AI Flow: Reverse Engineering

{
  "tests": [
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-U2",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "U2"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-U6",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "U6"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-U7",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "U7"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-U8",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "U8"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-Y2",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "Y2"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-Y3",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "Y3"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-Y4",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "Y4"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-Q1",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "Q1"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-Q2",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "Q2"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-Q3",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "Q3"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-Q4",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "Q4"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-Q5",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "Q5"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-L1",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "L1"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-L2",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "L2"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-L3",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "L3"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-L4",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "L4"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-L5",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "L5"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-L6",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "L6"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-L7",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "L7"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-L8",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "L8"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-L9",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "L9"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-L10",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "L10"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-L11",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "L11"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-FID1",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "FID1"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-FID2",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "FID2"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-FID3",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "FID3"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-FID4",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "FID4"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-FID5",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "FID5"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-J3",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "J3"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-J1",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "J1"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-J2",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "J2"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C1",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C1"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C2",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C2"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C3",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C3"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C4",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C4"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C5",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C5"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C6",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C6"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C7",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C7"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C8",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C8"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C9",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C9"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C10",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C10"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C11",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C11"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C12",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C12"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C13",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C13"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C14",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C14"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C15",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C15"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C16",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C16"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C17",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C17"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C18",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C18"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C19",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C19"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C20",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C20"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C21",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C21"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C22",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C22"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C23",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C23"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R2",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R2"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C24",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C24"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C25",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C25"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C26",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C26"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C27",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C27"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C28",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C28"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C29",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C29"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C30",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C30"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C31",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C31"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C32",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C32"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C33",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C33"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C34",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C34"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C35",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C35"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C36",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C36"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C37",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C37"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C38",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C38"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C39",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C39"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C40",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C40"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C41",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C41"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C42",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C42"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C43",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C43"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C44",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C44"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C45",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C45"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C46",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C46"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C47",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C47"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C48",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C48"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C49",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C49"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C50",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C50"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C51",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C51"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C52",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C52"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C53",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C53"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C54",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C54"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C55",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C55"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C56",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C56"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C57",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C57"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C58",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C58"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C59",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C59"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C60",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C60"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C61",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C61"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C62",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C62"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C63",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C63"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C64",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C64"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C65",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C65"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C66",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C66"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C67",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C67"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C68",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C68"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C69",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C69"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C70",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C70"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C71",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C71"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C72",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C72"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C73",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C73"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C74",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C74"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C75",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C75"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C76",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C76"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C77",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C77"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C78",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C78"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C79",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C79"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C80",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C80"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C81",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C81"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C82",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C82"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C83",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C83"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C84",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C84"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C85",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C85"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C86",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C86"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C87",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C87"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C88",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C88"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C89",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C89"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C90",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C90"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C91",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C91"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C92",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C92"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C93",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C93"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C94",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C94"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C95",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C95"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C96",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C96"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C97",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C97"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C98",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C98"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C99",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C99"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C100",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C100"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C101",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C101"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C102",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C102"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C103",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C103"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C104",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C104"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C105",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C105"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C106",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C106"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C107",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C107"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C108",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C108"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C109",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C109"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C110",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C110"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C111",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C111"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C112",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C112"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C113",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C113"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C114",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C114"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C115",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C115"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C116",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C116"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C117",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C117"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C118",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C118"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C119",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C119"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C120",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C120"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C121",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C121"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C122",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C122"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C123",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C123"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C124",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C124"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R3",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R3"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R4",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R4"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R5",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R5"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C125",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C125"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C126",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C126"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C127",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C127"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C128",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C128"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C129",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C129"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C130",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C130"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C131",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C131"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C132",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C132"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R6",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R6"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C133",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C133"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C134",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C134"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C135",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C135"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C136",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C136"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C137",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C137"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C138",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C138"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C139",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C139"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C140",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C140"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C141",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C141"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R7",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R7"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C142",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C142"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C143",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C143"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C144",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C144"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C145",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C145"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C146",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C146"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C147",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C147"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C148",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C148"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C149",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C149"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C150",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C150"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R8",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R8"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R9",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R9"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C151",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C151"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C152",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C152"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C153",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C153"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C154",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C154"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C155",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C155"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C156",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C156"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C157",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C157"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C158",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C158"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C159",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C159"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C160",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C160"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C161",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C161"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R10",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R10"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R11",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R11"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C162",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C162"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C163",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C163"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C164",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C164"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C165",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C165"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R12",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R12"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R13",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R13"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C166",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C166"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C167",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C167"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C168",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C168"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C169",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C169"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C170",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C170"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C171",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C171"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C172",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C172"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C173",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C173"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R14",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R14"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R15",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R15"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R16",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R16"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C174",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C174"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C175",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C175"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R17",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R17"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C176",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C176"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C177",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C177"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C178",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C178"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C179",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C179"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C180",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C180"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C181",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C181"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C182",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C182"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C183",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C183"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C184",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C184"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C185",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C185"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C186",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C186"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C187",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C187"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C188",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C188"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C189",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C189"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C190",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C190"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C191",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C191"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C192",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C192"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C193",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C193"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C194",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C194"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C195",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C195"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C196",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C196"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C197",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C197"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-C198",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "C198"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R18",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R18"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R19",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R19"
      ]
    },
    {
      "equipment": "lamp, loupe or microscope, DMM",
      "expected": "the marking or the measured value",
      "generated": true,
      "id": "T-R20",
      "ifNot": "update the part's value, MPN and footprint in parts.json and rebuild",
      "method": "Read the marking under raking light and magnification; if still unreadable, measure in circuit (resistance, diode test) or identify by pinout continuity",
      "settles": [
        "R20"
      ]
    },
    {
      "equipment": "DMM, microscope",
      "expected": "matches the file",
      "generated": true,
      "id": "T-block-soc",
      "ifNot": "correct the item and rebuild",
      "method": "Inspect against the photos and measure on the board",
      "settles": [
        "block:soc"
      ]
    },
    {
      "equipment": "DMM, microscope",
      "expected": "matches the file",
      "generated": true,
      "id": "T-block-rp1",
      "ifNot": "correct the item and rebuild",
      "method": "Inspect against the photos and measure on the board",
      "settles": [
        "block:rp1"
      ]
    },
    {
      "equipment": "DMM, microscope",
      "expected": "matches the file",
      "generated": true,
      "id": "T-block-ethernet",
      "ifNot": "correct the item and rebuild",
      "method": "Inspect against the photos and measure on the board",
      "settles": [
        "block:ethernet"
      ]
    },
    {
      "equipment": "DMM, microscope",
      "expected": "matches the file",
      "generated": true,
      "id": "T-block-power",
      "ifNot": "correct the item and rebuild",
      "method": "Inspect against the photos and measure on the board",
      "settles": [
        "block:power"
      ]
    },
    {
      "equipment": "DMM, microscope",
      "expected": "matches the file",
      "generated": true,
      "id": "T-block-wireless",
      "ifNot": "correct the item and rebuild",
      "method": "Inspect against the photos and measure on the board",
      "settles": [
        "block:wireless"
      ]
    },
    {
      "equipment": "DMM, microscope",
      "expected": "matches the file",
      "generated": true,
      "id": "T-block-straps",
      "ifNot": "correct the item and rebuild",
      "method": "Inspect against the photos and measure on the board",
      "settles": [
        "block:straps"
      ]
    },
    {
      "equipment": "DMM, microscope",
      "expected": "matches the file",
      "generated": true,
      "id": "T-block-connectors",
      "ifNot": "correct the item and rebuild",
      "method": "Inspect against the photos and measure on the board",
      "settles": [
        "block:connectors"
      ]
    },
    {
      "equipment": "DMM, microscope",
      "expected": "matches the file",
      "generated": true,
      "id": "T-block-mechanical",
      "ifNot": "correct the item and rebuild",
      "method": "Inspect against the photos and measure on the board",
      "settles": [
        "block:mechanical"
      ]
    },
    {
      "equipment": "DMM, microscope",
      "expected": "matches the file",
      "generated": true,
      "id": "T-pour-nets",
      "ifNot": "correct the item and rebuild",
      "method": "Inspect against the photos and measure on the board",
      "settles": [
        "zone:isl-top-1"
      ]
    },
    {
      "equipment": "DMM, sharp probe",
      "expected": "continuity to the stated net",
      "generated": true,
      "id": "T-via-nets",
      "ifNot": "correct the via's net or kind in copper.json",
      "method": "Continuity from the via (probe its pad or scrape the tenting at its edge) to the pins of its net",
      "settles": [
        "via:v0"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GND",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GND"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N001",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N001"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N002",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N002"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N003",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N003"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N004",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N004"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N005",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N005"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N006",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N006"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N007",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N007"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N008",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N008"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N009",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N009"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N010",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N010"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N011",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N011"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N012",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N012"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N013",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N013"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N014",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N014"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N015",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N015"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N016",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N016"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N017",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N017"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N018",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N018"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N019",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N019"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N020",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N020"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N021",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N021"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N022",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N022"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N023",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N023"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N024",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N024"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N025",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N025"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N026",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N026"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N027",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N027"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N028",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N028"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N031",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N031"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N032",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N032"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N033",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N033"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N034",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N034"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N035",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N035"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N036",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N036"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N037",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N037"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N038",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N038"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N039",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N039"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N040",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N040"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N041",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N041"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N042",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N042"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N043",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N043"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N044",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N044"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N045",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N045"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N046",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N046"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N047",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N047"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N048",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N048"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N049",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N049"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N050",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N050"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-N052",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:N052"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-Ethernet_Pair3_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:Ethernet_Pair3_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-Ethernet_Pair1_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:Ethernet_Pair1_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-Ethernet_Pair3_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:Ethernet_Pair3_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-Ethernet_Pair1_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:Ethernet_Pair1_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-Ethernet_Pair2_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:Ethernet_Pair2_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-Ethernet_Pair0_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:Ethernet_Pair0_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-Ethernet_Pair2_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:Ethernet_Pair2_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-Ethernet_Pair0_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:Ethernet_Pair0_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-Ethernet_nLED3",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:Ethernet_nLED3"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-Fan_Tacho",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:Fan_Tacho"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-Ethernet_nLED2",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:Ethernet_nLED2"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-Ethernet_SYNC_OUT",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:Ethernet_SYNC_OUT"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-Fan_PWM",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:Fan_PWM"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-EEPROM_nWP",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:EEPROM_nWP"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-LED_nACT",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:LED_nACT"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO26",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO26"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO21",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO21"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO19",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO19"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO20",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO20"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO13",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO13"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO16",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO16"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO6",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO6"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO12",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO12"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO5",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO5"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-ID_SC",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:ID_SC"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-ID_SD",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:ID_SD"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO7",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO7"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO11",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO11"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO8",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO8"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO9",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO9"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO25",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO25"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO10",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO10"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO24",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO24"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO22",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO22"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO23",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO23"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO27",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO27"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO18",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO18"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO17",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO17"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO15",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO15"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO4",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO4"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO14",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO14"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO3",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO3"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-SD_CLK",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:SD_CLK"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO2",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO2"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-SD_DAT3",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:SD_DAT3"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-SD_CMD",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:SD_CMD"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-SD_DAT0",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:SD_DAT0"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-SD_DAT5",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:SD_DAT5"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-SD_DAT1",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:SD_DAT1"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-SD_DAT4",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:SD_DAT4"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-SD_DAT2",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:SD_DAT2"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-SD_DAT7",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:SD_DAT7"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-SD_DAT6",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:SD_DAT6"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-SD_VDD_OVERRIDE",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:SD_VDD_OVERRIDE"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-SD_PWR_ON",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:SD_PWR_ON"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-VBAT",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:VBAT"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-+5V",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:+5V"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-GPIO_VREF",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:GPIO_VREF"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-SCL0",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:SCL0"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-SDA0",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:SDA0"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-CM5_3.3V",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:CM5_3.3V"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-CM5_1.8V",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:CM5_1.8V"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-WL_nDisable",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:WL_nDisable"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-BT_nDisable",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:BT_nDisable"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-PWR_Button",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:PWR_Button"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-nRPIBOOT",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:nRPIBOOT"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-CC1",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:CC1"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-LED_nPWR",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:LED_nPWR"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-CC2",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:CC2"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-CAM_GPIO0",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:CAM_GPIO0"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-PMIC_Enable",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:PMIC_Enable"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-CAM_GPIO1",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:CAM_GPIO1"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-USB_OTG_ID",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:USB_OTG_ID"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-PCIe_CLK_nREQ",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:PCIe_CLK_nREQ"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-USB_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:USB_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-PCIE_nWAKE",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:PCIE_nWAKE"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-USB_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:USB_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-PCIE_PWR_EN",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:PCIE_PWR_EN"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-PCIe_nRST",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:PCIe_nRST"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-PCIe_CLK_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:PCIe_CLK_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-VBUS_EN",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:VBUS_EN"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-PCIe_CLK_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:PCIe_CLK_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI0_D0_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI0_D0_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-PCIe_RX_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:PCIe_RX_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI0_D0_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI0_D0_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-PCIe_RX_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:PCIe_RX_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI0_D1_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI0_D1_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-PCIe_TX_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:PCIe_TX_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI0_D1_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI0_D1_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-PCIe_TX_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:PCIe_TX_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI0_C_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI0_C_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-USB3-0-RX_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:USB3-0-RX_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI0_C_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI0_C_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-USB3-0-RX_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:USB3-0-RX_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI0_D2_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI0_D2_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-USB3-0-DP",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:USB3-0-DP"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI0_D2_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI0_D2_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-USB3-0-DM",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:USB3-0-DM"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI0_D3_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI0_D3_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-USB3-0-TX_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:USB3-0-TX_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI0_D3_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI0_D3_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-USB3-0-TX_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:USB3-0-TX_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI1_HOTPLUG",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI1_HOTPLUG"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI1_SDA",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI1_SDA"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI1_TX2_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI1_TX2_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI1_SCL",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI1_SCL"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI1_TX2_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI1_TX2_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI1_CEC",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI1_CEC"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI0_CEC",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI0_CEC"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI1_TX1_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI1_TX1_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI0_HOTPLUG",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI0_HOTPLUG"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI1_TX1_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI1_TX1_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-USB3-1-RX_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:USB3-1-RX_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI1_TX0_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI1_TX0_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-USB3-1-RX_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:USB3-1-RX_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI1_TX0_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI1_TX0_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-USB3-1-DP",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:USB3-1-DP"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI1_CLK_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI1_CLK_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-USB3-1-DM",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:USB3-1-DM"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI1_CLK_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI1_CLK_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-USB3-1-TX_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:USB3-1-TX_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI0_TX2_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI0_TX2_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-USB3-1-TX_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:USB3-1-TX_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI0_TX2_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI0_TX2_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI1_D0_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI1_D0_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI0_TX1_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI0_TX1_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI1_D0_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI1_D0_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI0_TX1_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI0_TX1_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI1_D1_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI1_D1_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI0_TX0_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI0_TX0_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI1_D1_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI1_D1_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI0_TX0_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI0_TX0_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI1_C_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI1_C_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI0_CLK_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI0_CLK_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI1_C_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI1_C_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI0_CLK_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI0_CLK_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI1_D2_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI1_D2_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI1_D3_N",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI1_D3_N"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI1_D2_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI1_D2_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-MIPI1_D3_P",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:MIPI1_D3_P"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI0_SDA",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI0_SDA"
      ]
    },
    {
      "equipment": "DMM in continuity mode, fine probes",
      "expected": "every listed pin beeps to the others, and to no pin of another net",
      "generated": true,
      "id": "T-net-HDMI0_SCL",
      "ifNot": "move the pin to the net that beeps, update nets.json and rebuild",
      "method": "Continuity from each pin of this net to the others, board unpowered",
      "settles": [
        "net:HDMI0_SCL"
      ]
    },
    {
      "equipment": "microscope or X-ray, DMM",
      "expected": "the proposed copper layer count, and continuity to the plane's net",
      "generated": true,
      "id": "T-layers",
      "ifNot": "re-propose the stackup and planes in layers.json",
      "method": "Count copper layers on the board edge under a microscope (or X-ray); resistance from a plane via to a pin of the named net",
      "settles": [
        "layers"
      ]
    }
  ]
}