component
AF1206F15.0TM
Public Made by Adomby adom
AEM Disposable Fuses, 1206. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAF1206F15.0TM
AEM · Disposable Fuses · 1206
AF1206F15.0TM from AEM, in a 1206. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Fuse terminal 1 (copper termination, nickel and tin plated); non-polarized, rated 15.0 A, 32 VDC, 50A@32VDC interrupting rating, nominal DCR 0.0035 ohm. |
| 2 | 2 | passive | Fuse terminal 2 (copper termination, nickel and tin plated); non-polarized and interchangeable with terminal 1, nominal I2t 24.5 A2s. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AEM |
| Package | 1206 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Clearing time at 100% of current rating, 25°C | 4 | hour | 100% of current rating, 25°C | 1 | |||
| Clearing time at 250% of current rating, 25°C | 5 | seconds | 250% of current rating, 25°C | 1 | |||
| Operating temperature range | -55 | 125 | °C | With derating | 1 | ||
| Voltage rating | 32 | VDC | As printed for the 5.00 A row onward; applied to 15.0 A part (see review) | 2 | |||
| Interrupting rating | 50 | A | 50A@32VDC | 2 | |||
| Current rating | 15 | A | Marking Y | 2 | |||
| Nominal DCR | DCR | 0.0035 | Ω | Measured at ≤10% of rated current and 25°C ambient | 2 | ||
| Nominal I2t | I2t | 24.5 | A2s | Calculated at 0.001 second pre-arcing time | 2 | ||
| Life: voltage drop change | -20 | 20 | % | 25°C, 2000 hours, 80% rated current (75% for <1 A) | 6 | ||
| Reflow & Bend: DCR change | 20 | % | 3 reflows at 245°C followed by 2 mm bend; 10% max for ≤1 A | 6 | |||
| Soldering heat resistance: DCR change | 20 | % | 260°C, 10 seconds; 10% max for ≤1 A | 6 | |||
| Thermal shock: DCR change | 10 | % | -65°C to +125°C, 100 cycles | 6 | |||
| Mechanical vibration: DCR change | 10 | % | 5-3000 Hz, 0.4 inch double amplitude or 30 G peak | 6 | |||
| Mechanical shock: DCR change | 10 | % | 1500 G, 0.5 milliseconds, half-sine shocks | 6 | |||
| Salt spray: DCR change | 10 | % | 5% salt solution, 48 hour exposure | 6 | |||
| Moisture resistance: DCR change | 15 | % | 10 cycles | 6 | |||
| Solderability: new solder coverage | 90 | % | 245°C, 5 seconds | 6 | |||
| Storage ambient temperature | 35 | °C | Packaging storage; higher storage temperatures could deform packaging | 5 | |||
| Storage relative humidity | 75 | % | Recommended maximum for storage | 5 | |||
| Preheat/soak temperature | Tsmin to Tsmax | 150 | 200 | °C | Pb-free assembly | 7 | |
| Preheat/soak time | ts | 60 | 120 | seconds | Tsmin to Tsmax | 7 | |
| Ramp-up rate (TL to Tp) | 3 | °C/second | Maximum | 7 | |||
| Ramp-down rate (Tp to TL) | 6 | °C/second | Maximum | 7 | |||
| Time 25°C to peak temperature | 8 | minutes | Maximum | 7 | |||
| Liquidous temperature | TL | 217 | °C | Reflow profile | 7 | ||
| Time maintained above TL | tL | 60 | 150 | seconds | Above TL | 7 | |
| Peak package body temperature | Tp | 260 | °C | Pb-free reflow profile | 7 | ||
| Time within 5°C of classification temperature | tp | 30 | seconds | Within 5°C of Tc; supplier minimum / user maximum tolerance on Tp | 7 |
CAD (KiCad official)
- Symbol:
AF1206F15.0TM - Footprint:
Fuse:Fuse_1206_3216Metric - 3D model: 1206 (KiCad packages3D, STEP)
- 3D model files:
af1206f15-0tm-etched.step/af1206f15-0tm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);af1206f15-0tm.step/af1206f15-0tm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AEM datasheet (8 pp, sha256
d0607b60fdbd0072, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).