3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAH3781-SA-7
Diodes Incorporated · Hall Sensor · SOT-23
AH3781-SA-7 from Diodes Incorporated, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input; the datasheet specifies an operating supply range of 3.0 V to 28 V, with a 32 V transient absolute maximum rating and a 28 V minimum Zener clamp voltage on the supply. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | OUTPUT | output | Open-drain-style output with an internal pull-up resistor of 10 to 18 kΩ, a 30 to 55 mA output current limit, and an on-state output voltage of 0.4 V maximum at 20 mA; it has a Zener clamp and is switched low when a South pole exceeds BOP. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23 |
| Category | Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output On Voltage | VOUT_ON | 0.2 | 0.4 | V | IOUT = 20mA, B > BOP | 3 | |
| Output Leakage Current | IOUT_OFF | 15 | µA | VOUT = 28V, B < BRP, Output off | 3 | ||
| Supply Current | IDD | 3.8 | 4.9 | mA | Output open, VDD = 12V, TA = +25°C | 3 | |
| Supply Current | IDD | 3.8 | 5.8 | mA | Output open, TA = -40°C to +125°C | 3 | |
| Internal Pull-Up Resistance | RPU | 10 | 14 | 18 | kΩ | TA = -40°C to +125°C | 3 |
| Output Rising Time | tr | 0.2 | 1 | µs | RL = 1kΩ, CL = 20pF | 3 | |
| Output Falling Time | tf | 0.1 | 1 | µs | RL = 1kΩ, CL = 20pF | 3 | |
| Output Current Limit | IOCL | 30 | 55 | mA | B > BOP | 3 | |
| Zener Clamp Voltage | VZ | 28 | V | IDD = 5mA | 3 | ||
| Operation Point (South pole to part marking side) | BOP | 10 | 25 | 40 | Gauss | TA = -40°C to +125°C | 4 |
| Release Point (North pole to part marking side) | BRP | -40 | -25 | -10 | Gauss | TA = -40°C to +125°C | 4 |
| Hysteresis | BHY | 20 | 50 | 80 | Gauss | TA = -40°C to +125°C | 4 |
| Supply Voltage | VDD | 32 | V | 3 | |||
| Reverse Supply Voltage | VDDR | -0.3 | V | 3 | |||
| Output Off Voltage | VOUT_MAX | 32 | V | 3 | |||
| Continuous Output Current | IOUT | 60 | mA | 3 | |||
| Package Power Dissipation (SOT23) | PD | 230 | mW | TA = +25°C (table header) | 3 | ||
| Storage Temperature Range | Ts | -65 | 165 | °C | 3 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| ESD Human Body Model | 6 | kV | 3 | ||||
| Supply Voltage (operating) | VDD | 3 | 28 | V | Operating | 3 | |
| Operating Temperature Range | TA | -40 | 125 | °C | Operating | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | ESD Electrostatic Discharge Withstand Capability - Human Body Model 6 kV Notes: 5. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
AH3781-SA-7 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.025 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ah3781-sa-7-etched.step/ah3781-sa-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ah3781-sa-7.step/ah3781-sa-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (13 pp, sha256
bdceeff6ad6ea818, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).