Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADUM5404ARWZ-RL

Analog Devices · Digital Isolators · SOIC-16-300mil

ADUM5404ARWZ-RL from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Primary supply voltage, 3.0 V to 5.5 V.
2 GND1 power_in Ground 1 is the ground reference for the isolator primary side; it is internally connected to pin 8 and both pins should be connected to a common ground.
3 VOA output Logic Output A.
4 VOB output Logic Output B.
5 VOC output Logic Output C.
6 VOD output Logic Output D.
7 RCOUT output Regulation control output that connects to the RCIN pin of a slave isoPower device so the ADuM5404 can control the slave's regulation.
8 GND1 power_in Ground 1 is the ground reference for the isolator primary side; it is internally connected to pin 2 and both pins should be connected to a common ground.
9 GNDISO power_in Ground reference for isolator side 2; it is internally connected to pin 15 and both pins should be connected to a common ground.
10 VSEL input Output voltage selection: VISO setpoint is 5.0 V when VSEL = VISO and 3.3 V when VSEL = GNDISO.
11 VID input Logic Input D.
12 VIC input Logic Input C.
13 VIB input Logic Input B.
14 VIA input Logic Input A.
15 GNDISO power_in Ground reference for isolator side 2; it is internally connected to pin 9 and both pins should be connected to a common ground.
16 VISO power_out Secondary supply voltage output for external loads, 3.3 V (VSEL low) or 5.0 V (VSEL high).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-16-300mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Temperature TA -40 105 °C 11
Supply Voltage VDD1 (VSEL = 0 V) VDD 3 5.5 V VSEL = 0 V 11
Supply Voltage VDD1 (VSEL = VISO) VDD 4.5 5.5 V VSEL = VISO 11
Storage Temperature Range TST -55 150 °C 12
Ambient Operating Temperature Range TA -40 105 °C 12
Supply Voltages VDD1, VISO -0.5 7 V 12
Input Voltage (max printed as VDDI + 0.5 V, not numeric) VIA, VIB, VIC, VID, VSEL -0.5 V 12
Output Voltage (max printed as VDDO + 0.5 V, not numeric) VOA, VOB, VOC, VOD -0.5 V 12
Average Output Current per Pin -10 10 mA 12
Common-Mode Transients -100 100 kV/μs 12
DC-to-DC Setpoint VISO (5 V/5 V) VISO 4.7 5 5.4 V IISO = 0 mA 4
Load Regulation VISO (5 V/5 V) VISO (LOAD) 1 5 % IISO = 10 mA to 90 mA 4
IDD1, No VISO Load (5 V/5 V) IDD1 (Q) 19 30 mA 4
Propagation Delay (5 V/5 V, A grade) tPHL, tPLH 55 100 ns 50% input to 50% output 4
Pulse Width Distortion (5 V/5 V, A grade) PWD 40 ns /tPLH − tPHL/ 4
Data Rate (A grade, 5 V/5 V) 1 Mbps Within PWD limit 4
Pulse Width (A grade, 5 V/5 V) PW 1000 ns Within PWD limit 4
Propagation Delay Skew (5 V/5 V, A grade) tPSK 50 ns Between any two units 4
Channel Matching Codirectional (5 V/5 V, A grade) tPSKCD 50 ns 4
Channel Matching Opposing Directional (5 V/5 V, A grade) tPSKOD 50 ns 4
Logic Low Output Voltage (5 V/5 V) VOL 0 0.1 V IOx = 20 μA, VIx = VIxL 5
Logic Low Output Voltage (5 V/5 V) VOL 0.2 0.4 V IOx = 4 mA, VIx = VIxL 5
Input Current per Channel (5 V/5 V) II -20 0.01 20 μA 0 V ≤ VIx ≤ VDDx 5
Common-Mode Transient Immunity (5 V/5 V) /CM/ 25 35 kV/μs VIx = VDD1 or VISO, VCM = 1000 V, transient magnitude = 800 V 5
DC-to-DC Setpoint VISO (3.3 V/3.3 V) VISO 3 3.3 3.6 V IISO = 0 mA 6
Load Regulation VISO (3.3 V/3.3 V) VISO (LOAD) 1 5 % IISO = 6 mA to 54 mA 6
IDD1, No VISO Load (3.3 V/3.3 V) IDD1 (Q) 14 20 mA 6
Data Rate (A grade, 3.3 V/3.3 V) 1 Mbps Within PWD limit 6
Propagation Delay (3.3 V/3.3 V, A grade) tPHL, tPLH 60 100 ns 50% input to 50% output 6
Pulse Width Distortion (3.3 V/3.3 V, A grade) PWD 40 ns /tPLH − tPHL/ 6
Pulse Width (A grade, 3.3 V/3.3 V) PW 1000 ns Within PWD limit 6
Propagation Delay Skew (3.3 V/3.3 V, A grade) tPSK 50 ns Between any two units 6
Channel Matching Codirectional (3.3 V/3.3 V, A grade) tPSKCD 50 ns 6
Channel Matching Opposing Directional (3.3 V/3.3 V, A grade) tPSKOD 50 ns 6
Logic Low Output Voltage (3.3 V/3.3 V) VOL 0 0.1 V IOx = 20 μA, VIx = VIxL 7
Logic Low Output Voltage (3.3 V/3.3 V) VOL 0 0.4 V IOx = 4 mA, VIx = VIxL 7
Input Current per Channel (3.3 V/3.3 V) II -10 0.01 10 μA 0 V ≤ VIx ≤ VDDx 7
Common-Mode Transient Immunity (3.3 V/3.3 V) /CM/ 25 35 kV/μs VIx = VDD1 or VISO, VCM = 1000 V, transient magnitude = 800 V 7
DC-to-DC Setpoint VISO (5 V/3.3 V) VISO 3 3.3 3.6 V IISO = 0 mA 8
Load Regulation VISO (5 V/3.3 V) VISO (LOAD) 1 5 % IISO = 6 mA to 54 mA 8
IDD1, No VISO Load (5 V/3.3 V) IDD1 (Q) 14 20 mA 8
Data Rate (A grade, 5 V/3.3 V) 1 Mbps Within PWD limit 8
Propagation Delay (5 V/3.3 V, A grade) tPHL, tPLH 60 100 ns 50% input to 50% output 8
Pulse Width Distortion (5 V/3.3 V, A grade) PWD 40 ns /tPLH − tPHL/ 8
Pulse Width (A grade, 5 V/3.3 V) PW 1000 ns Within PWD limit 8
Propagation Delay Skew (5 V/3.3 V, A grade) tPSK 50 ns Between any two units 8
Channel Matching Codirectional (5 V/3.3 V, A grade) tPSKCD 50 ns 8
Channel Matching Opposing Directional (5 V/3.3 V, A grade) tPSKOD 50 ns 8
Logic Low Output Voltage (5 V/3.3 V) VOL 0 0.1 V IOx = 20 μA, VIx = VIxL 9
Logic Low Output Voltage (5 V/3.3 V) VOL 0 0.4 V IOx = 4 mA, VIx = VIxL 9
Input Current per Channel (5 V/3.3 V) II -10 0.01 10 μA 0 V ≤ VIx ≤ VDDx 9
Common-Mode Transient Immunity (5 V/3.3 V) /CM/ 25 35 kV/μs VIx = VDD1 or VISO, VCM = 1000 V, transient magnitude = 800 V 9
Thermal Resistance IC Junction-to-Ambient θJA 45 °C/W Thermocouple located at center of package underside, test conducted on 4-layer board with thin traces 10

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing pC In accordance with IEC 60747-5-2 (VDE 0884 Part 2):2003-01, each ADuM5401/ADuM5402/ADuM5403/ADuM5404 is proof tested by applying an insulation test voltage ≥ 1590 V peak for 1 second (partial discharg 10

CAD (KiCad official)

  • Symbol: ADUM5404ARWZ-RL
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: adum5404arwz-etched.step / adum5404arwz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adum5404arwz.step / adum5404arwz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (29 pp, sha256 f72df40701e8ebb3, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF