main
Ray
Publish 0.1.0
abbbf9f
ADUM6000ARWZ
Analog Devices · DC-DC Converters · SOIC-16-300mil
ADUM6000ARWZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Primary supply voltage, 3.0 V to 5.5 V; pins 1 and 7 are internally connected and both should be externally connected to a common power source. |
| 2 | GND1 | power_in | Ground reference for the primary side of the converter; pins 2 and 8 are internally connected and should both be connected to a common ground. |
| 3 | NC | unconnected | No internal connection. |
| 4 | RCIN | input | Regulation control input that must be tied low or driven by a master RCOUT (slave mode, RCSEL low) to disable or regulate the converter; it is weakly pulled low and must not be tied high when RCSEL is low. |
| 5 | RCOUT | output | Regulation control output in master configuration (RCSEL high), connected to the RCIN pin of a slave isoPower device. |
| 6 | RCSEL | input | Selects standalone/master mode (RCSEL high) or slave mode (RCSEL low); weakly pulled high and should be tied high or low in noisy environments. |
| 7 | VDD1 | power_in | Primary supply voltage, 3.0 V to 5.5 V; internally connected to pin 1 and should be externally connected to the same common power source. |
| 8 | GND1 | power_in | Ground reference for the primary side of the converter; internally connected to pin 2 and should be connected to a common ground. |
| 9 | GNDISO | power_in | Ground reference for the secondary side of the converter; pins 9 and 15 are internally connected and should share a common ground. |
| 10 | VISO | power_out | Secondary supply voltage output for external loads, 3.3 V (VSEL low) or 5.0 V (VSEL high); pins 10 and 16 are internally connected and should both be externally connected. |
| 11 | NC | unconnected | No internal connection. |
| 12 | NC | unconnected | No internal connection. |
| 13 | VSEL | input | Output voltage selection: VSEL = VISO sets VISO to 5.0 V and VSEL = GNDISO sets VISO to 3.3 V; weakly pulled high and has no function in slave mode. |
| 14 | NC | unconnected | No internal connection. |
| 15 | GNDISO | power_in | Ground reference for the secondary side of the converter; internally connected to pin 9 and should share a common ground. |
| 16 | VISO | power_out | Secondary supply voltage output for external loads, 3.3 V (VSEL low) or 5.0 V (VSEL high); internally connected to pin 10 and should be externally connected to it. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-16-300mil |
| Category | Power Supply Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Temperature (recommended) | TA | -40 | 105 | °C | Operation at 105°C requires reduction of the maximum load current, as specified in Table 10 | 7 | |
| Primary supply VDD1 @ VSEL = 0 V (recommended) | VDD1 | 3 | 5.5 | V | Each voltage relative to its respective ground | 7 | |
| Primary supply VDD1 @ VSEL = VISO (recommended) | VDD1 | 4.5 | 5.5 | V | Each voltage relative to its respective ground | 7 | |
| Storage Temperature | TST | -55 | 150 | °C | 8 | ||
| Ambient Operating Temperature | TA | -40 | 105 | °C | 8 | ||
| Supply Voltages | VDD1, VISO | -0.5 | 7 | V | Each voltage relative to its respective ground | 8 | |
| Input Voltage (RCIN, RCSEL) | RCIN, RCSEL | -0.5 | V | Upper limit printed as VDDI + 0.5 V | 8 | ||
| Output Voltage (RCOUT) | RCOUT | -0.5 | V | Upper limit printed as VDDO + 0.5 V | 8 | ||
| Average Total Output Current | IISO | 80 | mA | 8 | |||
| Common-Mode Transients | -100 | 100 | kV/µs | Across the isolation barrier | 8 | ||
| Setpoint, 5 V primary / 5 V secondary | VISO | 4.7 | 5 | 5.4 | V | IISO = 0 mA | 3 |
| Load Regulation, 5 V primary / 5 V secondary | VISO(LOAD) | 1 | 5 | % | IISO = 8 mA to 72 mA | 3 | |
| Setpoint, 3.3 V primary / 3.3 V secondary | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 3 |
| Load Regulation, 3.3 V primary / 3.3 V secondary | VISO(LOAD) | 1 | 5 | % | IISO = 4 mA to 36 mA | 3 | |
| Setpoint, 5 V primary / 3.3 V secondary | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 4 |
| Load Regulation, 5 V primary / 3.3 V secondary | VISO(LOAD) | 1 | 5 | % | IISO = 10 mA to 90 mA | 4 | |
| IDD1 Supply Current, No VISO Load, 5 V/5 V | IDD1(Q) | 7 | 16 | mA | IISO = 0 mA | 3 | |
| IDD1 Supply Current, No VISO Load, 3.3 V/3.3 V | IDD1(Q) | 5 | 13 | mA | IISO = 0 mA | 3 | |
| IDD1 Supply Current, No VISO Load, 5 V/3.3 V | IDD1(Q) | 4 | 12 | mA | IISO = 0 mA | 4 | |
| IDD1 Supply Current, Full VISO Load, 5 V/5 V | IDD1(MAX) | 290 | mA | 3 | |||
| IDD1 Supply Current, Full VISO Load, 3.3 V/3.3 V | IDD1(MAX) | 175 | mA | 3 | |||
| IDD1 Supply Current, Full VISO Load, 5 V/3.3 V | IDD1(MAX) | 250 | mA | 4 | |||
| Maximum Output Supply Current, 5 V/5 V | IISO(MAX) | 80 | mA | VISO > 4.5 V | 3 | ||
| Maximum Output Supply Current, 3.3 V/3.3 V | IISO(MAX) | 40 | mA | VISO > 3.0 V | 3 | ||
| Maximum Output Supply Current, 5 V/3.3 V | IISO(MAX) | 100 | mA | VISO > 3.0 V | 4 | ||
| Output Ripple, 5 V/5 V | VISO(RIP) | 75 | mV p-p | 20 MHz bandwidth, CBO = 0.1 μF//10 μF, IISO = 72 mA | 3 | ||
| Output Ripple, 3.3 V/3.3 V | VISO(RIP) | 50 | mV p-p | 20 MHz bandwidth, CBO = 0.1 μF//10 μF, IISO = 36 mA | 3 | ||
| Output Ripple, 5 V/3.3 V | VISO(RIP) | 50 | mV p-p | 20 MHz bandwidth, CBO = 0.1 μF//10 μF, IISO = 90 mA | 4 | ||
| Output Noise, 5 V/5 V | VISO(N) | 200 | mV p-p | CBO = 0.1 μF//10 μF, IISO = 72 mA | 3 | ||
| Output Noise, 3.3 V/3.3 V | VISO(N) | 130 | mV p-p | CBO = 0.1 μF//10 μF, IISO = 36 mA | 3 | ||
| Output Noise, 5 V/3.3 V | VISO(N) | 130 | mV p-p | CBO = 0.1 μF//10 μF, IISO = 90 mA | 4 | ||
| Line Regulation, 5 V/5 V | VISO(LINE) | 1 | mV/V | IISO = 40 mA, VDD1 = 4.5 V to 5.5 V | 3 | ||
| Line Regulation, 3.3 V/3.3 V | VISO(LINE) | 1 | mV/V | IISO = 20 mA, VDD1 = 3.0 V to 3.6 V | 3 | ||
| Line Regulation, 5 V/3.3 V | VISO(LINE) | 1 | mV/V | IISO = 50 mA, VDD1 = 4.5 V to 5.5 V | 4 | ||
| Efficiency at Maximum Output Supply Current, 5 V/5 V | 31 | % | IISO = 80 mA | 3 | |||
| Efficiency at Maximum Output Supply Current, 3.3 V/3.3 V | 31 | % | IISO = 40 mA | 3 | |||
| Efficiency at Maximum Output Supply Current, 5 V/3.3 V | 26 | % | IISO = 100 mA | 4 | |||
| Switching Frequency (all configurations) | fOSC | 180 | MHz | 3 | |||
| PWM Frequency (all configurations) | fPWM | 625 | kHz | 3 | |||
| UVLO Positive-Going Threshold (all configurations) | VUV+ | 2.7 | V | 3 | |||
| UVLO Negative-Going Threshold (all configurations) | VUV− | 2.4 | V | 3 | |||
| UVLO Hysteresis (all configurations) | VUVH | 0.3 | V | 3 | |||
| Capacitance (Input-to-Output) | CI-O | 2.2 | pF | f = 1 MHz | 4 | ||
| Input Capacitance | CI | 4 | pF | From any input data pin to ground | 4 | ||
| IC Junction-to-Ambient Thermal Resistance | θJA | 45 | °C/W | Thermocouple at center of package underside; 4-layer board with thin traces | 4 | ||
| Thermal Shutdown Threshold | TSSD | 150 | °C | TJ rising | 4 | ||
| Thermal Shutdown Hysteresis | TSSD-HYS | 20 | °C | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | pC | In accordance with IEC 60747-5-2 (VDE 0884 Part 2):2003-01, each ADuM6000 is proof-tested by applying an insulation test voltage ≥ 1590 V peak for 1 sec (partial discharge detection limit = 5 pC). The | 5 |
CAD (KiCad official)
- Symbol:
ADUM6000ARWZ - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
adum6000arwz-etched.step/adum6000arwz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adum6000arwz.step/adum6000arwz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
63adb9d0217815d6, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ADUM6000ARWZ
**Analog Devices** · DC-DC Converters · SOIC-16-300mil
ADUM6000ARWZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Primary supply voltage, 3.0 V to 5.5 V; pins 1 and 7 are internally connected and both should be externally connected to a common power source. |
| 2 | GND1 | power_in | Ground reference for the primary side of the converter; pins 2 and 8 are internally connected and should both be connected to a common ground. |
| 3 | NC | unconnected | No internal connection. |
| 4 | RCIN | input | Regulation control input that must be tied low or driven by a master RCOUT (slave mode, RCSEL low) to disable or regulate the converter; it is weakly pulled low and must not be tied high when RCSEL is low. |
| 5 | RCOUT | output | Regulation control output in master configuration (RCSEL high), connected to the RCIN pin of a slave isoPower device. |
| 6 | RCSEL | input | Selects standalone/master mode (RCSEL high) or slave mode (RCSEL low); weakly pulled high and should be tied high or low in noisy environments. |
| 7 | VDD1 | power_in | Primary supply voltage, 3.0 V to 5.5 V; internally connected to pin 1 and should be externally connected to the same common power source. |
| 8 | GND1 | power_in | Ground reference for the primary side of the converter; internally connected to pin 2 and should be connected to a common ground. |
| 9 | GNDISO | power_in | Ground reference for the secondary side of the converter; pins 9 and 15 are internally connected and should share a common ground. |
| 10 | VISO | power_out | Secondary supply voltage output for external loads, 3.3 V (VSEL low) or 5.0 V (VSEL high); pins 10 and 16 are internally connected and should both be externally connected. |
| 11 | NC | unconnected | No internal connection. |
| 12 | NC | unconnected | No internal connection. |
| 13 | VSEL | input | Output voltage selection: VSEL = VISO sets VISO to 5.0 V and VSEL = GNDISO sets VISO to 3.3 V; weakly pulled high and has no function in slave mode. |
| 14 | NC | unconnected | No internal connection. |
| 15 | GNDISO | power_in | Ground reference for the secondary side of the converter; internally connected to pin 9 and should share a common ground. |
| 16 | VISO | power_out | Secondary supply voltage output for external loads, 3.3 V (VSEL low) or 5.0 V (VSEL high); internally connected to pin 10 and should be externally connected to it. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-16-300mil |
| Category | Power Supply Chip |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Temperature (recommended) | TA | -40 | | 105 | °C | Operation at 105°C requires reduction of the maximum load current, as specified in Table 10 | 7 |
| Primary supply VDD1 @ VSEL = 0 V (recommended) | VDD1 | 3 | | 5.5 | V | Each voltage relative to its respective ground | 7 |
| Primary supply VDD1 @ VSEL = VISO (recommended) | VDD1 | 4.5 | | 5.5 | V | Each voltage relative to its respective ground | 7 |
| Storage Temperature | TST | -55 | | 150 | °C | | 8 |
| Ambient Operating Temperature | TA | -40 | | 105 | °C | | 8 |
| Supply Voltages | VDD1, VISO | -0.5 | | 7 | V | Each voltage relative to its respective ground | 8 |
| Input Voltage (RCIN, RCSEL) | RCIN, RCSEL | -0.5 | | | V | Upper limit printed as VDDI + 0.5 V | 8 |
| Output Voltage (RCOUT) | RCOUT | -0.5 | | | V | Upper limit printed as VDDO + 0.5 V | 8 |
| Average Total Output Current | IISO | | | 80 | mA | | 8 |
| Common-Mode Transients | | -100 | | 100 | kV/µs | Across the isolation barrier | 8 |
| Setpoint, 5 V primary / 5 V secondary | VISO | 4.7 | 5 | 5.4 | V | IISO = 0 mA | 3 |
| Load Regulation, 5 V primary / 5 V secondary | VISO(LOAD) | | 1 | 5 | % | IISO = 8 mA to 72 mA | 3 |
| Setpoint, 3.3 V primary / 3.3 V secondary | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 3 |
| Load Regulation, 3.3 V primary / 3.3 V secondary | VISO(LOAD) | | 1 | 5 | % | IISO = 4 mA to 36 mA | 3 |
| Setpoint, 5 V primary / 3.3 V secondary | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 4 |
| Load Regulation, 5 V primary / 3.3 V secondary | VISO(LOAD) | | 1 | 5 | % | IISO = 10 mA to 90 mA | 4 |
| IDD1 Supply Current, No VISO Load, 5 V/5 V | IDD1(Q) | | 7 | 16 | mA | IISO = 0 mA | 3 |
| IDD1 Supply Current, No VISO Load, 3.3 V/3.3 V | IDD1(Q) | | 5 | 13 | mA | IISO = 0 mA | 3 |
| IDD1 Supply Current, No VISO Load, 5 V/3.3 V | IDD1(Q) | | 4 | 12 | mA | IISO = 0 mA | 4 |
| IDD1 Supply Current, Full VISO Load, 5 V/5 V | IDD1(MAX) | | | 290 | mA | | 3 |
| IDD1 Supply Current, Full VISO Load, 3.3 V/3.3 V | IDD1(MAX) | | | 175 | mA | | 3 |
| IDD1 Supply Current, Full VISO Load, 5 V/3.3 V | IDD1(MAX) | | | 250 | mA | | 4 |
| Maximum Output Supply Current, 5 V/5 V | IISO(MAX) | | | 80 | mA | VISO > 4.5 V | 3 |
| Maximum Output Supply Current, 3.3 V/3.3 V | IISO(MAX) | | | 40 | mA | VISO > 3.0 V | 3 |
| Maximum Output Supply Current, 5 V/3.3 V | IISO(MAX) | | | 100 | mA | VISO > 3.0 V | 4 |
| Output Ripple, 5 V/5 V | VISO(RIP) | | | 75 | mV p-p | 20 MHz bandwidth, CBO = 0.1 μF//10 μF, IISO = 72 mA | 3 |
| Output Ripple, 3.3 V/3.3 V | VISO(RIP) | | | 50 | mV p-p | 20 MHz bandwidth, CBO = 0.1 μF//10 μF, IISO = 36 mA | 3 |
| Output Ripple, 5 V/3.3 V | VISO(RIP) | | | 50 | mV p-p | 20 MHz bandwidth, CBO = 0.1 μF//10 μF, IISO = 90 mA | 4 |
| Output Noise, 5 V/5 V | VISO(N) | | | 200 | mV p-p | CBO = 0.1 μF//10 μF, IISO = 72 mA | 3 |
| Output Noise, 3.3 V/3.3 V | VISO(N) | | | 130 | mV p-p | CBO = 0.1 μF//10 μF, IISO = 36 mA | 3 |
| Output Noise, 5 V/3.3 V | VISO(N) | | | 130 | mV p-p | CBO = 0.1 μF//10 μF, IISO = 90 mA | 4 |
| Line Regulation, 5 V/5 V | VISO(LINE) | | 1 | | mV/V | IISO = 40 mA, VDD1 = 4.5 V to 5.5 V | 3 |
| Line Regulation, 3.3 V/3.3 V | VISO(LINE) | | 1 | | mV/V | IISO = 20 mA, VDD1 = 3.0 V to 3.6 V | 3 |
| Line Regulation, 5 V/3.3 V | VISO(LINE) | | 1 | | mV/V | IISO = 50 mA, VDD1 = 4.5 V to 5.5 V | 4 |
| Efficiency at Maximum Output Supply Current, 5 V/5 V | | | 31 | | % | IISO = 80 mA | 3 |
| Efficiency at Maximum Output Supply Current, 3.3 V/3.3 V | | | 31 | | % | IISO = 40 mA | 3 |
| Efficiency at Maximum Output Supply Current, 5 V/3.3 V | | | 26 | | % | IISO = 100 mA | 4 |
| Switching Frequency (all configurations) | fOSC | | 180 | | MHz | | 3 |
| PWM Frequency (all configurations) | fPWM | | 625 | | kHz | | 3 |
| UVLO Positive-Going Threshold (all configurations) | VUV+ | | 2.7 | | V | | 3 |
| UVLO Negative-Going Threshold (all configurations) | VUV− | | 2.4 | | V | | 3 |
| UVLO Hysteresis (all configurations) | VUVH | | 0.3 | | V | | 3 |
| Capacitance (Input-to-Output) | CI-O | | 2.2 | | pF | f = 1 MHz | 4 |
| Input Capacitance | CI | | 4 | | pF | From any input data pin to ground | 4 |
| IC Junction-to-Ambient Thermal Resistance | θJA | | 45 | | °C/W | Thermocouple at center of package underside; 4-layer board with thin traces | 4 |
| Thermal Shutdown Threshold | TSSD | | 150 | | °C | TJ rising | 4 |
| Thermal Shutdown Hysteresis | TSSD-HYS | | 20 | | °C | | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | pC | | In accordance with IEC 60747-5-2 (VDE 0884 Part 2):2003-01, each ADuM6000 is proof-tested by applying an insulation test voltage ≥ 1590 V peak for 1 sec (partial discharge detection limit = 5 pC). The | 5 |
## CAD (KiCad official)
- Symbol: `ADUM6000ARWZ`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `adum6000arwz-etched.step` / `adum6000arwz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `adum6000arwz.step` / `adum6000arwz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM6000.PDF) (16 pp, sha256 `63adb9d0217815d6`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/adum6000arwz-datasheet.pdf)