main
Ray
Publish 0.1.0
ba4d6bb
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290
{
"slug": "adum5201crwz",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices Digital Isolators, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"communication interface chip-uart-485-232",
"adum5201crwz-rl",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"adum5201crwz.kicad_sym",
"adum5201crwz.kicad_mod",
"adum5201crwz.glb",
"adum5201crwz.step",
"adum5201crwz.lbr",
"docs/hero.png",
"docs/adum5201crwz-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"adum5201crwz-hero.glb",
"adum5201crwz-hero.overlay.json",
"adum5201crwz-etched.glb"
],
"component": {
"mpn": "ADUM5201CRWZ",
"manufacturer": "Analog Devices",
"package": "SOIC-16-300mil",
"pin_count": 16,
"category": "Communication Interface Chip/UART/485/232",
"subcategory": "Digital Isolators",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM5200_5201_5202.pdf",
"parts": {
"symbol": "adum5201crwz.kicad_sym",
"footprint": "adum5201crwz.kicad_mod",
"model_3d": "adum5201crwz-hero.glb",
"model_3d_plain": "adum5201crwz-etched.glb",
"model_3d_step": "adum5201crwz-etched.step",
"model_3d_step_plain": "adum5201crwz.step",
"lbr": "adum5201crwz.lbr"
},
"distributor_links": {
"lcsc": "C444943",
"digikey": "ADUM5201CRWZ-RLTR-ND",
"mouser": "584-ADUM5201CRWZ-R"
},
"distributor_check": {
"checked_at": "2026-11-12T18:13:24Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "ADUM5201CRWZ-RLTR-ND",
"status": "found"
},
"mouser": {
"pn": "584-ADUM5201CRWZ-R",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "VDD1",
"type": "power_in",
"description": "Primary supply voltage, 3.0 V to 5.5 V."
},
{
"number": "2",
"name": "GND1",
"type": "power_in",
"description": "Ground 1, the ground reference for the isolator primary side; pins 2 and 8 are internally connected and both should be tied to a common ground."
},
{
"number": "3",
"name": "VIA",
"type": "input",
"description": "Logic input A; the pin function table gives no further electrical limits for this pin."
},
{
"number": "4",
"name": "VOB",
"type": "output",
"description": "Logic output B on the primary side; the output is high-Z when VE1 is low."
},
{
"number": "5",
"name": "RCIN",
"type": "input",
"description": "Regulation control input that must be connected to the RCOUT pin of a master isoPower device or tied low, and must not be tied high while RCSEL is low."
},
{
"number": "6",
"name": "RCSEL",
"type": "input",
"description": "Selects self-regulation mode (high) or slave mode (low); the pin is weakly pulled high and should be tied high or low in noisy environments."
},
{
"number": "7",
"name": "VE1",
"type": "input",
"description": "Primary data enable; when high or not connected the primary output is active, and when low the output is in a high-Z state."
},
{
"number": "8",
"name": "GND1",
"type": "power_in",
"description": "Ground 1, the ground reference for the isolator primary side; internally connected to pin 2 and should be tied to a common ground."
},
{
"number": "9",
"name": "GNDISO",
"type": "power_in",
"description": "Ground reference for isolator side 2; internally connected to pin 15 and should be tied to a common ground."
},
{
"number": "10",
"name": "VE2",
"type": "input",
"description": "Secondary data enable; when high or not connected the secondary output is active, and when low the output is in a high-Z state."
},
{
"number": "11",
"name": "VSEL",
"type": "input",
"description": "Output voltage selection; VSEL = VISO sets the VISO setpoint to 5.0 V, VSEL = GNDISO sets it to 3.3 V, and the pin has no function in slave regulation mode."
},
{
"number": "12",
"name": "NC",
"type": "unconnected",
"description": "No internal connection."
},
{
"number": "13",
"name": "VIB",
"type": "input",
"description": "Logic input B on the secondary (VISO) side; the pin function table gives no further electrical limits for this pin."
},
{
"number": "14",
"name": "VOA",
"type": "output",
"description": "Logic output A on the secondary (VISO) side; the output is high-Z when VE2 is low."
},
{
"number": "15",
"name": "GNDISO",
"type": "power_in",
"description": "Ground reference for isolator side 2; internally connected to pin 9 and should be tied to a common ground."
},
{
"number": "16",
"name": "VISO",
"type": "power_out",
"description": "Secondary supply voltage output for the secondary-side isolated data channels and external loads; the setpoint is 5.0 V or 3.3 V as selected by VSEL."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Package match: the ordering guide lists ADuM5201CRWZ in 16-Lead SOIC_W (RW-16), and the -RL suffix i; Pinout source: the ADuM5201 pin table (Table 22 and Figure 7) is on page 13. Pin descriptions are ta; Two datasheet items are not verifiable from the pin table alone: the VISO setpoint values (5.0 V or "
],
"pages_sent": 28,
"cost_usd": 0.1484,
"at": "2026-11-12T18:13:07"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM5200_5201_5202.pdf",
"pages": 28,
"sha256": "5ae4ecebde77b1fb",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "adum5201crwz.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
10.3,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "adum5201crwz-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.3,
10.3,
2.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "912513eec9f9a41b952ed8ea82629acde44273748ffef45cbe8e5d4e28a187b6",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "RW-16",
"source_page": 25,
"D": {
"nom_mm": 10.3,
"range_mm": [
10.1,
10.5
]
},
"E1": {
"nom_mm": 7.5,
"range_mm": [
7.4,
7.6
]
},
"E": {
"nom_mm": 10.325,
"range_mm": [
10.0,
10.65
]
},
"e": {
"nom_mm": 1.27,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 2.5,
"range_mm": [
2.35,
2.65
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "adum5201crwz.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}