main
History Download
Ray Publish 0.1.0 5bf0882

AH3574-SA-7

Diodes Incorporated · Magnetic Sensors · SOT-23

AH3574-SA-7 from Diodes Incorporated, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VDD power_in Supply input operating from 3.0 V to 28 V, with a reverse blocking diode and Zener clamp on the supply; the absolute maximum VDD is 32 V, which is a transient stress rating and not an operating condition.
2 GND power_in Ground connection for the device; the datasheet gives no separate electrical limit for this pin.
3 OUTPUT output Single open-drain output that is pulled low when the magnetic flux density exceeds BOP and is held on until B falls below BRP, with an output current limit of 30 to 55 mA (IOCL, B > BOP), a Zener clamp, and an absolute maximum output-off voltage of 32 V.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package SOT-23
Category Sensors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Off Voltage VOUT_MAX 32 V 3
Continuous Output Current IOUT 60 mA 3
Reverse Output Current IOUT_R -50 mA 3
Supply Voltage VDD 32 V 3
Reverse Supply Voltage VDDR -32 V 3
Package Power Dissipation PD 230 mW SOT23 package 3
Storage Temperature Range Ts -65 165 °C 3
Maximum Junction Temperature TJ 150 °C 3
ESD Human Body Model withstand ESD HBM 6 kV HBM 3
Supply Voltage (operating) VDD 3 28 V Operating 3
Operating Temperature Range TA -40 125 °C Operating 3
Output ON Voltage VOUT_ON 0.2 0.4 V IOUT = 20mA, B > BOP 3
Output Leakage Current (when output is off) ILKG 10 µA VOUT = 28V, B < BRP, Output off 3
Supply Current IDD 3 3.5 mA Output Open, TA = +25°C 3
Supply Current IDD 4 mA Output Open, TA = -40°C to +125°C 3
Reverse Battery Current IDD_R -0.01 1 mA VDD = -18V, TA = -40°C to +125°C 3
Reverse Battery Current IDD_R -0.01 1.5 mA VDD = -28V, TA = -40°C to +125°C 3
Output Current Limit IOCL 30 55 mA B > BOP (Note 10) 3
Zener Clamp Voltage VZ 28 V IDD = 5mA 3
Output Rising Time tR 0.2 1 µs RL = 1kΩ, CL = 20pF 3
Output Falling Time tF 0.1 1 µs RL = 1kΩ, CL = 20pF 3
Operate Point South Pole (BOPS) BOPS 20 40 60 Gauss TA = -40°C to +125°C 4
Operate Point North Pole (BOPN) BOPN -60 -40 -20 Gauss TA = -40°C to +125°C 4
Release Point South Pole (BRPS) BRPS 10 25 45 Gauss TA = -40°C to +125°C 4
Release Point North Pole (BRPN) BRPN -45 -25 -10 Gauss TA = -40°C to +125°C 4
Hysteresis (/BOPX/-/BRPX/) BHY 10 15 22 Gauss TA = -40°C to +125°C 4
Device Power-On Time (Start-up Time) tP_ON 10 µs VDD >= 3V, B > BOP (Note 7) 3
Chopping Frequency fC 800 kHz 3
Response Time Delay (time from magnetic threshold reach to start of output rise or fall) tD 3.75 µs (Note 9) 3
Operate Point South Pole (BOPS) BOPS 40 Gauss VDD = 12V, TA = +25°C 4
Operate Point North Pole (BOPN) BOPN -40 Gauss VDD = 12V, TA = +25°C 4
Release Point South Pole (BRPS) BRPS 25 Gauss VDD = 12V, TA = +25°C 4
Release Point North Pole (BRPN) BRPN -25 Gauss VDD = 12V, TA = +25°C 4
Hysteresis (/BOPX/-/BRPX/) BHY 15 Gauss VDD = 12V, TA = +25°C 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing Abs ESD HBM Electros Static Discharge Withstand - Human Body Model (HBM) 6 kV Notes: 5. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: AH3574-SA-7
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.025 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ah3574-sa-7-etched.step / ah3574-sa-7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ah3574-sa-7.step / ah3574-sa-7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (13 pp, sha256 3ff4b7904a4ff67d, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF