component
AI01K sot23-6
Public Made by Adomby adom
Sam wing Touch Sensors, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
main
AI01K sot23-6
Sam wing · Touch Sensors · SOT-23-6
AI01K sot23-6 from Sam wing, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Key sense value output. Behavior depends on MD pin: MD=floating → open-drain active-low (requires external pull-up); MD=VDD → push-pull active-high direct output; MD=GND → toggle/self-latch output starting low, inverting on each press. Isk = 10 mA @ VCC=5V, low-level output impedance ≈ 50 Ω, high-Z impedance ≈ 100 MΩ. |
| 2 | GND | power_in | Ground / negative supply reference (0 V). |
| 3 | KEY | input | Touch sense input pin. Connects to the touch pad (sense antenna) through a series resistor (RX ≈ 2 kΩ typical, range 0-5 kΩ). Minimum detectable capacitance change ≈ 0.2 pF. |
| 4 | MD | input | Output-mode select input. Three states: floating → OUT is active-low open-drain (needs external pull-up); tied to VDD → OUT is active-high push-pull direct output; tied to GND → OUT is toggle/self-latch mode starting low. |
| 5 | VDD | power_in | Positive supply input. Operating range 2.5 V to 6.5 V. Typical Idd = 1.6 mA @ 5.0 V, 0.8 mA @ 3.0 V. Decouple with 100 nF close to pin plus a 20 Ω series resistor from the rail as shown in the reference schematic. |
| 6 | C1 | passive | Internal reference source output. Requires a 4.7 nF capacitor to GND placed close to the pin. Do not load with anything else. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sam wing |
| Package | SOT-23-6 |
| Category | Sensor |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
AI01K sot23-6 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ai01k-sot23-6-etched.step/ai01k-sot23-6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ai01k-sot23-6.step/ai01k-sot23-6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sam wing datasheet (8 pp, sha256
2f962aec2e03de87, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AI01K sot23-6
**Sam wing** · Touch Sensors · SOT-23-6
AI01K sot23-6 from Sam wing, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Key sense value output. Behavior depends on MD pin: MD=floating → open-drain active-low (requires external pull-up); MD=VDD → push-pull active-high direct output; MD=GND → toggle/self-latch output starting low, inverting on each press. Isk = 10 mA @ VCC=5V, low-level output impedance ≈ 50 Ω, high-Z impedance ≈ 100 MΩ. |
| 2 | GND | power_in | Ground / negative supply reference (0 V). |
| 3 | KEY | input | Touch sense input pin. Connects to the touch pad (sense antenna) through a series resistor (RX ≈ 2 kΩ typical, range 0-5 kΩ). Minimum detectable capacitance change ≈ 0.2 pF. |
| 4 | MD | input | Output-mode select input. Three states: floating → OUT is active-low open-drain (needs external pull-up); tied to VDD → OUT is active-high push-pull direct output; tied to GND → OUT is toggle/self-latch mode starting low. |
| 5 | VDD | power_in | Positive supply input. Operating range 2.5 V to 6.5 V. Typical Idd = 1.6 mA @ 5.0 V, 0.8 mA @ 3.0 V. Decouple with 100 nF close to pin plus a 20 Ω series resistor from the rail as shown in the reference schematic. |
| 6 | C1 | passive | Internal reference source output. Requires a 4.7 nF capacitor to GND placed close to the pin. Do not load with anything else. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sam wing |
| Package | SOT-23-6 |
| Category | Sensor |
| Pins | 6 |
## CAD (KiCad official)
- Symbol: `AI01K sot23-6`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `ai01k-sot23-6-etched.step` / `ai01k-sot23-6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ai01k-sot23-6.step` / `ai01k-sot23-6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Sam wing datasheet](docs/ai01k-sot23-6-datasheet.pdf) (8 pp, sha256 `2f962aec2e03de87`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ai01k-sot23-6-datasheet.pdf)