main
Ray
Publish 0.1.0
c8b6292
AIP1723SA.TB
Wuxi I-core Elec · LCD Drivers · SOP-32-300mil
AIP1723SA.TB from Wuxi I-core Elec, in a SOP-32-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Logic supply voltage, recommended 2.7 V to 5.5 V with an absolute maximum of -0.5 V to +6.0 V. |
| 2 | DIO | bidirectional | Serial data line: data is sampled on the CLK rising edge and output on the falling edge, LSB first, as an N-channel open-drain output that needs an external pull-up of 1K to 10K (10K recommended). |
| 3 | CLK | input | Serial clock input: data is read on the rising edge and output on the falling edge. |
| 4 | STB | input | Chip select: the serial interface is initialized on the falling edge, the first byte after STB goes low is taken as a command, and CLK and DIO are ignored while STB is high. |
| 5 | GND | power_in | Ground reference, 0 V. |
| 6 | KS1 | output | Key-scan output signal for the keyboard matrix. |
| 7 | KS2 | output | Key-scan output signal for the keyboard matrix. |
| 8 | KS3 | output | Key-scan output signal for the keyboard matrix. |
| 9 | SEG31/KI3 | bidirectional | Composite port configurable as LCD segment output or key-scan input, supporting up to 4x3 keys. |
| 10 | SEG30/KI2 | bidirectional | Composite port configurable as LCD segment output or key-scan input, supporting up to 4x3 keys. |
| 11 | SEG29/KI1 | bidirectional | Composite port configurable as LCD segment output or key-scan input, supporting up to 4x3 keys. |
| 12 | SEG28/KI0 | bidirectional | Composite port configurable as LCD segment output or key-scan input, supporting up to 4x3 keys. |
| 13 | SEG25/SW1 | bidirectional | Composite port configurable as LCD segment output or general-purpose input for a rotary encoder switch. |
| 14 | SEG24/SW0 | bidirectional | Composite port configurable as LCD segment output or general-purpose input for a rotary encoder switch. |
| 15 | SEG23/PWM3 | bidirectional | Composite port configurable as LCD segment output or PWM output with 16 levels for LCD backlight drive. |
| 16 | SEG22/PWM2 | bidirectional | Composite port configurable as LCD segment output or PWM output with 16 levels for LCD backlight drive. |
| 17 | SEG21/PWM1 | bidirectional | Composite port configurable as LCD segment output or PWM output with 16 levels for LCD backlight drive. |
| 18 | SEG20/PWM0 | bidirectional | Composite port configurable as LCD segment output or PWM output with 16 levels for LCD backlight drive. |
| 19 | SEG19 | output | LCD segment drive output. |
| 20 | SEG18 | output | LCD segment drive output. |
| 21 | SEG11 | output | LCD segment drive output. |
| 22 | SEG10 | output | LCD segment drive output. |
| 23 | SEG9 | output | LCD segment drive output. |
| 24 | SEG8 | output | LCD segment drive output. |
| 25 | SEG7 | output | LCD segment drive output. |
| 26 | SEG6 | output | LCD segment drive output. |
| 27 | SEG5 | output | LCD segment drive output. |
| 28 | SEG4 | output | LCD segment drive output. |
| 29 | COM3 | output | LCD common drive output. |
| 30 | COM2 | output | LCD common drive output. |
| 31 | COM1 | output | LCD common drive output. |
| 32 | COM0 | output | LCD common drive output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Wuxi I-core Elec |
| Package | SOP-32-300mil |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 32 |
CAD (KiCad official)
- Symbol:
AIP1723SA.TB - Footprint:
Package_SO:SOIC-32_7.518x20.777mm_P1.27mm - 3D model: SOP-32-300mil (KiCad packages3D, STEP)
- 3D model files:
aip1723sa-tb-etched.step/aip1723sa-tb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);aip1723sa-tb.step/aip1723sa-tb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Wuxi I-core Elec datasheet, copy hosted by LCSC (21 pp, sha256
9230d739678b1ad1, retrieved 2026-11-20) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AIP1723SA.TB
**Wuxi I-core Elec** · LCD Drivers · SOP-32-300mil
AIP1723SA.TB from Wuxi I-core Elec, in a SOP-32-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Logic supply voltage, recommended 2.7 V to 5.5 V with an absolute maximum of -0.5 V to +6.0 V. |
| 2 | DIO | bidirectional | Serial data line: data is sampled on the CLK rising edge and output on the falling edge, LSB first, as an N-channel open-drain output that needs an external pull-up of 1K to 10K (10K recommended). |
| 3 | CLK | input | Serial clock input: data is read on the rising edge and output on the falling edge. |
| 4 | STB | input | Chip select: the serial interface is initialized on the falling edge, the first byte after STB goes low is taken as a command, and CLK and DIO are ignored while STB is high. |
| 5 | GND | power_in | Ground reference, 0 V. |
| 6 | KS1 | output | Key-scan output signal for the keyboard matrix. |
| 7 | KS2 | output | Key-scan output signal for the keyboard matrix. |
| 8 | KS3 | output | Key-scan output signal for the keyboard matrix. |
| 9 | SEG31/KI3 | bidirectional | Composite port configurable as LCD segment output or key-scan input, supporting up to 4x3 keys. |
| 10 | SEG30/KI2 | bidirectional | Composite port configurable as LCD segment output or key-scan input, supporting up to 4x3 keys. |
| 11 | SEG29/KI1 | bidirectional | Composite port configurable as LCD segment output or key-scan input, supporting up to 4x3 keys. |
| 12 | SEG28/KI0 | bidirectional | Composite port configurable as LCD segment output or key-scan input, supporting up to 4x3 keys. |
| 13 | SEG25/SW1 | bidirectional | Composite port configurable as LCD segment output or general-purpose input for a rotary encoder switch. |
| 14 | SEG24/SW0 | bidirectional | Composite port configurable as LCD segment output or general-purpose input for a rotary encoder switch. |
| 15 | SEG23/PWM3 | bidirectional | Composite port configurable as LCD segment output or PWM output with 16 levels for LCD backlight drive. |
| 16 | SEG22/PWM2 | bidirectional | Composite port configurable as LCD segment output or PWM output with 16 levels for LCD backlight drive. |
| 17 | SEG21/PWM1 | bidirectional | Composite port configurable as LCD segment output or PWM output with 16 levels for LCD backlight drive. |
| 18 | SEG20/PWM0 | bidirectional | Composite port configurable as LCD segment output or PWM output with 16 levels for LCD backlight drive. |
| 19 | SEG19 | output | LCD segment drive output. |
| 20 | SEG18 | output | LCD segment drive output. |
| 21 | SEG11 | output | LCD segment drive output. |
| 22 | SEG10 | output | LCD segment drive output. |
| 23 | SEG9 | output | LCD segment drive output. |
| 24 | SEG8 | output | LCD segment drive output. |
| 25 | SEG7 | output | LCD segment drive output. |
| 26 | SEG6 | output | LCD segment drive output. |
| 27 | SEG5 | output | LCD segment drive output. |
| 28 | SEG4 | output | LCD segment drive output. |
| 29 | COM3 | output | LCD common drive output. |
| 30 | COM2 | output | LCD common drive output. |
| 31 | COM1 | output | LCD common drive output. |
| 32 | COM0 | output | LCD common drive output. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Wuxi I-core Elec |
| Package | SOP-32-300mil |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 32 |
## CAD (KiCad official)
- Symbol: `AIP1723SA.TB`
- Footprint: `Package_SO:SOIC-32_7.518x20.777mm_P1.27mm`
- 3D model: SOP-32-300mil (KiCad packages3D, STEP)
- 3D model files: `aip1723sa-tb-etched.step` / `aip1723sa-tb-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `aip1723sa-tb.step` / `aip1723sa-tb.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Wuxi I-core Elec datasheet, copy hosted by LCSC](docs/aip1723sa-tb-datasheet.pdf) (21 pp, sha256 `9230d739678b1ad1`, retrieved 2026-11-20)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/aip1723sa-tb-datasheet.pdf)