AI Flow: Reverse Engineering

{
 "tests": [
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C1",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C1"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C2",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C2"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C3",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C3"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C4",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C4"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C5",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C5"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C6",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C6"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C7",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C7"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C8",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C8"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C9",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C9"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C10",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C10"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C11",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C11"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C12",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C12"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C13",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C13"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C14",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C14"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C15",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C15"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C16",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C16"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C17",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C17"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C18",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C18"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C19",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C19"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C20",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C20"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C21",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C21"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C22",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C22"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C23",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C23"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-Q1",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "Q1"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-Q2",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "Q2"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-Q3",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "Q3"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-Q4",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "Q4"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-Q5",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "Q5"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-Q6",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "Q6"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C24",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C24"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C25",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C25"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C26",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C26"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C27",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C27"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-R4",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "R4"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C28",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C28"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-JP1",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "JP1"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-U3",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "U3"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-U4",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "U4"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C29",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C29"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C30",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C30"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-R9",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "R9"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C31",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C31"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C32",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C32"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C33",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C33"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-R11",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "R11"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-U5",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "U5"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C34",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C34"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-R13",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "R13"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C35",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C35"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-U6",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "U6"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C36",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C36"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C37",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C37"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C38",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C38"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C39",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C39"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C40",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C40"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C41",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C41"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-U1",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "U1"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C42",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C42"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C43",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C43"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C44",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C44"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C45",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C45"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C46",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C46"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C47",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C47"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C48",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C48"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C49",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C49"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C50",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C50"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-R19",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "R19"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-LED1",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "LED1"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-LED2",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "LED2"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-R20",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "R20"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-R21",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "R21"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-D5",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "D5"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-D6",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "D6"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C51",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C51"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C52",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C52"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-R24",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "R24"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-R25",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "R25"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-R26",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "R26"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-R27",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "R27"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C53",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C53"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C54",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C54"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-R30",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "R30"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C55",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C55"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-R31",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "R31"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-R32",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "R32"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-C56",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "C56"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-H4",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "H4"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-H5",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "H5"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-H6",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "H6"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-H7",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "H7"
   ]
  },
  {
   "equipment": "lamp, loupe or microscope, DMM",
   "expected": "the marking or the measured value",
   "generated": true,
   "id": "T-H8",
   "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
   "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
   "settles": [
    "H8"
   ]
  },
  {
   "equipment": "DMM, microscope",
   "expected": "matches the file",
   "generated": true,
   "id": "T-block-sensing",
   "ifNot": "correct the item and rebuild",
   "method": "Inspect against the photos and measure on the board",
   "settles": [
    "block:sensing"
   ]
  },
  {
   "equipment": "DMM, microscope",
   "expected": "matches the file",
   "generated": true,
   "id": "T-block-logic-supply",
   "ifNot": "correct the item and rebuild",
   "method": "Inspect against the photos and measure on the board",
   "settles": [
    "block:logic-supply"
   ]
  },
  {
   "equipment": "DMM, microscope",
   "expected": "matches the file",
   "generated": true,
   "id": "T-block-gate-driver",
   "ifNot": "correct the item and rebuild",
   "method": "Inspect against the photos and measure on the board",
   "settles": [
    "block:gate-driver"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-bridge-X1",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:PHASE_X1"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-bridge-X3",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:PHASE_X3"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-bridge-X2",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:VIN"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-bridge-caps",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:VIN"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-drv-caps",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:VIN"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-logic",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:VIN"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-power-entry",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:VIN"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-vsense",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:VIN"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-can",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:GND"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-mcu-supply",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:GND"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-aux",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:+3V3"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-headers",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:+3V3"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-leds",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:+3V3"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-drv-csa",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:SOA"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-mcu-pinmap",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:SOA_ADC"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-ntc",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:NTC_ADC"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "every listed pin beeps to the others, and to no pin of another net",
   "generated": true,
   "id": "T-fan",
   "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
   "method": "Continuity from each pin of this net to the others, board unpowered",
   "settles": [
    "net:FAN_PWM_MCU"
   ]
  },
  {
   "equipment": "microscope or X-ray, DMM",
   "expected": "6 copper layers proposed; 4 is the minimum the inner-via candidates allow. A stackup of 4 means tighter routing than the 0.2 mm rule, or copper the router could not place outside the pours",
   "generated": false,
   "id": "T-layers",
   "ifNot": "re-propose the stackup and planes in layers.json",
   "method": "Count copper layers on the board edge under a microscope, or X-ray the board. Then ohm a stitching via in a pour to GND and to +3V3.",
   "settles": [
    "plane:In1.Cu"
   ]
  },
  {
   "equipment": "loupe or microscope, DMM in diode mode",
   "expected": "the orientation recorded in parts.json (pin1)",
   "generated": true,
   "id": "T-D1",
   "ifNot": "turn the part in parts.json and rebuild; check every net on its pins",
   "method": "Find pin 1 or the polarity: the cathode band or pin-1 mark under magnification, or a diode-mode reading across the part in circuit",
   "settles": [
    "D1"
   ]
  },
  {
   "equipment": "loupe or microscope, DMM in diode mode",
   "expected": "the orientation recorded in parts.json (pin1)",
   "generated": true,
   "id": "T-D2",
   "ifNot": "turn the part in parts.json and rebuild; check every net on its pins",
   "method": "Find pin 1 or the polarity: the cathode band or pin-1 mark under magnification, or a diode-mode reading across the part in circuit",
   "settles": [
    "D2"
   ]
  },
  {
   "equipment": "loupe or microscope, DMM in diode mode",
   "expected": "the orientation recorded in parts.json (pin1)",
   "generated": true,
   "id": "T-D3",
   "ifNot": "turn the part in parts.json and rebuild; check every net on its pins",
   "method": "Find pin 1 or the polarity: the cathode band or pin-1 mark under magnification, or a diode-mode reading across the part in circuit",
   "settles": [
    "D3"
   ]
  },
  {
   "equipment": "loupe or microscope, DMM in diode mode",
   "expected": "the orientation recorded in parts.json (pin1)",
   "generated": true,
   "id": "T-D4",
   "ifNot": "turn the part in parts.json and rebuild; check every net on its pins",
   "method": "Find pin 1 or the polarity: the cathode band or pin-1 mark under magnification, or a diode-mode reading across the part in circuit",
   "settles": [
    "D4"
   ]
  },
  {
   "equipment": "loupe or microscope, DMM in diode mode",
   "expected": "the orientation recorded in parts.json (pin1)",
   "generated": true,
   "id": "T-J1",
   "ifNot": "turn the part in parts.json and rebuild; check every net on its pins",
   "method": "Find pin 1 or the polarity: the cathode band or pin-1 mark under magnification, or a diode-mode reading across the part in circuit",
   "settles": [
    "J1"
   ]
  },
  {
   "equipment": "DMM in continuity mode, fine probes",
   "expected": "each pour reads continuous to its stated net and open to the other lugs",
   "generated": false,
   "id": "T-pour-nets",
   "ifNot": "correct the net in nets.json or the pin it disputes in detect/copper-measured.json, then trace and rebuild",
   "method": "With the board unpowered, continuity from each traced pour and track to the pins of its stated net, and to the screw lugs (VIN, GND, X1, X2, X3). For a pour of unknown net, ohm it to GND, VIN and each phase lug.",
   "settles": [
    "zone:isl-top-14",
    "zone:isl-top-15",
    "zone:isl-top-22",
    "zone:isl-top-25",
    "zone:isl-top-34",
    "zone:isl-top-36",
    "zone:isl-top-40",
    "zone:isl-top-41",
    "zone:isl-top-58",
    "zone:isl-top-60",
    "zone:isl-top-61",
    "zone:isl-top-68",
    "zone:isl-top-77",
    "zone:isl-top-79",
    "zone:isl-top-80",
    "zone:isl-top-83",
    "zone:isl-top-89",
    "zone:isl-top-100",
    "zone:isl-top-106",
    "zone:isl-top-110",
    "zone:isl-top-112",
    "zone:isl-top-115",
    "zone:isl-top-133",
    "zone:isl-top-139",
    "zone:isl-top-145",
    "zone:isl-top-146",
    "zone:isl-top-151",
    "zone:isl-top-153",
    "zone:isl-top-158",
    "zone:isl-top-174",
    "zone:isl-top-175",
    "zone:isl-top-184",
    "zone:isl-top-185",
    "zone:isl-top-187",
    "zone:isl-top-193",
    "zone:isl-top-197",
    "zone:isl-top-206",
    "zone:isl-top-218",
    "zone:isl-top-220",
    "zone:isl-top-222",
    "zone:isl-top-225",
    "zone:isl-top-226",
    "zone:isl-top-233",
    "zone:isl-top-240",
    "zone:isl-top-254",
    "zone:isl-top-256",
    "zone:isl-top-260",
    "zone:isl-top-268",
    "zone:isl-top-277",
    "zone:isl-top-279",
    "zone:isl-top-290",
    "zone:isl-top-296",
    "zone:isl-top-300",
    "zone:isl-top-304",
    "zone:isl-top-309",
    "zone:isl-top-310",
    "zone:isl-top-312",
    "zone:isl-top-324",
    "zone:isl-top-328",
    "zone:isl-top-340",
    "zone:isl-top-341",
    "zone:isl-top-351",
    "zone:isl-top-354",
    "zone:isl-top-378",
    "zone:isl-top-398",
    "zone:isl-top-399",
    "zone:isl-top-406",
    "zone:isl-top-412",
    "zone:isl-top-420",
    "zone:isl-top-430",
    "zone:isl-top-437",
    "zone:isl-top-440",
    "zone:isl-top-446",
    "zone:isl-top-450",
    "zone:isl-top-460",
    "zone:isl-top-469",
    "zone:isl-top-474",
    "zone:isl-top-476",
    "zone:isl-top-479",
    "zone:isl-top-482",
    "zone:isl-top-487",
    "zone:isl-top-492",
    "zone:isl-top-494",
    "zone:isl-top-499",
    "zone:isl-top-503",
    "zone:isl-top-512",
    "zone:isl-top-518",
    "zone:isl-top-521",
    "zone:isl-top-523",
    "zone:isl-top-530",
    "zone:isl-top-533",
    "zone:isl-top-542",
    "zone:isl-top-543",
    "zone:isl-top-544",
    "zone:isl-top-547",
    "zone:isl-top-550",
    "zone:isl-top-570",
    "zone:isl-top-584",
    "zone:isl-top-601",
    "zone:isl-top-604",
    "zone:isl-top-611",
    "zone:isl-top-612",
    "zone:isl-top-615",
    "zone:isl-top-620",
    "zone:isl-top-621",
    "zone:isl-top-623",
    "zone:isl-top-629",
    "zone:isl-top-632",
    "zone:isl-top-637",
    "zone:isl-top-642",
    "zone:isl-top-650",
    "zone:isl-top-652",
    "zone:isl-top-653",
    "zone:isl-top-656",
    "zone:isl-top-658",
    "zone:isl-top-662",
    "zone:isl-top-665",
    "zone:isl-top-671",
    "zone:isl-top-672",
    "zone:isl-top-674",
    "zone:isl-top-688",
    "zone:isl-top-689",
    "zone:isl-top-690",
    "zone:isl-top-691",
    "zone:isl-top-692",
    "zone:isl-top-696",
    "zone:isl-top-699",
    "zone:isl-top-702",
    "zone:isl-top-708",
    "zone:isl-top-714",
    "zone:isl-top-718",
    "zone:isl-top-719",
    "zone:isl-top-721",
    "zone:isl-top-725",
    "zone:isl-top-730",
    "zone:isl-top-731",
    "zone:isl-top-736",
    "zone:isl-top-737",
    "zone:isl-top-744",
    "zone:isl-top-747",
    "zone:isl-top-755",
    "zone:isl-top-763",
    "zone:isl-top-772",
    "zone:isl-top-777",
    "zone:isl-top-791",
    "zone:isl-top-792",
    "zone:isl-top-795",
    "zone:isl-top-796",
    "zone:isl-top-800",
    "zone:isl-top-805",
    "zone:isl-top-814",
    "zone:isl-top-816",
    "zone:isl-top-823",
    "zone:isl-top-829",
    "zone:isl-top-833",
    "zone:isl-top-836",
    "zone:isl-top-855",
    "zone:isl-top-858",
    "zone:isl-top-862",
    "zone:isl-top-867",
    "zone:isl-top-878",
    "zone:isl-top-879",
    "zone:isl-top-888",
    "zone:isl-top-891",
    "zone:isl-top-894",
    "zone:isl-top-895",
    "zone:isl-top-912",
    "zone:isl-top-914",
    "zone:isl-top-921",
    "zone:isl-top-928",
    "zone:isl-top-929",
    "zone:isl-top-937",
    "zone:isl-top-941",
    "zone:isl-top-945",
    "zone:isl-top-948",
    "zone:isl-top-954",
    "zone:isl-top-960",
    "zone:isl-top-968",
    "zone:isl-top-972",
    "zone:isl-top-980",
    "zone:isl-top-983",
    "zone:isl-top-984",
    "zone:isl-top-986",
    "zone:isl-top-991",
    "zone:isl-top-993",
    "zone:isl-top-997",
    "zone:isl-top-1002",
    "zone:isl-top-1003",
    "zone:isl-top-1007",
    "zone:isl-top-1008",
    "zone:isl-top-1011",
    "zone:isl-top-1013",
    "zone:isl-top-1018",
    "zone:isl-top-1032",
    "zone:isl-top-1050",
    "zone:isl-top-1057",
    "zone:isl-top-1058",
    "zone:isl-top-1061",
    "zone:isl-top-1062",
    "zone:isl-top-1064",
    "zone:isl-top-1069",
    "zone:isl-top-1073",
    "zone:isl-top-1076",
    "zone:isl-top-1080",
    "zone:isl-top-1081",
    "zone:isl-top-1084",
    "zone:isl-top-1085",
    "zone:isl-top-1086",
    "zone:isl-top-1091",
    "zone:isl-top-1092",
    "zone:isl-top-1094",
    "zone:isl-top-1095",
    "zone:isl-top-1103",
    "zone:isl-top-1104",
    "zone:isl-top-1106",
    "zone:isl-top-1109",
    "zone:isl-top-1122",
    "zone:isl-top-1126",
    "zone:isl-top-1135",
    "zone:isl-top-1141",
    "zone:isl-top-1147",
    "zone:isl-top-1151",
    "zone:isl-top-1155",
    "zone:isl-top-1157",
    "zone:isl-top-1166",
    "zone:isl-top-1167",
    "zone:isl-top-1168",
    "zone:isl-top-1171",
    "zone:isl-top-1175",
    "zone:isl-top-1177",
    "zone:isl-top-1178",
    "zone:isl-top-1179",
    "zone:isl-top-1186",
    "zone:isl-top-1188",
    "zone:isl-top-1189",
    "zone:isl-top-1198",
    "zone:isl-top-1200",
    "zone:isl-top-1202",
    "zone:isl-top-1203",
    "zone:isl-top-1205",
    "zone:isl-top-1214",
    "zone:isl-top-1215",
    "zone:isl-top-1216",
    "zone:isl-top-1218",
    "zone:isl-top-1220",
    "zone:isl-top-1221",
    "zone:isl-top-1223",
    "zone:isl-top-1224",
    "zone:isl-top-1229",
    "zone:isl-top-1234",
    "zone:isl-top-1241",
    "zone:isl-top-1244",
    "zone:isl-top-1250",
    "zone:isl-top-1252",
    "zone:isl-top-1254",
    "zone:isl-top-1256",
    "zone:isl-top-1257",
    "zone:isl-top-1263",
    "zone:isl-top-1266",
    "zone:isl-top-1267",
    "zone:isl-top-1273",
    "zone:isl-top-1276",
    "zone:isl-top-1284",
    "zone:isl-top-1286",
    "zone:isl-top-1287",
    "zone:isl-top-1290",
    "zone:isl-top-1292",
    "zone:isl-top-1296",
    "zone:isl-top-1302",
    "zone:isl-top-1304",
    "zone:isl-top-1308",
    "zone:isl-top-1309",
    "zone:isl-top-1318",
    "zone:isl-top-1320",
    "zone:isl-top-1321",
    "zone:isl-top-1323",
    "zone:isl-top-1325",
    "zone:isl-top-1326",
    "zone:isl-top-1327",
    "zone:isl-top-1330",
    "zone:isl-top-1336",
    "zone:isl-top-1344",
    "zone:isl-top-1345",
    "zone:isl-top-1346",
    "zone:isl-top-1347",
    "zone:isl-top-1350",
    "zone:isl-top-1353",
    "zone:isl-top-1358",
    "zone:isl-top-1361",
    "zone:isl-top-1366",
    "zone:isl-top-1367",
    "zone:isl-top-1369",
    "zone:isl-top-1371",
    "zone:isl-top-1373",
    "zone:isl-top-1374",
    "zone:isl-top-1378",
    "zone:isl-top-1381",
    "zone:isl-top-1385",
    "zone:isl-top-1399",
    "zone:isl-top-1400",
    "zone:isl-top-1401",
    "zone:isl-top-1402",
    "zone:isl-top-1409",
    "zone:isl-top-1415",
    "zone:isl-top-1417",
    "zone:isl-top-1423",
    "zone:isl-top-1424",
    "zone:isl-top-1426",
    "zone:isl-top-1427",
    "zone:isl-top-1428",
    "zone:isl-top-1430",
    "zone:isl-top-1431",
    "zone:isl-bottom-2",
    "zone:isl-bottom-3",
    "zone:isl-bottom-15",
    "zone:isl-bottom-17",
    "zone:isl-bottom-21",
    "zone:isl-bottom-22",
    "zone:isl-bottom-29",
    "zone:isl-bottom-33",
    "zone:isl-bottom-37",
    "zone:isl-bottom-38",
    "zone:isl-bottom-49",
    "zone:isl-bottom-54",
    "zone:isl-bottom-57",
    "zone:isl-bottom-76",
    "zone:isl-bottom-88",
    "zone:isl-bottom-92",
    "zone:isl-bottom-93",
    "zone:isl-bottom-94",
    "zone:isl-bottom-112",
    "zone:isl-bottom-117",
    "zone:isl-bottom-118",
    "zone:isl-bottom-132",
    "zone:isl-bottom-134",
    "zone:isl-bottom-137",
    "zone:isl-bottom-145",
    "zone:isl-bottom-147",
    "zone:isl-bottom-150",
    "zone:isl-bottom-152",
    "zone:isl-bottom-157",
    "zone:isl-bottom-161",
    "zone:isl-bottom-162",
    "zone:isl-bottom-166",
    "zone:isl-bottom-168",
    "zone:isl-bottom-184",
    "zone:isl-bottom-187",
    "zone:isl-bottom-190",
    "zone:isl-bottom-201",
    "zone:isl-bottom-206",
    "zone:isl-bottom-208",
    "zone:isl-bottom-216",
    "zone:isl-bottom-219",
    "zone:isl-bottom-225",
    "zone:isl-bottom-226",
    "zone:isl-bottom-234",
    "zone:isl-bottom-237",
    "zone:isl-bottom-242",
    "zone:isl-bottom-243",
    "zone:isl-bottom-246",
    "zone:isl-bottom-247",
    "zone:isl-bottom-248",
    "zone:isl-bottom-249",
    "zone:isl-bottom-258",
    "zone:isl-bottom-266",
    "zone:isl-bottom-268",
    "zone:isl-bottom-270",
    "zone:isl-bottom-272",
    "zone:isl-bottom-273",
    "zone:isl-bottom-277",
    "zone:isl-bottom-283",
    "zone:isl-bottom-317",
    "zone:isl-bottom-319",
    "zone:isl-bottom-320",
    "zone:isl-bottom-322",
    "zone:isl-bottom-326",
    "zone:isl-bottom-328",
    "zone:isl-bottom-329",
    "zone:isl-bottom-332",
    "zone:isl-bottom-336",
    "zone:isl-bottom-338",
    "zone:isl-bottom-344",
    "zone:isl-bottom-346",
    "zone:isl-bottom-347",
    "zone:isl-bottom-348",
    "zone:isl-bottom-353",
    "zone:isl-bottom-354",
    "zone:isl-bottom-355",
    "zone:isl-bottom-368",
    "zone:isl-bottom-370",
    "zone:isl-bottom-371",
    "zone:isl-bottom-388",
    "zone:isl-bottom-389",
    "zone:isl-bottom-390",
    "zone:isl-bottom-394",
    "zone:isl-bottom-395",
    "zone:isl-bottom-396",
    "zone:isl-bottom-398",
    "zone:isl-bottom-400",
    "zone:isl-bottom-414",
    "zone:isl-bottom-417",
    "zone:isl-bottom-425",
    "zone:isl-bottom-429",
    "zone:isl-bottom-433",
    "zone:isl-bottom-439",
    "zone:isl-bottom-441",
    "zone:isl-bottom-442",
    "zone:isl-bottom-443",
    "zone:isl-bottom-447",
    "zone:isl-bottom-449",
    "zone:isl-bottom-451",
    "zone:isl-bottom-453",
    "zone:isl-bottom-456",
    "zone:isl-bottom-458",
    "zone:isl-bottom-459",
    "zone:isl-bottom-463",
    "zone:isl-bottom-473",
    "zone:isl-bottom-474",
    "zone:isl-bottom-477",
    "zone:isl-bottom-482",
    "zone:isl-bottom-484",
    "zone:isl-bottom-485",
    "zone:isl-bottom-486",
    "zone:isl-bottom-487",
    "zone:isl-bottom-488",
    "zone:isl-bottom-494",
    "zone:isl-bottom-497",
    "zone:isl-bottom-499",
    "zone:isl-bottom-501",
    "zone:isl-bottom-502",
    "zone:isl-bottom-504",
    "zone:isl-bottom-506",
    "zone:isl-bottom-508",
    "zone:isl-bottom-521",
    "zone:isl-bottom-530",
    "zone:isl-bottom-537",
    "zone:isl-bottom-539",
    "zone:isl-bottom-545",
    "zone:isl-bottom-551",
    "zone:isl-bottom-553",
    "zone:isl-bottom-563",
    "zone:isl-bottom-564",
    "zone:isl-bottom-572",
    "zone:isl-bottom-575",
    "zone:isl-bottom-577",
    "zone:isl-bottom-582",
    "zone:isl-bottom-591",
    "zone:isl-bottom-592",
    "zone:isl-bottom-595",
    "zone:isl-bottom-599",
    "zone:isl-bottom-607",
    "zone:isl-bottom-609",
    "zone:isl-bottom-612",
    "zone:isl-bottom-613",
    "zone:isl-bottom-617",
    "zone:isl-bottom-619",
    "zone:isl-bottom-622",
    "zone:isl-bottom-629",
    "zone:isl-bottom-630",
    "zone:isl-bottom-631",
    "zone:isl-bottom-632",
    "zone:isl-bottom-636",
    "zone:isl-bottom-639",
    "zone:isl-bottom-643",
    "zone:isl-bottom-644",
    "zone:isl-bottom-645",
    "zone:isl-bottom-649",
    "zone:isl-bottom-650",
    "zone:isl-bottom-656",
    "zone:isl-bottom-659",
    "zone:isl-bottom-661",
    "zone:isl-bottom-665",
    "zone:isl-bottom-670",
    "zone:isl-bottom-671",
    "zone:isl-bottom-672",
    "zone:isl-bottom-674",
    "zone:isl-bottom-676",
    "zone:isl-bottom-684",
    "zone:isl-bottom-688",
    "zone:isl-bottom-689",
    "zone:isl-bottom-691",
    "zone:isl-bottom-692",
    "zone:isl-bottom-695",
    "zone:isl-bottom-696",
    "zone:isl-bottom-698",
    "zone:isl-bottom-699",
    "zone:isl-bottom-702",
    "zone:isl-bottom-703",
    "zone:isl-bottom-708",
    "zone:isl-bottom-711",
    "zone:isl-bottom-712",
    "zone:isl-bottom-713",
    "zone:isl-bottom-724",
    "zone:isl-bottom-729",
    "zone:isl-bottom-741",
    "zone:isl-bottom-742",
    "zone:isl-bottom-749",
    "zone:isl-bottom-756",
    "zone:isl-bottom-758",
    "zone:isl-bottom-762",
    "zone:isl-bottom-763",
    "zone:isl-bottom-765",
    "zone:isl-bottom-766",
    "zone:isl-bottom-767",
    "zone:isl-bottom-769",
    "zone:isl-bottom-770",
    "zone:isl-bottom-772",
    "zone:isl-bottom-780",
    "zone:isl-bottom-781",
    "zone:isl-bottom-782",
    "zone:isl-bottom-784",
    "zone:isl-bottom-786",
    "zone:isl-bottom-787",
    "zone:isl-bottom-788",
    "zone:isl-bottom-791",
    "zone:isl-bottom-792",
    "zone:isl-bottom-793",
    "zone:isl-bottom-794",
    "zone:isl-bottom-795",
    "zone:isl-bottom-799",
    "zone:isl-bottom-800",
    "zone:isl-bottom-802",
    "zone:isl-bottom-808",
    "zone:isl-bottom-809",
    "zone:isl-bottom-810",
    "zone:isl-bottom-811",
    "zone:isl-bottom-812",
    "zone:isl-bottom-813",
    "zone:isl-bottom-816",
    "zone:isl-bottom-817",
    "zone:isl-bottom-818"
   ]
  },
  {
   "equipment": "DMM, sharp probe",
   "expected": "continuity to the stated net",
   "generated": true,
   "id": "T-via-nets",
   "ifNot": "correct the via's net or kind in copper.json",
   "method": "Continuity from the via (probe its pad or scrape the tenting at its edge) to the pins of its net",
   "settles": [
    "via:v0"
   ]
  }
 ]
}