component
AI02C sop8
Public Made by Adomby adom
Sam wing Touch Sensors, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownAI02C sop8
Sam wing · Touch Sensors · SOP-8
AI02C sop8 from Sam wing, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground (0 V) reference for the device. |
| 2 | C1 | passive | Internal reference capacitor pin. Connect a 4.7 nF (range 1 nF-10 nF) NPO-grade capacitor to GND, placed close to the IC. Sets the internal balance/reference capacitance for the sensing engine. |
| 3 | KEY1 | input | Capacitive touch sense input for channel 1. Connects through a 2 kΩ series resistor to the touch pad/electrode; an optional CX sensitivity capacitor (0-10 pF, typ. 0 pF/open) tunes sensitivity. |
| 4 | KEY2 | input | Capacitive touch sense input for channel 2. Connects through a 2 kΩ series resistor to the touch pad/electrode; optional CX sensitivity capacitor (0-10 pF) tunes sensitivity. |
| 5 | OUT2 | output | Channel 2 touch output. Polarity and behavior depend on the MD pin: MD floating → open-drain active-low (needs external pull-up); MD=VDD → push-pull direct active-high; MD=GND → toggle/latched output (initial low). |
| 6 | OUT1 | output | Channel 1 touch output. Polarity and behavior depend on the MD pin: MD floating → open-drain active-low (needs external pull-up); MD=VDD → push-pull direct active-high; MD=GND → toggle/latched output (initial low). |
| 7 | MD | input | Output mode select. Float = open-drain active-low output (external pull-up required). Tied to VDD = direct/push-pull active-high (momentary). Tied to GND = toggle (self-latching) mode, initial state low. |
| 8 | VDD | power_in | Positive supply, 2.5-5.5 V (absolute max 6.0 V). A 20 Ω series resistor between the board VDD and this pin plus a 100 nF decoupling capacitor to GND is recommended. Typical operating current 394 µA @ 3 V, 666 µA @ 5 V; sleep current 7 µA @ 3 V, 11 µA @ 5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sam wing |
| Package | SOP-8 |
| Category | Sensor |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
AI02C sop8 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ai02c-sop8-etched.step/ai02c-sop8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ai02c-sop8.step/ai02c-sop8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sam wing datasheet (8 pp, sha256
dfb17da9fde947e4, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).