component
ADXL1002BCPZ-RL7
Public Made by Adomby adom
Analog Devices Accelerometers, LFCSP-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+69@@ -0,0 +1,69 @@+# ADXL1002BCPZ-RL7++**Analog Devices** · Accelerometers · LFCSP-32(5x5)++ADXL1002BCPZ-RL7 from Analog Devices, in a LFCSP-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NIC | unconnected | Not internally connected. |+| 2 | NIC | unconnected | Not internally connected. |+| 3 | NIC | unconnected | Not internally connected. |+| 4 | NIC | unconnected | Not internally connected. |+| 5 | NIC | unconnected | Not internally connected. |+| 6 | NIC | unconnected | Not internally connected. |+| 7 | NIC | unconnected | Not internally connected. |+| 8 | NIC | unconnected | Not internally connected. |+| 9 | NIC | unconnected | Not internally connected. |+| 10 | DNC | unconnected | Do not connect; leave unconnected. |+| 11 | DNC | unconnected | Do not connect; leave unconnected. |+| 12 | VDD | power_in | Supply voltage input, 3.3 V to 5.25 V. |+| 13 | VSS | power_in | Supply ground. |+| 14 | VSS | power_in | Supply ground. |+| 15 | STANDBY | input | Standby mode input, active high; input level high VDD × 0.7, input level low VDD × 0.3. |+| 16 | ST | input | Self test input, active high; input level high VDD × 0.7, input level low VDD × 0.3. |+| 17 | DNC | unconnected | Do not connect; leave unconnected. |+| 18 | DNC | unconnected | Do not connect; leave unconnected. |+| 19 | DNC | unconnected | Do not connect; leave unconnected. |+| 20 | OR | output | Overrange output; instantaneously indicates when overrange detection circuit identifies significant overrange activity greater than approximately 2× full-scale range; not latched. |+| 21 | DNC | unconnected | Do not connect; leave unconnected. |+| 22 | DNC | unconnected | Do not connect; leave unconnected. |+| 23 | DNC | unconnected | Do not connect; leave unconnected. |+| 24 | DNC | unconnected | Do not connect; leave unconnected. |+| 25 | DNC | unconnected | Do not connect; leave unconnected. |+| 26 | DNC | unconnected | Do not connect; leave unconnected. |+| 27 | VSS | power_in | Supply ground. |+| 28 | VSS | power_in | Supply ground. |+| 29 | DNC | unconnected | Do not connect; leave unconnected. |+| 30 | VOUT | output | Analog output voltage; output impedance less than 0.1 Ω, short-circuit current 3 mA, maximum resistive load 20 MΩ, maximum capacitive load 100 pF without external resistor or 22 nF with 8 kΩ series resistor. |+| 31 | NIC | unconnected | Not internally connected. |+| 32 | NIC | unconnected | Not internally connected. |+| 33 | EPAD | power_in | Exposed pad on bottom of package; must be connected to ground. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Analog Devices |+| Package | LFCSP-32(5x5) |+| Category | Sensors |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `ADXL1002BCPZ-RL7`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: LFCSP-32(5x5) (KiCad packages3D, STEP)+- 3D model files: `adxl1002bcpz-rl7-etched.step` / `adxl1002bcpz-rl7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `adxl1002bcpz-rl7.step` / `adxl1002bcpz-rl7.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588916088847675393) (14 pp, sha256 `a6acf5536be36b98`, retrieved 2026-09-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/adxl1002bcpz-rl7-datasheet.pdf)
page.jsonadded+291@@ -0,0 +1,291 @@+{+ "slug": "adxl1002bcpz-rl7",+ "version": "0.1.0",+ "type": "component",+ "description": "Analog Devices Accelerometers, LFCSP-32(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "sensors",+ "adxl1002bcpz-rl7",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "adxl1002bcpz-rl7.kicad_sym",+ "adxl1002bcpz-rl7.kicad_mod",+ "adxl1002bcpz-rl7.glb",+ "adxl1002bcpz-rl7.step",+ "adxl1002bcpz-rl7.lbr",+ "docs/hero.png",+ "docs/adxl1002bcpz-rl7-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "ADXL1002BCPZ-RL7",+ "manufacturer": "Analog Devices",+ "package": "LFCSP-32(5x5)",+ "pin_count": 33,+ "category": "Sensors",+ "subcategory": "Accelerometers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588916088847675393",+ "parts": {+ "symbol": "adxl1002bcpz-rl7.kicad_sym",+ "footprint": "adxl1002bcpz-rl7.kicad_mod",+ "model_3d": "adxl1002bcpz-rl7-etched.glb",+ "model_3d_plain": "adxl1002bcpz-rl7.glb",+ "model_3d_step": "adxl1002bcpz-rl7-etched.step",+ "model_3d_step_plain": "adxl1002bcpz-rl7.step",+ "lbr": "adxl1002bcpz-rl7.lbr"+ },+ "distributor_links": {+ "lcsc": "C662288"+ },+ "pins": [+ {+ "number": "1",+ "name": "NIC",+ "type": "unconnected",+ "description": "Not internally connected."+ },+ {+ "number": "2",+ "name": "NIC",+ "type": "unconnected",+ "description": "Not internally connected."+ },+ {+ "number": "3",+ "name": "NIC",+ "type": "unconnected",+ "description": "Not internally connected."+ },+ {+ "number": "4",+ "name": "NIC",+ "type": "unconnected",+ "description": "Not internally connected."+ },+ {+ "number": "5",+ "name": "NIC",+ "type": "unconnected",+ "description": "Not internally connected."+ },+ {+ "number": "6",+ "name": "NIC",+ "type": "unconnected",+ "description": "Not internally connected."+ },+ {+ "number": "7",+ "name": "NIC",+ "type": "unconnected",+ "description": "Not internally connected."+ },+ {+ "number": "8",+ "name": "NIC",+ "type": "unconnected",+ "description": "Not internally connected."+ },+ {+ "number": "9",+ "name": "NIC",+ "type": "unconnected",+ "description": "Not internally connected."+ },+ {+ "number": "10",+ "name": "DNC",+ "type": "unconnected",+ "description": "Do not connect; leave unconnected."+ },+ {+ "number": "11",+ "name": "DNC",+ "type": "unconnected",+ "description": "Do not connect; leave unconnected."+ },+ {+ "number": "12",+ "name": "VDD",+ "type": "power_in",+ "description": "Supply voltage input, 3.3 V to 5.25 V."+ },+ {+ "number": "13",+ "name": "VSS",+ "type": "power_in",+ "description": "Supply ground."+ },+ {+ "number": "14",+ "name": "VSS",+ "type": "power_in",+ "description": "Supply ground."+ },+ {+ "number": "15",+ "name": "STANDBY",+ "type": "input",+ "description": "Standby mode input, active high; input level high VDD × 0.7, input level low VDD × 0.3."+ },+ {+ "number": "16",+ "name": "ST",+ "type": "input",+ "description": "Self test input, active high; input level high VDD × 0.7, input level low VDD × 0.3."+ },+ {+ "number": "17",+ "name": "DNC",+ "type": "unconnected",+ "description": "Do not connect; leave unconnected."+ },+ {+ "number": "18",+ "name": "DNC",+ "type": "unconnected",+ "description": "Do not connect; leave unconnected."+ },+ {+ "number": "19",+ "name": "DNC",+ "type": "unconnected",+ "description": "Do not connect; leave unconnected."+ },+ {+ "number": "20",+ "name": "OR",+ "type": "output",+ "description": "Overrange output; instantaneously indicates when overrange detection circuit identifies significant overrange activity greater than approximately 2× full-scale range; not latched."+ },+ {+ "number": "21",+ "name": "DNC",+ "type": "unconnected",+ "description": "Do not connect; leave unconnected."+ },+ {+ "number": "22",+ "name": "DNC",+ "type": "unconnected",+ "description": "Do not connect; leave unconnected."+ },+ {+ "number": "23",+ "name": "DNC",+ "type": "unconnected",+ "description": "Do not connect; leave unconnected."+ },+ {+ "number": "24",+ "name": "DNC",+ "type": "unconnected",+ "description": "Do not connect; leave unconnected."+ },+ {+ "number": "25",+ "name": "DNC",+ "type": "unconnected",+ "description": "Do not connect; leave unconnected."+ },+ {+ "number": "26",+ "name": "DNC",+ "type": "unconnected",+ "description": "Do not connect; leave unconnected."+ },+ {+ "number": "27",+ "name": "VSS",+ "type": "power_in",+ "description": "Supply ground."+ },+ {+ "number": "28",+ "name": "VSS",+ "type": "power_in",+ "description": "Supply ground."+ },+ {+ "number": "29",+ "name": "DNC",+ "type": "unconnected",+ "description": "Do not connect; leave unconnected."+ },+ {+ "number": "30",+ "name": "VOUT",+ "type": "output",+ "description": "Analog output voltage; output impedance less than 0.1 Ω, short-circuit current 3 mA, maximum resistive load 20 MΩ, maximum capacitive load 100 pF without external resistor or 22 nF with 8 kΩ series resistor."+ },+ {+ "number": "31",+ "name": "NIC",+ "type": "unconnected",+ "description": "Not internally connected."+ },+ {+ "number": "32",+ "name": "NIC",+ "type": "unconnected",+ "description": "Not internally connected."+ },+ {+ "number": "33",+ "name": "EPAD",+ "type": "power_in",+ "description": "Exposed pad on bottom of package; must be connected to ground."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 14,+ "cost_usd": 0.294,+ "at": "2026-09-21T18:35:27"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588916088847675393",+ "pages": 14,+ "sha256": "a6acf5536be36b98",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 33,+ "described": 33,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}