main
History Download
Ray Publish 0.1.0 ba4d6bb

ADUM5201CRWZ-RL

Analog Devices · Digital Isolators · SOIC-16-300mil

ADUM5201CRWZ-RL from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Primary supply voltage, 3.0 V to 5.5 V.
2 GND1 power_in Ground 1, the ground reference for the isolator primary side; pins 2 and 8 are internally connected and both should be tied to a common ground.
3 VIA input Logic input A; the pin function table gives no further electrical limits for this pin.
4 VOB output Logic output B on the primary side; the output is high-Z when VE1 is low.
5 RCIN input Regulation control input that must be connected to the RCOUT pin of a master isoPower device or tied low, and must not be tied high while RCSEL is low.
6 RCSEL input Selects self-regulation mode (high) or slave mode (low); the pin is weakly pulled high and should be tied high or low in noisy environments.
7 VE1 input Primary data enable; when high or not connected the primary output is active, and when low the output is in a high-Z state.
8 GND1 power_in Ground 1, the ground reference for the isolator primary side; internally connected to pin 2 and should be tied to a common ground.
9 GNDISO power_in Ground reference for isolator side 2; internally connected to pin 15 and should be tied to a common ground.
10 VE2 input Secondary data enable; when high or not connected the secondary output is active, and when low the output is in a high-Z state.
11 VSEL input Output voltage selection; VSEL = VISO sets the VISO setpoint to 5.0 V, VSEL = GNDISO sets it to 3.3 V, and the pin has no function in slave regulation mode.
12 NC unconnected No internal connection.
13 VIB input Logic input B on the secondary (VISO) side; the pin function table gives no further electrical limits for this pin.
14 VOA output Logic output A on the secondary (VISO) side; the output is high-Z when VE2 is low.
15 GNDISO power_in Ground reference for isolator side 2; internally connected to pin 9 and should be tied to a common ground.
16 VISO power_out Secondary supply voltage output for the secondary-side isolated data channels and external loads; the setpoint is 5.0 V or 3.3 V as selected by VSEL.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-16-300mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Temperature TA -40 105 °C 10
Supply Voltage VDD1 @ VSEL = 0 V VDD1 3 5.5 V VSEL = 0 V 10
Supply Voltage VDD1 @ VSEL = VISO VDD1 4.5 5.5 V VSEL = VISO 10
Storage Temperature Range TST -55 150 °C 11
Ambient Operating Temperature Range TA -40 105 °C 11
Supply Voltages (VDD1, VISO) VDD1, VISO -0.5 7 V Each voltage relative to its respective ground 11
Input Voltage (VIA, VIB, RCIN, RCSEL, VSEL), max printed as VDDI + 0.5 V VIA, VIB, RCIN, RCSEL, VSEL -0.5 V Each voltage relative to its respective ground 11
Output Voltage (VOA, VOB), max printed as VDDO + 0.5 V VOA, VOB -0.5 V Each voltage relative to its respective ground 11
Average Output Current per Pin -10 10 mA 11
Common-Mode Transients -100 100 kV/µs 11
Common-Mode Transient Immunity /CM/ 25 35 kV/µs VIx = VDD1 or VISO, VCM = 1000 V, transient magnitude = 800 V 4
Input Currents per Channel II -20 0.01 20 µA 0 V ≤ VIx ≤ VDDx 4
DC-to-DC Converter Setpoint (5 V primary / 5 V secondary) VISO 4.7 5 5.4 V IISO = 0 mA 3
DC-to-DC Converter Setpoint (3.3 V primary / 3.3 V secondary) VISO 3 3.3 3.6 V IISO = 0 mA 5
DC-to-DC Converter Setpoint (5 V primary / 3.3 V secondary) VISO 3 3.3 3.6 V IISO = 0 mA 7
Propagation Delay, C Grade (5 V/5 V) tPHL, tPLH 45 60 ns 50% input to 50% output 3
Pulse Width Distortion, C Grade PWD 6 ns /tPLH − tPHL/ 3
Pulse Width, C Grade PW 40 ns Within PWD limit 3
Propagation Delay Skew (5 V/5 V), C Grade tPSK 15 ns Between any two units 3
Propagation Delay Skew (3.3 V/3.3 V), C Grade tPSK 45 ns Between any two units 5
Codirectional Channel Matching, C Grade tPSKCD 6 ns 3
Opposing Directional Channel Matching, C Grade tPSKOD 15 ns 3
Maximum Data Rate, C Grade 25 Mbps Within PWD limit 3
IC Junction to Ambient Thermal Resistance θJA 45 °C/W Thermocouple at center of package underside; 4-layer board with thin traces 9
Thermal Shutdown Threshold TSSD 150 °C TJ rising 9
Thermal Shutdown Hysteresis TSSD-HYS 20 °C 9
Input Capacitance (Input-to-Output) CI-O 2.2 pF f = 1 MHz 9
Input Capacitance CI 4 pF Input capacitance from any input data pin to ground 9

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing pC In accordance with IEC 60747-5-2 (VDE 0884 Part 2):2003-01, each ADuM520x is proof tested by applying an insulation test voltage ≥ 1590 VPEAK for 1 second (partial discharge detection limit = 5 pC). T 9

CAD (KiCad official)

  • Symbol: ADUM5201CRWZ-RL
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: adum5201crwz-etched.step / adum5201crwz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adum5201crwz.step / adum5201crwz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (28 pp, sha256 5ae4ecebde77b1fb, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF