1 0.4 V Isink=20mA 5
output low level VOL 1.6 2.2 V Isink=200mA 5
output high level VOH 13 13.5 V Isource=20mA 5
output high level VOH 12 13.5 V Isource=200mA 5
UVLO saturation VOLS 0.1 1.1 V Vi=6V, ISINK=1mA 5
rise time tr 50 150 ns CL=1nF 5
fall time tf 50 150 ns CL=1nF 5
start threshold VTH(ST) 14.5 16 17.5 V AiP3842/4 5
min operating voltage after turn-on VOPR(MIN) 8.5 10 11.5 V AiP3842/4 5
maximum duty cycle 47 48 50 % AiP3844/5 5
minimum duty cycle 0 % 5
start-up current Ist 0.3 0.5 mA Vi=14V, AiP3842/4 5
operating supply current Ii 12 20 mA VPIN2=VPIN3=0V 5
zener voltage Viz 30 36 V Ii=25mA 5
supply voltage (low impedance source) Vi 30 V 4
output current IO -1 1 A 4
power dissipation PD 1 W 4
error amplifier output sink current Isink(EA) 10 mA 4
analog inputs Vin(EA) -0.3 6.3 V 4
operating temperature Tamb -40 85 ℃ 4
storage temperature Tstg -65 150 ℃ 4
soldering temperature (SOP8) TL 250 ℃ 10s 4

CAD (KiCad official)

  • Symbol: AiP3844SA8.TR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: aip3844sa8-tr-etched.step / aip3844sa8-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); aip3844sa8-tr.step / aip3844sa8-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Wuxi I core Elec datasheet (9 pp, sha256 2d943b64700494f5, retrieved 2026-10-21, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF