component
ADXL1002BCPZ-RL7
Public Made by Adomby adom
Analog Devices Accelerometers, LFCSP-32(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADXL1002BCPZ-RL7
Analog Devices · Accelerometers · LFCSP-32(5x5)
ADXL1002BCPZ-RL7 from Analog Devices, in a LFCSP-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NIC | unconnected | Not internally connected. |
| 2 | NIC | unconnected | Not internally connected. |
| 3 | NIC | unconnected | Not internally connected. |
| 4 | NIC | unconnected | Not internally connected. |
| 5 | NIC | unconnected | Not internally connected. |
| 6 | NIC | unconnected | Not internally connected. |
| 7 | NIC | unconnected | Not internally connected. |
| 8 | NIC | unconnected | Not internally connected. |
| 9 | NIC | unconnected | Not internally connected. |
| 10 | DNC | unconnected | Do not connect; leave unconnected. |
| 11 | DNC | unconnected | Do not connect; leave unconnected. |
| 12 | VDD | power_in | Supply voltage input, 3.3 V to 5.25 V. |
| 13 | VSS | power_in | Supply ground. |
| 14 | VSS | power_in | Supply ground. |
| 15 | STANDBY | input | Standby mode input, active high; input level high VDD × 0.7, input level low VDD × 0.3. |
| 16 | ST | input | Self test input, active high; input level high VDD × 0.7, input level low VDD × 0.3. |
| 17 | DNC | unconnected | Do not connect; leave unconnected. |
| 18 | DNC | unconnected | Do not connect; leave unconnected. |
| 19 | DNC | unconnected | Do not connect; leave unconnected. |
| 20 | OR | output | Overrange output; instantaneously indicates when overrange detection circuit identifies significant overrange activity greater than approximately 2× full-scale range; not latched. |
| 21 | DNC | unconnected | Do not connect; leave unconnected. |
| 22 | DNC | unconnected | Do not connect; leave unconnected. |
| 23 | DNC | unconnected | Do not connect; leave unconnected. |
| 24 | DNC | unconnected | Do not connect; leave unconnected. |
| 25 | DNC | unconnected | Do not connect; leave unconnected. |
| 26 | DNC | unconnected | Do not connect; leave unconnected. |
| 27 | VSS | power_in | Supply ground. |
| 28 | VSS | power_in | Supply ground. |
| 29 | DNC | unconnected | Do not connect; leave unconnected. |
| 30 | VOUT | output | Analog output voltage; output impedance less than 0.1 Ω, short-circuit current 3 mA, maximum resistive load 20 MΩ, maximum capacitive load 100 pF without external resistor or 22 nF with 8 kΩ series resistor. |
| 31 | NIC | unconnected | Not internally connected. |
| 32 | NIC | unconnected | Not internally connected. |
| 33 | EPAD | power_in | Exposed pad on bottom of package; must be connected to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LFCSP-32(5x5) |
| Category | Sensors |
| Pins | 33 |
CAD (KiCad official)
- Symbol:
ADXL1002BCPZ-RL7 - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: LFCSP-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
adxl1002bcpz-rl7-etched.step/adxl1002bcpz-rl7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adxl1002bcpz-rl7.step/adxl1002bcpz-rl7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
a6acf5536be36b98, retrieved 2026-09-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).