component
AIC1896GGTR
Public Made by Adomby adom
AIC Analog Integrations DC-DC Converters, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AIC1896GGTR
AIC Analog Integrations · DC-DC Converters · SOT-23-6
AIC1896GGTR from AIC Analog Integrations, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Power switching connection to the inductor and output rectifier; keep the connection to LX as short as possible, and LX is rated -0.3V to +33V with a 0.6A RMS pin current. |
| 2 | GND | power_in | Ground reference for the converter; FB, SS and IN are referenced to this pin. |
| 3 | FB | input | Feedback input; a resistive divider from the output to FB sets the output voltage, with a 1.23V feedback reference and FB rated -0.3V to +6V. |
| 4 | SHDN | input | Shutdown input that turns the converter off when driven low; connect to IN for automatic start, drive with a slew rate of 0.1V/µs or greater, do not leave unconnected, and it draws up to 50µA. |
| 5 | SS | input | Soft-start input; a capacitor from SS to GND sets the soft-start ramp, and leaving SS open disables soft-start; SS is rated -0.3V to +6V. |
| 6 | IN | power_in | Internal bias voltage input connected to the input supply (2.5V to 10V operating range), to be bypassed to GND with a capacitor placed as close to IN as possible; IN is rated -0.3V to +11V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AIC Analog Integrations |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Range | VIN | 2.5 | 10 | V | 4 | ||
| Output Voltage Adjust Range | VOUT | 30 | V | 4 | |||
| VIN Undervoltage Lockout | UVLO | 2.2 | V | VIN rising, 50mV hysteresis | 4 | ||
| Quiescent Current | IIN | 0.1 | 0.2 | mA | VFB = 1.3V, not switching | 4 | |
| Quiescent Current | IIN | 1 | 5 | mA | VFB = 1.0V, switching | 4 | |
| Shutdown Supply Current | 0.01 | 0.5 | µA | VSHDN = 0, TA = +25°C | 4 | ||
| Shutdown Supply Current | 0.01 | 10 | µA | VSHDN = 0 | 4 | ||
| Feedback Regulation Set Point | VFB | 1.205 | 1.23 | 1.255 | V | 4 | |
| FB Input Bias Current | IFB | 21 | 80 | nA | VFB = 1.24V | 4 | |
| Line Regulation | 0.05 | 0.2 | %/V | 2.6V < VIN < 5.5V | 4 | ||
| Oscillator Frequency | fOSC | 1000 | 1400 | 1800 | KHz | 4 | |
| Maximum Duty Cycle | DC | 82 | 86 | % | 4 | ||
| On-Resistance | RDS(ON) | 1 | 1.4 | Ω | Vin = 5V | 4 | |
| Leakage Current | ILX(OFF) | 0.1 | 1 | µA | VLX = 30V, TA = +25°C | 4 | |
| Leakage Current | ILX(OFF) | 10 | µA | VLX = 30V | 4 | ||
| Reset Switch Resistance | 100 | Ω | Guaranteed By Design | 4 | |||
| Charge Current | 1.5 | 4 | 7 | µA | VSS = 1.2V | 4 | |
| Input Low Voltage | VIL | 0.3 | V | VSHDN, VIN = 2.5V to 10V | 4 | ||
| Input High Voltage | VIH | 1 | V | VSHDN, VIN = 2.5V to 10V | 4 | ||
| SHDN Input Current | ISHDN | 25 | 50 | µA | VSHDN = 1.8V | 4 | |
| SHDN Input Current | ISHDN | 0.01 | 0.1 | µA | VSHDN = 0 | 4 | |
| LX to GND voltage | -0.3 | 33 | V | 3 | |||
| FB to GND voltage | -0.3 | 6 | V | 3 | |||
| IN, SHDN voltage | -0.3 | 11 | V | 3 | |||
| SS to GND voltage | -0.3 | 6 | V | 3 | |||
| LX Pin RMS Current | 0.6 | A | 3 | ||||
| Continuous Power Dissipation | 727 | mW | 3 | ||||
| Operating Temperature Range | -40 | 85 | °C | 3 | |||
| Junction Temperature | 125 | °C | 3 | ||||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Lead Temperature (soldering, 10s) | 260 | °C | 10s soldering | 3 |
CAD (KiCad official)
- Symbol:
AIC1896GGTR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
aic1896ggtr-etched.step/aic1896ggtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);aic1896ggtr.step/aic1896ggtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AIC Analog Integrations datasheet (15 pp, sha256
e04cef9754188ef9, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AIC1896GGTR
**AIC Analog Integrations** · DC-DC Converters · SOT-23-6
AIC1896GGTR from AIC Analog Integrations, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Power switching connection to the inductor and output rectifier; keep the connection to LX as short as possible, and LX is rated -0.3V to +33V with a 0.6A RMS pin current. |
| 2 | GND | power_in | Ground reference for the converter; FB, SS and IN are referenced to this pin. |
| 3 | FB | input | Feedback input; a resistive divider from the output to FB sets the output voltage, with a 1.23V feedback reference and FB rated -0.3V to +6V. |
| 4 | SHDN | input | Shutdown input that turns the converter off when driven low; connect to IN for automatic start, drive with a slew rate of 0.1V/µs or greater, do not leave unconnected, and it draws up to 50µA. |
| 5 | SS | input | Soft-start input; a capacitor from SS to GND sets the soft-start ramp, and leaving SS open disables soft-start; SS is rated -0.3V to +6V. |
| 6 | IN | power_in | Internal bias voltage input connected to the input supply (2.5V to 10V operating range), to be bypassed to GND with a capacitor placed as close to IN as possible; IN is rated -0.3V to +11V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AIC Analog Integrations |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Range | VIN | 2.5 | | 10 | V | | 4 |
| Output Voltage Adjust Range | VOUT | | | 30 | V | | 4 |
| VIN Undervoltage Lockout | UVLO | | 2.2 | | V | VIN rising, 50mV hysteresis | 4 |
| Quiescent Current | IIN | | 0.1 | 0.2 | mA | VFB = 1.3V, not switching | 4 |
| Quiescent Current | IIN | | 1 | 5 | mA | VFB = 1.0V, switching | 4 |
| Shutdown Supply Current | | | 0.01 | 0.5 | µA | VSHDN = 0, TA = +25°C | 4 |
| Shutdown Supply Current | | | 0.01 | 10 | µA | VSHDN = 0 | 4 |
| Feedback Regulation Set Point | VFB | 1.205 | 1.23 | 1.255 | V | | 4 |
| FB Input Bias Current | IFB | | 21 | 80 | nA | VFB = 1.24V | 4 |
| Line Regulation | | | 0.05 | 0.2 | %/V | 2.6V < VIN < 5.5V | 4 |
| Oscillator Frequency | fOSC | 1000 | 1400 | 1800 | KHz | | 4 |
| Maximum Duty Cycle | DC | | 82 | 86 | % | | 4 |
| On-Resistance | RDS(ON) | | 1 | 1.4 | Ω | Vin = 5V | 4 |
| Leakage Current | ILX(OFF) | | 0.1 | 1 | µA | VLX = 30V, TA = +25°C | 4 |
| Leakage Current | ILX(OFF) | | | 10 | µA | VLX = 30V | 4 |
| Reset Switch Resistance | | | 100 | | Ω | Guaranteed By Design | 4 |
| Charge Current | | 1.5 | 4 | 7 | µA | VSS = 1.2V | 4 |
| Input Low Voltage | VIL | | | 0.3 | V | VSHDN, VIN = 2.5V to 10V | 4 |
| Input High Voltage | VIH | 1 | | | V | VSHDN, VIN = 2.5V to 10V | 4 |
| SHDN Input Current | ISHDN | | 25 | 50 | µA | VSHDN = 1.8V | 4 |
| SHDN Input Current | ISHDN | | 0.01 | 0.1 | µA | VSHDN = 0 | 4 |
| LX to GND voltage | | -0.3 | | 33 | V | | 3 |
| FB to GND voltage | | -0.3 | | 6 | V | | 3 |
| IN, SHDN voltage | | -0.3 | | 11 | V | | 3 |
| SS to GND voltage | | -0.3 | | 6 | V | | 3 |
| LX Pin RMS Current | | | | 0.6 | A | | 3 |
| Continuous Power Dissipation | | | | 727 | mW | | 3 |
| Operating Temperature Range | | -40 | | 85 | °C | | 3 |
| Junction Temperature | | | | 125 | °C | | 3 |
| Storage Temperature Range | | -65 | | 150 | °C | | 3 |
| Lead Temperature (soldering, 10s) | | | | 260 | °C | 10s soldering | 3 |
## CAD (KiCad official)
- Symbol: `AIC1896GGTR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `aic1896ggtr-etched.step` / `aic1896ggtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `aic1896ggtr.step` / `aic1896ggtr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [AIC Analog Integrations datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881231111340032) (15 pp, sha256 `e04cef9754188ef9`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/aic1896ggtr-datasheet.pdf)