AI01Z

@@ -0,0 +1,42 @@+# AI01Z++**Sam wing** · Touch Sensors · SOT23-6++AI01Z from Sam wing, in a SOT23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD | power_in | Positive supply input. Operating range 2.5 V to 6.0 V. A 100 nF decoupling capacitor and a recommended 20 Ω series resistor to VDD are shown in the reference schematic. |+| 2 | GND | power_in | Ground / negative supply reference. |+| 3 | OUT | output | CMOS touch-detection output. Active-low: high when idle, pulled low while a finger is on the sense pad. Max sink current 10 mA at VCC = 5 V. Maximum continuous asserted time is 48 s before an internal timer resets the state. |+| 4 | KEY | input | Touch-sense input; connects to the sense pad/antenna through a recommended 2 kΩ series resistor (RX). |+| 5 | CSEL | passive | Sensitivity-setting capacitor pin. Connect a capacitor to GND (0 pF to 100 pF); smaller capacitance = higher sensitivity. Typically left floating (highest sensitivity) but a PCB pad should be reserved for later tuning. Reference schematic shows 5 pF. |+| 6 | C1 | passive | Internal reference-capacitor pin. Connect a 4.7 nF capacitor to GND (usable range 1 nF to 10 nF). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Sam wing |+| Package | SOT23-6 |+| Category | Sensor |+| Pins | 6 |++## CAD (KiCad official)++- Symbol: `AI01Z`+- Footprint: `Package_TO_SOT_SMD:SOT-23-6`+- 3D model: SOT23-6 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Sam wing datasheet](docs/ai01z-datasheet.pdf) (6 pp, sha256 `b3a9424cf7e3bb6a`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ai01z-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "ai01z",+  "version": "0.1.0",+  "type": "component",+  "description": "Sam wing Touch Sensors, SOT23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensor",+    "ai01z"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ai01z.kicad_sym",+    "ai01z.kicad_mod",+    "ai01z.glb",+    "ai01z.step",+    "ai01z.lbr",+    "docs/hero.png",+    "docs/ai01z-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file