component

AI01Z

Public Made by Adom

by adom

Sam wing Touch Sensors, SOT23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentsensorai01z
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ai01z: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 4d ago
viewers ai01z: viewers · Ray 29d ago
ai01z-etched.fit.json ai01z: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 4d ago
ai01z-etched.glb ai01z: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 4d ago
ai01z-etched.step ai01z: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 4d ago
ai01z.glb Publish 0.1.0 · Ray 29d ago
ai01z.kicad_mod Publish 0.1.0 · Ray 29d ago
ai01z.kicad_sym Publish 0.1.0 · Ray 29d ago
ai01z.lbr Publish 0.1.0 · Ray 29d ago
ai01z.step Publish 0.1.0 · Ray 29d ago
package.json Publish 0.1.0 · Ray 29d ago
page.json ai01z: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray 16h ago
README.md ai01z: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 20d ago

AI01Z

Sam wing · Touch Sensors · SOT23-6

AI01Z from Sam wing, in a SOT23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply input. Operating range 2.5 V to 6.0 V. A 100 nF decoupling capacitor and a recommended 20 Ω series resistor to VDD are shown in the reference schematic.
2 GND power_in Ground / negative supply reference.
3 OUT output CMOS touch-detection output. Active-low: high when idle, pulled low while a finger is on the sense pad. Max sink current 10 mA at VCC = 5 V. Maximum continuous asserted time is 48 s before an internal timer resets the state.
4 KEY input Touch-sense input; connects to the sense pad/antenna through a recommended 2 kΩ series resistor (RX).
5 CSEL passive Sensitivity-setting capacitor pin. Connect a capacitor to GND (0 pF to 100 pF); smaller capacitance = higher sensitivity. Typically left floating (highest sensitivity) but a PCB pad should be reserved for later tuning. Reference schematic shows 5 pF.
6 C1 passive Internal reference-capacitor pin. Connect a 4.7 nF capacitor to GND (usable range 1 nF to 10 nF).

Key specifications

Parameter Value
Manufacturer Sam wing
Package SOT23-6
Category Sensor
Pins 6

CAD (KiCad official)

  • Symbol: AI01Z
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT23-6 (KiCad packages3D, STEP)
  • 3D model files: ai01z-etched.step / ai01z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ai01z.step / ai01z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Sam wing datasheet (6 pp, sha256 b3a9424cf7e3bb6a, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF