main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers adum6401crwz: viewers rendered from the public page · Ray
adum6401crwz-etched.glb Publish 0.1.0 · Ray
adum6401crwz-etched.step adum6401crwz: factory component page (tier=mfr) · Ray
adum6401crwz-hero.glb adum6401crwz: hero GLB from the etched model (keeps the MPN mark) · Ray
adum6401crwz-hero.overlay.json adum6401crwz: hero GLB from the etched model (keeps the MPN mark) · Ray
adum6401crwz.glb Publish 0.1.0 · Ray
adum6401crwz.kicad_mod Publish 0.1.0 · Ray
adum6401crwz.kicad_sym Publish 0.1.0 · Ray
adum6401crwz.lbr Publish 0.1.0 · Ray
adum6401crwz.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

ADUM6401CRWZ

Analog Devices · Digital Isolators · SOIC-16-300mil

ADUM6401CRWZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Primary supply voltage, 3.0 V to 5.5 V; pin 1 and pin 7 must be connected to the same external voltage source.
2 GND1 power_in Ground reference for the primary side of the isolator; pin 2 and pin 8 are internally connected and should both be tied to a common ground.
3 VIA input Logic Input A.
4 VIB input Logic Input B.
5 VIC input Logic Input C.
6 VOD output Logic Output D.
7 VDDL power_in Data channel supply voltage, 3.0 V to 5.5 V; pin 1 and pin 7 must be connected to the same external voltage source.
8 GND1 power_in Ground reference for the primary side of the isolator; internally connected to pin 2 and should be tied to a common ground.
9 GNDISO power_in Ground reference for the secondary side of the isolator; pin 9 and pin 15 are internally connected and should both be tied to a common ground.
10 VSEL input Output voltage selection: when VSEL = VISO the VISO setpoint is 5.0 V, and when VSEL = GNDISO the VISO setpoint is 3.3 V.
11 VID input Logic Input D.
12 VOC output Logic Output C.
13 VOB output Logic Output B.
14 VOA output Logic Output A.
15 GNDISO power_in Ground reference for the secondary side of the isolator; internally connected to pin 9 and should be tied to a common ground.
16 VISO power_out Secondary supply voltage output for external loads: 3.3 V (VSEL = GNDISO) or 5.0 V (VSEL = VISO).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-16-300mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Setpoint VISO 4.7 5 5.4 V IISO = 0 mA 3
Line Regulation VISO(LINE) 1 mV/V IISO = 40 mA, VDD1 = 4.5 V to 5.5 V 3
Load Regulation VISO(LOAD) 1 5 % IISO = 8 mA to 72 mA 3
Output Ripple VISO(RIP) 75 mV p-p 20 MHz bandwidth, CBO = 0.1 μF//10 μF, IISO = 72 mA 3
Output Noise VISO(NOISE) 200 mV p-p CBO = 0.1 μF//10 μF, IISO = 72 mA 3
Output Supply Current IISO(MAX) 80 mA VISO > 4.5 V 3
IDD1, No VISO Load IDD1(Q) 13 35 mA 3
IDD1, Full VISO Load IDD1(MAX) 290 mA 3
Propagation Delay (C grade) tPHL, tPLH 45 60 ns 50% input to 50% output 4
Pulse Width Distortion (C grade) PWD 6 ns /tPLH − tPHL/ 4
Pulse Width (C grade) PW 40 ns Within PWD limit 4
Propagation Delay Skew (C grade) tPSK 15 ns Between any two units 4
Channel Matching Codirectional (C grade) tPSKCD 6 ns 4
Channel Matching Opposing Directional (C grade) tPSKOD 15 ns 4
Logic Low Output Voltage VOL 0 0.1 V IOx = 20 μA, VIx = VIxL 4
Logic Low Output Voltage VOL 0.2 0.4 V IOx = 4 mA, VIx = VIxL 4
Input Currents per Channel II -20 0.01 20 μA 0 V ≤ VIx ≤ VDDx 4
Output Rise/Fall Time tR/tF 2.5 ns 10% to 90% 4
Common-Mode Transient Immunity /CM/ 25 35 kV/μs VIx = VDD1 or VISO, VCM = 1000 V, transient magnitude = 800 V 4
Operating Temperature TA -40 105 °C Operation at 105°C requires reduction of the maximum load current as specified in Table 19 10
Supply Voltage VDD1 @ VSEL = GNDISO VDD1 3 5.5 V Each voltage is relative to its respective ground 10
Supply Voltage VDD1 @ VSEL = VISO VDD1 4.5 5.5 V 10
Storage Temperature Range TST -55 150 °C 11
Ambient Operating Temperature Range TA -40 105 °C 11
Supply Voltages (VDD1, VDDL, VISO) VDD1, VDDL, VISO -0.5 7 V Each voltage is relative to its respective ground 11
Input Voltage (VIA, VIB, VIC, VID, VSEL) -0.5 V Upper limit printed as VDDI + 0.5 V (see footnote 2) 11
Output Voltage (VOA, VOB, VOC, VOD) -0.5 V Upper limit printed as VDDO + 0.5 V (see footnote 2) 11
Average Output Current per Pin -10 10 mA 11
Common-Mode Transients -100 100 kV/μs 11
Efficiency at IISO(MAX) 34 % IISO = 80 mA 3
IC Junction-to-Ambient Thermal Resistance θJA 45 °C/W Thermocouple is located at the center of the package underside; test conducted on a 4-layer board with thin traces 8
Thermal Shutdown Threshold TSSD 150 °C TJ rising 8
Thermal Shutdown Hysteresis TSSD-HYS 20 °C 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing pC by applying an insulation test voltage ≥ 1590 V peak for 1 sec (partial discharge detection limit = 5 pC). The asterisk (*) marking branded on the component designates 9

CAD (KiCad official)

  • Symbol: ADUM6401CRWZ
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: adum6401crwz-etched.step / adum6401crwz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adum6401crwz.step / adum6401crwz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (28 pp, sha256 8c375eba306bd90a, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF