ADX111QAMSOP10

{
  "slug": "adx111qamsop10",
  "version": "0.1.0",
  "type": "component",
  "description": "analogysemi Analog To Digital Converters (ADC), MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data acquisition",
    "adx111qamsop10",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adx111qamsop10.kicad_sym",
    "adx111qamsop10.kicad_mod",
    "adx111qamsop10.glb",
    "adx111qamsop10.step",
    "adx111qamsop10.lbr",
    "docs/hero.png",
    "docs/adx111qamsop10-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adx111qamsop10-hero.glb",
    "adx111qamsop10-hero.overlay.json",
    "adx111qamsop10-etched.glb"
  ],
  "component": {
    "mpn": "ADX111QAMSOP10",
    "manufacturer": "analogysemi",
    "package": "MSOP-10",
    "pin_count": 10,
    "category": "Data Acquisition",
    "subcategory": "Analog To Digital Converters (ADC)",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603062999310102528",
    "parts": {
      "symbol": "adx111qamsop10.kicad_sym",
      "footprint": "adx111qamsop10.kicad_mod",
      "model_3d": "adx111qamsop10-hero.glb",
      "model_3d_plain": "adx111qamsop10-etched.glb",
      "model_3d_step": "adx111qamsop10-etched.step",
      "model_3d_step_plain": "adx111qamsop10.step",
      "lbr": "adx111qamsop10.lbr"
    },
    "distributor_links": {
      "lcsc": "C6807536"
    },
    "distributor_check": {
      "checked_at": "2026-10-20T23:55:54Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ADDR",
        "type": "input",
        "description": "I2C slave address select pin, connected to GND, VDD, SDA or SCL to choose one of four addresses (1001000, 1001001, 1001010, 1001011), and its state is sampled continuously."
      },
      {
        "number": "2",
        "name": "ALERT/RDY",
        "type": "output",
        "description": "Open-drain comparator output or conversion-ready output that requires a pull-up resistor to VDD, and may be left floating or weakly pulled up if unused."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "4",
        "name": "AIN0",
        "type": "passive",
        "description": "Analog input 0, which must be kept within GND - 0.3 V to VDD + 0.3 V to avoid forward-biasing the ESD diodes."
      },
      {
        "number": "5",
        "name": "AIN1",
        "type": "passive",
        "description": "Analog input 1, which must be kept within GND - 0.3 V to VDD + 0.3 V to avoid forward-biasing the ESD diodes."
      },
      {
        "number": "6",
        "name": "AIN2",
        "type": "passive",
        "description": "Analog input 2, which must be kept within GND - 0.3 V to VDD + 0.3 V to avoid forward-biasing the ESD diodes."
      },
      {
        "number": "7",
        "name": "AIN3",
        "type": "passive",
        "description": "Analog input 3, which must be kept within GND - 0.3 V to VDD + 0.3 V to avoid forward-biasing the ESD diodes."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply, which must be decoupled to GND with a 0.1 µF capacitor."
      },
      {
        "number": "9",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial data line that transmits and receives data, and requires an external pull-up resistor because the I2C driver is open-drain."
      },
      {
        "number": "10",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input that locks data on SDA, and the device never drives this line low (no clock stretching)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet pin table (Table 3) gives names, positions and descriptions, but the MSOP-10 Figure 1 ; KiCad type mapping is an interpretation: AIN0-AIN3 are analog inputs mapped to 'passive'; ALERT/RDY "
        ],
        "pages_sent": 24,
        "cost_usd": 0.016,
        "at": "2026-10-20T23:52:32"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603062999310102528",
        "pages": 39,
        "sha256": "433863d98d6f473e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adx111qamsop10.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adx111qamsop10-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f5d68ed7d74fc6be0129cdfda9a8695964c0b1ef43bff0944a188b08fd1b2c16",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}