3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownADUM5403ARWZ
Analog Devices · Digital Isolators · SOIC-16-300mil
ADUM5403ARWZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Primary supply voltage, specified at 3.0 V to 5.5 V with VSEL = 0 V and 4.5 V to 5.5 V with VSEL = VISO. |
| 2 | GND1 | power_in | Ground 1, the ground reference for the isolator primary; pins 2 and 8 are internally connected and both should be tied to a common ground. |
| 3 | VIA | input | Logic Input A on the primary side; the input logic-high threshold is 0.7 × VDD1 and the logic-low threshold is 0.3 × VDD1. |
| 4 | VOB | output | Logic Output B; the logic-high output is VDD1 − 0.2 V minimum at −20 µA and the logic-low output is 0.4 V maximum at 4 mA. |
| 5 | VOC | output | Logic Output C; the logic-high output is VDD1 − 0.2 V minimum at −20 µA and the logic-low output is 0.4 V maximum at 4 mA. |
| 6 | VOD | output | Logic Output D; the logic-high output is VDD1 − 0.2 V minimum at −20 µA and the logic-low output is 0.4 V maximum at 4 mA. |
| 7 | RCOUT | output | Regulation Control Output, connected to the RCIN pin of a slave isoPower device so this device can control the slave's regulation. |
| 8 | GND1 | power_in | Ground 1, the ground reference for the isolator primary; pins 2 and 8 are internally connected and both should be tied to a common ground. |
| 9 | GNDISO | power_in | Ground reference for isolator side 2; pins 9 and 15 are internally connected and both should be tied to a common ground. |
| 10 | VSEL | input | Output voltage selection: VSEL = VISO sets the VISO setpoint to 5.0 V, and VSEL = GNDISO sets it to 3.3 V. |
| 11 | VID | input | Logic Input D on the isolated side; the input logic-high threshold is 0.7 × VISO and the logic-low threshold is 0.3 × VISO. |
| 12 | VIC | input | Logic Input C on the isolated side; the input logic-high threshold is 0.7 × VISO and the logic-low threshold is 0.3 × VISO. |
| 13 | VIB | input | Logic Input B on the isolated side; the input logic-high threshold is 0.7 × VISO and the logic-low threshold is 0.3 × VISO. |
| 14 | VOA | output | Logic Output A on the isolated side; the logic-high output is VISO − 0.2 V minimum at −20 µA and the logic-low output is 0.4 V maximum at 4 mA. |
| 15 | GNDISO | power_in | Ground reference for isolator side 2; pins 9 and 15 are internally connected and both should be tied to a common ground. |
| 16 | VISO | power_out | Secondary supply voltage output for external loads, 3.3 V with VSEL low or 5.0 V with VSEL high. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC-to-DC setpoint, VDD1 5 V / VISO 5 V | VISO | 4.7 | 5 | 5.4 | V | IISO = 0 mA | 4 |
| DC-to-DC setpoint, VDD1 3.3 V / VISO 3.3 V | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 6 |
| DC-to-DC setpoint, VDD1 5 V / VISO 3.3 V | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 8 |
| Input current per channel, 5 V / 5 V | II | -20 | 0.01 | 20 | μA | 0 V ≤ VIx ≤ VDDx | 5 |
| Input current per channel, 3.3 V / 3.3 V | II | -10 | 0.01 | 10 | μA | 0 V ≤ VIx ≤ VDDx | 7 |
| Input current per channel, 5 V / 3.3 V | II | -10 | 0.01 | 10 | μA | 0 V ≤ VIx ≤ VDDx | 9 |
| Logic low output voltage, 5 V / 5 V, 20 μA load | VOL | 0 | 0.1 | V | IOx = 20 μA, VIx = VIxL | 5 | |
| Logic low output voltage, 5 V / 5 V, 4 mA load | VOL | 0.2 | 0.4 | V | IOx = 4 mA, VIx = VIxL | 5 | |
| Logic low output voltage, 3.3 V / 3.3 V, 20 μA load | VOL | 0 | 0.1 | V | IOx = 20 μA, VIx = VIxL | 7 | |
| Logic low output voltage, 3.3 V / 3.3 V, 4 mA load | VOL | 0 | 0.4 | V | IOx = 4 mA, VIx = VIxL | 7 | |
| Logic low output voltage, 5 V / 3.3 V, 20 μA load | VOL | 0 | 0.1 | V | IOx = 20 μA, VIx = VIxL | 9 | |
| Logic low output voltage, 5 V / 3.3 V, 4 mA load | VOL | 0 | 0.4 | V | IOx = 4 mA, VIx = VIxL | 9 | |
| Output load regulation, 5 V / 5 V | VISO(LOAD) | 1 | 5 | % | IISO = 10 mA to 90 mA | 4 | |
| Output load regulation, 3.3 V / 3.3 V | VISO(LOAD) | 1 | 5 | % | IISO = 6 mA to 54 mA | 6 | |
| Output load regulation, 5 V / 3.3 V | VISO(LOAD) | 1 | 5 | % | IISO = 6 mA to 54 mA | 8 | |
| Quiescent input current IDD1(Q), 5 V / 5 V, no VISO load | IDD1 (Q) | 19 | 30 | mA | 4 | ||
| Quiescent input current IDD1(Q), 3.3 V / 3.3 V, no VISO load | IDD1 (Q) | 14 | 20 | mA | 6 | ||
| Quiescent input current IDD1(Q), 5 V / 3.3 V, no VISO load | IDD1 (Q) | 14 | 20 | mA | 8 | ||
| Common-mode transient immunity, 5 V / 5 V | /CM/ | 25 | 35 | kV/μs | VIx = VDD1 or VISO, VCM = 1000 V, transient magnitude = 800 V | 5 | |
| Common-mode transient immunity, 3.3 V / 3.3 V | /CM/ | 25 | 35 | kV/μs | VIx = VDD1 or VISO, VCM = 1000 V, transient magnitude = 800 V | 7 | |
| Common-mode transient immunity, 5 V / 3.3 V | /CM/ | 25 | 35 | kV/μs | VIx = VDD1 or VISO, VCM = 1000 V, transient magnitude = 800 V | 9 | |
| Propagation delay tPHL, tPLH (A grade), 5 V / 5 V | tPHL, tPLH | 55 | 100 | ns | 50% input to 50% output | 4 | |
| Propagation delay tPHL, tPLH (A grade), 3.3 V / 3.3 V | tPHL, tPLH | 60 | 100 | ns | 50% input to 50% output | 6 | |
| Propagation delay tPHL, tPLH (A grade), 5 V / 3.3 V | tPHL, tPLH | 60 | 100 | ns | 50% input to 50% output | 8 | |
| Pulse width distortion PWD (A grade), 5 V / 5 V | PWD | 40 | ns | /tPLH − tPHL/ | 4 | ||
| Pulse width distortion PWD (A grade), 3.3 V / 3.3 V | PWD | 40 | ns | /tPLH − tPHL/ | 6 | ||
| Pulse width distortion PWD (A grade), 5 V / 3.3 V | PWD | 40 | ns | /tPLH − tPHL/ | 8 | ||
| Pulse width PW (A grade), 5 V / 5 V | PW | 1000 | ns | Within PWD limit | 4 | ||
| Pulse width PW (A grade), 3.3 V / 3.3 V | PW | 1000 | ns | Within PWD limit | 6 | ||
| Pulse width PW (A grade), 5 V / 3.3 V | PW | 1000 | ns | Within PWD limit | 8 | ||
| Propagation delay skew tPSK (A grade), 5 V / 5 V | tPSK | 50 | ns | Between any two units | 4 | ||
| Propagation delay skew tPSK (A grade), 3.3 V / 3.3 V | tPSK | 50 | ns | Between any two units | 6 | ||
| Propagation delay skew tPSK (A grade), 5 V / 3.3 V | tPSK | 50 | ns | Between any two units | 8 | ||
| Codirectional channel matching tPSKCD (A grade), 5 V / 5 V | tPSKCD | 50 | ns | 4 | |||
| Codirectional channel matching tPSKCD (A grade), 3.3 V / 3.3 V | tPSKCD | 50 | ns | 6 | |||
| Codirectional channel matching tPSKCD (A grade), 5 V / 3.3 V | tPSKCD | 50 | ns | 8 | |||
| Opposing directional channel matching tPSKOD (A grade), 5 V / 5 V | tPSKOD | 50 | ns | 4 | |||
| Opposing directional channel matching tPSKOD (A grade), 3.3 V / 3.3 V | tPSKOD | 50 | ns | 6 | |||
| Opposing directional channel matching tPSKOD (A grade), 5 V / 3.3 V | tPSKOD | 50 | ns | 8 | |||
| Data rate (A grade) | 1 | Mbps | Within PWD limit | 4 | |||
| Operating temperature | TA | -40 | 105 | °C | 11 | ||
| Supply voltage VDD1 at VSEL = 0 V | VDD | 3 | 5.5 | V | VDD1 @ VSEL = 0 V | 11 | |
| Supply voltage VDD1 at VSEL = VISO | VDD | 4.5 | 5.5 | V | VDD1 @ VSEL = VISO | 11 | |
| Storage temperature range | TST | -55 | 150 | °C | 12 | ||
| Ambient operating temperature range | TA | -40 | 105 | °C | 12 | ||
| Supply voltages | VDD1, VISO | -0.5 | 7 | V | Each voltage relative to its respective ground | 12 | |
| Input voltage | VIA, VIB, VIC, VID, VSEL | -0.5 | V | Maximum printed as VDDI + 0.5 V | 12 | ||
| Output voltage | VOA, VOB, VOC, VOD | -0.5 | V | Maximum printed as VDDO + 0.5 V | 12 | ||
| Average output current per pin | -10 | 10 | mA | 12 | |||
| Common-mode transients | -100 | 100 | kV/μs | 12 | |||
| IC junction-to-ambient thermal resistance | θJA | 45 | °C/W | Thermocouple located at center of package underside, test conducted on 4-layer board with thin traces | 10 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | pC | In accordance with IEC 60747-5-2 (VDE 0884 Part 2):2003-01, each ADuM5401/ADuM5402/ADuM5403/ADuM5404 is proof tested by applying an insulation test voltage ≥ 1590 V peak for 1 second (partial discharg | 10 |
CAD (KiCad official)
- Symbol:
ADUM5403ARWZ - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
adum5403arwz-etched.step/adum5403arwz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adum5403arwz.step/adum5403arwz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (29 pp, sha256
f72df40701e8ebb3, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).