component
AFC10-S09PCA-00
Public Made by Adomby adom
JUSHUO Wire To Board Connector, SMD,P=1mm. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 4d ago |
| viewers | 11h ago |
| afc10-s09pca-00-hero.glb | 4d ago |
| afc10-s09pca-00-hero.overlay.json | 4d ago |
| afc10-s09pca-00.glb | 4d ago |
| afc10-s09pca-00.kicad_mod | 4d ago |
| afc10-s09pca-00.kicad_sym | 4d ago |
| afc10-s09pca-00.lbr | 4d ago |
| afc10-s09pca-00.step | 4d ago |
| package.json | 11h ago |
| page.json | 11h ago |
| README.md | 4d ago |
| verification.json | 4d ago |
AFC10-S09PCA-00
JUSHUO · Wire To Board Connector · JST_SH_BM09B-SRSS-TB_1x09-1MP_P1.00mm_Vertical
AFC10-S09PCA-00 from JUSHUO, in a JST_SH_BM09B-SRSS-TB_1x09-1MP_P1.00mm_Vertical. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Contact 1; numbering follows the footprint. |
| 2 | 2 | passive | Contact 2; numbering follows the footprint. |
| 3 | 3 | passive | Contact 3; numbering follows the footprint. |
| 4 | 4 | passive | Contact 4; numbering follows the footprint. |
| 5 | 5 | passive | Contact 5; numbering follows the footprint. |
| 6 | 6 | passive | Contact 6; numbering follows the footprint. |
| 7 | 7 | passive | Contact 7; numbering follows the footprint. |
| 8 | 8 | passive | Contact 8; numbering follows the footprint. |
| 9 | 9 | passive | Contact 9; numbering follows the footprint. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JUSHUO |
| Package | JST_SH_BM09B-SRSS-TB_1x09-1MP_P1.00mm_Vertical |
| Category | Connectors |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Contact resistance (initial) | 20 | mΩ | Mated connector, contact resistance meter across the two terminals | 5 | |||
| Insulation resistance (initial) | 100 | MΩ | 500 V DC for 1 min, between adjacent contacts and contacts to enclosure | 5 | |||
| Rated voltage | 50 | V | Standard rating | 4 | |||
| Rated current | 0.5 | A | AC/DC | 4 | |||
| Operating temperature range | -25 | 105 | °C | 4 | |||
| Operating humidity range | 90 | %RH | Relative humidity below 90% | 4 | |||
| Storage temperature | -20 | 50 | °C | Packed connector, relative humidity not more than 90%, no acid/alkaline/corrosive gas | 4 | ||
| Transport temperature | -20 | 50 | °C | Ambient temperature during transportation | 4 | ||
| Contact resistance after heat test | 30 | mΩ | +105 °C ±2 °C for 96 h, then 1-2 h at normal ambient | 5 | |||
| Contact resistance after cold test | 30 | mΩ | -25 °C ±2 °C for 96 h, then 1-2 h at normal ambient | 5 | |||
| Insulation resistance after moisture test | 50 | MΩ | 40 °C ±2 °C, 90-96% RH, 96 h | 5 | |||
| Contact resistance after temperature cycle | 30 | mΩ | -25 °C and +105 °C steps, 5 cycles, then 2 h recovery | 6 | |||
| Contact resistance after salt spray | 30 | mΩ | 5% NaCl spray, 24 h, then 1-2 h recovery | 6 | |||
| Solder tin coverage | 95 | % | Dipped in 235 ±5 °C tin solution for 2.5 ±0.5 s | 7 | |||
| Single pin retention force (pin in housing) | 7 | N | Pin pulled from pin holder at 25 ±3 mm/min | 8 | |||
| Single terminal retention force in plastic housing | 5 | N | Terminal pulled from housing at 25 ±3 mm/min | 8 | |||
| Contact resistance after mechanical life | 30 | mΩ | Unpowered, 50 mate/unmate cycles at 10 cycles/min | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | LCP | 基座 base 1.0 LCP E130i | 4 |
CAD (KiCad official)
- Symbol:
AFC10-S09PCA-00 - Footprint:
Connector_JST:JST_SH_BM09B-SRSS-TB_1x09-1MP_P1.00mm_Vertical - 3D model: JST_SH_BM09B-SRSS-TB_1x09-1MP_P1.00mm_Vertical (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JUSHUO datasheet (10 pp, sha256 ``, retrieved 2026-11-06, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primaryconnector numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).