ADUM3200ARZ from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VDD1	power_in	Supply voltage for isolator side 1, specified at 3.0 V to 5.5 V relative to GND1 (Table 29).
2	VIA	input	Logic input A; logic-high threshold is 0.7 VDDx and logic-low threshold is 0.3 VDDx (Table 24).
3	VIB	input	Logic input B; logic-high threshold is 0.7 VDDx and logic-low threshold is 0.3 VDDx (Table 24).
4	GND1	power_in	Ground reference for isolator side 1 (Table 34).
5	GND2	power_in	Ground reference for isolator side 2 (Table 34).
6	VOB	output	Logic output B; high output is VDDx − 0.1 V at IOx = −20 µA and low output is 0.1 V at IOx = 20 µA (Table 24).
7	VOA	output	Logic output A; high output is VDDx − 0.1 V at IOx = −20 µA and low output is 0.1 V at IOx = 20 µA (Table 24).
8	VDD2	power_in	Supply voltage for isolator side 2, specified at 3.0 V to 5.5 V relative to GND2 (Table 29).

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	SOIC-8
Category	Interface ICs
Pins	8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Operating Temperature (ADuM3200A/ADuM3201A)	TA	-40		105	°C	ADuM3200A/ADuM3201A	15
Supply Voltages (ADuM3200A/ADuM3201A)	VDD1, VDD2	3		5.5	V	ADuM3200A/ADuM3201A; relative to respective ground	15
Maximum Input Signal Rise and Fall Times				1	ms		15
Storage Temperature	TST	-55		150	°C		16
Ambient Operating Temperature	TA	-40		125	°C		16
Supply Voltages	VDD1, VDD2	-0.5		7	V	Relative to respective ground	16
Average Output Current, per Pin	IO	-22		22	mA		16
Common-Mode Transients	CML, CMH	-100		100	kV/µs	Across the insulation barrier	16
IC Junction-to-Case Thermal Resistance, Side 1	θJCI		46		°C/W	Thermocouple located at center of package underside	13
IC Junction-to-Case Thermal Resistance, Side 2	θJCO		41		°C/W		13
Data Rate (5 V, A grade)				1	Mbps	Within PWD limit	4
Propagation Delay (5 V, A grade)	tPHL, tPLH		20	150	ns	50% input to 50% output	4
Pulse Width Distortion (5 V, A grade)	PWD			40	ns	/tPLH − tPHL/	4
Change vs. Temperature (5 V, A grade)				6	ps/°C		4
Pulse Width (5 V, A grade)	PW	1000			ns	Within PWD limit	4
Propagation Delay Skew (5 V, A grade)	tPSK			100	ns	Between any two units	4
Channel Matching Codirectional (5 V, A grade)	tPSKCD			50	ns		4
Channel Matching Opposing-Direction (5 V, A grade)	tPSKOD			50	ns		4
Output Rise/Fall Time (5 V, A grade)	tR/tF			10	ns	10% to 90%	4
ADuM3200 Supply Current IDD1 (5 V, 1 Mbps)	IDD1		1.3	1.8	mA	No load; 1 Mbps	4
ADuM3200 Supply Current IDD2 (5 V, 1 Mbps)	IDD2		1	1.6	mA	No load; 1 Mbps	4
ADuM3201 Supply Current IDD1 (5 V, 1 Mbps)	IDD1		1.1	1.6	mA	No load; 1 Mbps	4
ADuM3201 Supply Current IDD2 (5 V, 1 Mbps)	IDD2		1.3	1.9	mA	No load; 1 Mbps	4
Input Current per Channel (5 V)	II	-10	0.01	10	µA	0 V ≤ VIx ≤ VDDX	4
Quiescent Input Supply Current (5 V)	IDDI(Q)		0.4	0.8	mA	VIA = VIB = 0 V	4
Quiescent Output Supply Current (5 V)	IDDO(Q)		0.5	0.6	mA	VIA = VIB = 0 V	4
Common-Mode Transient Immunity (5 V)	/CM/	25	35		kV/µs	VIx = VDDX, VCM = 1000 V, transient magnitude = 800 V	4
Data Rate (3.3 V, A grade)				1	Mbps	Within PWD limit	5
Propagation Delay (3.3 V, A grade)	tPHL, tPLH		20	150	ns	50% input to 50% output	5
Pulse Width Distortion ADuM3200 (3.3 V, A grade)	PWD			40	ns	/tPLH − tPHL/	5
Pulse Width Distortion ADuM3201 (3.3 V, A grade)	PWD			40	ns	/tPLH − tPHL/	5
Change vs. Temperature (3.3 V, A grade)				6	ps/°C		5
Pulse Width (3.3 V, A grade)	PW	1000			ns	Within PWD limit	5
Propagation Delay Skew (3.3 V, A grade)	tPSK			100	ns	Between any two units	5
Channel Matching Codirectional (3.3 V, A grade)	tPSKCD			50	ns		5
Channel Matching Opposing-Direction (3.3 V, A grade)	tPSKOD			50	ns		5
Output Rise/Fall Time (3.3 V, A grade)	tR/tF			3	ns	10% to 90%	5
ADuM3200 Supply Current IDD1 (3.3 V, 1 Mbps)	IDD1		0.8	1.3	mA	No load; 1 Mbps	5
ADuM3200 Supply Current IDD2 (3.3 V, 1 Mbps)	IDD2		0.7	1	mA	No load; 1 Mbps	5
ADuM3201 Supply Current IDD1 (3.3 V, 1 Mbps)	IDD1		0.7	1.3	mA	No load; 1 Mbps	5
ADuM3201 Supply Current IDD2 (3.3 V, 1 Mbps)	IDD2		0.8	1.6	mA	No load; 1 Mbps	5
Input Current per Channel (3.3 V)	II	-10	0.01	10	µA	0 V ≤ VIx ≤ VDDX	5
Quiescent Input Supply Current (3.3 V)	IDDI(Q)		0.3	0.5	mA	VIA = VIB = 0 V	5
Quiescent Output Supply Current (3.3 V)	IDDO(Q)		0.3	0.5	mA	VIA = VIB = 0 V	5
Common-Mode Transient Immunity (3.3 V)	/CM/	25	35		kV/µs	VIx = VDDX, VCM = 1000 V, transient magnitude = 800 V	6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part	Material	Colour / plating	Datasheet says	Page
housing	pC		In accordance with DIN EN IEC 60747-17 (VDE 0884-17), each ADuM3200/ADuM3201 is proof-tested by applying an insulation test voltage ≥1050 VPEAK for 1 second (partial discharge detection limit = 5 pC).	13

CAD (KiCad official)

Symbol: ADUM3200ARZ
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)
3D model files: adum3200arz-etched.step / adum3200arz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adum3200arz.step / adum3200arz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (24 pp, sha256 93c1a9b1b427e31c, retrieved 2026-10-30, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

ADUM3200ARZ

Verified ADUM3200ARZ

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README