3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownADUM1300BRWZ-RL
Analog Devices · Digital Isolators · SOP-16-300mil
ADUM1300BRWZ-RL from Analog Devices, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Supply voltage for isolator side 1, recommended 2.7 V to 5.5 V relative to GND1. |
| 2 | GND1 | power_in | Ground reference for isolator side 1. |
| 3 | VIA | input | Logic input A on isolator side 1. |
| 4 | VIB | input | Logic input B on isolator side 1. |
| 5 | VIC | input | Logic input C on isolator side 1. |
| 6 | NC | unconnected | No connect. |
| 7 | NC | unconnected | No connect. |
| 8 | GND1 | power_in | Ground reference for isolator side 1. |
| 9 | GND2 | power_in | Ground reference for isolator side 2. |
| 10 | VE2 | input | Active high output enable 2: VOA, VOB and VOC are enabled when high or disconnected and disabled when low; connecting it to an external logic high or low is recommended in noisy environments. |
| 11 | NC | unconnected | No connect. |
| 12 | VOC | output | Logic output C on isolator side 2. |
| 13 | VOB | output | Logic output B on isolator side 2. |
| 14 | VOA | output | Logic output A on isolator side 2. |
| 15 | GND2 | power_in | Ground reference for isolator side 2. |
| 16 | VDD2 | power_in | Supply voltage for isolator side 2, recommended 2.7 V to 5.5 V relative to GND2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOP-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Current per Channel, Quiescent | IDDI (Q) | 0.5 | 0.53 | mA | 5 | ||
| Output Supply Current per Channel, Quiescent | IDDO (Q) | 0.19 | 0.24 | mA | 5 | ||
| ADuM1300 VDD1 Supply Current, DC to 2 Mbps | IDD1 (Q) | 1.6 | 2.5 | mA | DC to 1 MHz logic signal freq. | 5 | |
| ADuM1300 VDD2 Supply Current, DC to 2 Mbps | IDD2 (Q) | 0.7 | 1 | mA | DC to 1 MHz logic signal freq. | 5 | |
| ADuM1300 VDD1 Supply Current, 10 Mbps | IDD1 (10) | 6.5 | 8.1 | mA | 5 MHz logic signal freq. | 5 | |
| ADuM1300 VDD2 Supply Current, 10 Mbps | IDD2 (10) | 1.9 | 2.5 | mA | 5 MHz logic signal freq. | 5 | |
| Input Currents | IIA, IIB, IIC, IE1, IE2 | -10 | 0.01 | 10 | µA | 0 V ≤ VIA, VIB, VIC ≤ VDD1 or VDD2, 0 V ≤ VE1, VE2 ≤ VDD1 or VDD2 | 5 |
| Logic High Input Threshold | VIH, VEH | 2 | V | 5 | |||
| Logic Low Input Threshold | VIL, VEL | 0.8 | V | 5 | |||
| Logic High Output Voltage (min = (VDD1 or VDD2) − 0.1 V) | VOAH, VOBH, VOCH | 5 | V | IOx = −20 µA, VIx = VIxH | 5 | ||
| Logic High Output Voltage (min = (VDD1 or VDD2) − 0.4 V) | VOAH, VOBH, VOCH | 4.8 | V | IOx = −3.2 mA, VIx = VIxH | 5 | ||
| Logic Low Output Voltage | VOAL, VOBL, VOCL | 0 | 0.1 | V | IOx = 20 µA, VIx = VIxL | 5 | |
| Logic Low Output Voltage | VOAL, VOBL, VOCL | 0.04 | 0.1 | V | IOx = 400 µA, VIx = VIxL | 5 | |
| Logic Low Output Voltage | VOAL, VOBL, VOCL | 0.2 | 0.4 | V | IOx = 3.2 mA, VIx = VIxL | 5 | |
| Minimum Pulse Width (5 V, BRW) | PW | 100 | ns | CL = 15 pF, CMOS signal levels | 6 | ||
| Maximum Data Rate (5 V, BRW) | 10 | Mbps | CL = 15 pF, CMOS signal levels | 6 | |||
| Propagation Delay (5 V, BRW) | tPHL, tPLH | 20 | 32 | 50 | ns | CL = 15 pF, CMOS signal levels | 6 |
| Pulse Width Distortion (5 V, BRW) | PWD | 3 | ns | CL = 15 pF, CMOS signal levels | 6 | ||
| Propagation Delay Skew (5 V, BRW) | tPSK | 15 | ns | CL = 15 pF, CMOS signal levels | 6 | ||
| Channel-to-Channel Matching, Codirectional Channels (5 V, BRW) | tPSKCD | 3 | ns | CL = 15 pF, CMOS signal levels | 6 | ||
| Channel-to-Channel Matching, Opposing-Directional Channels (5 V, BRW) | tPSKOD | 6 | ns | CL = 15 pF, CMOS signal levels | 6 | ||
| Output Disable Propagation Delay (High/Low to High Impedance) | tPHZ, tPLH | 6 | 8 | ns | CL = 15 pF, CMOS signal levels | 6 | |
| Output Enable Propagation Delay (High Impedance to High/Low) | tPZH, tPZL | 6 | 8 | ns | CL = 15 pF, CMOS signal levels | 6 | |
| Output Rise/Fall Time (10% to 90%) (5 V) | tR/tF | 2.5 | ns | CL = 15 pF, CMOS signal levels | 6 | ||
| Common-Mode Transient Immunity at Logic High Output | /CMH/ | 25 | 35 | kV/µs | VIx = VDD1 or VDD2, VCM = 1000 V, transient magnitude = 800 V | 6 | |
| Common-Mode Transient Immunity at Logic Low Output | /CML/ | 25 | 35 | kV/µs | VIx = 0 V, VCM = 1000 V, transient magnitude = 800 V | 6 | |
| Input Supply Current per Channel, Quiescent (3 V) | IDDI (Q) | 0.26 | 0.31 | mA | 7 | ||
| Output Supply Current per Channel, Quiescent (3 V) | IDDO (Q) | 0.11 | 0.15 | mA | 7 | ||
| ADuM1300 VDD1 Supply Current, DC to 2 Mbps (3 V) | IDD1 (Q) | 0.9 | 1.7 | mA | DC to 1 MHz logic signal freq. | 7 | |
| ADuM1300 VDD2 Supply Current, DC to 2 Mbps (3 V) | IDD2 (Q) | 0.4 | 0.7 | mA | DC to 1 MHz logic signal freq. | 7 | |
| ADuM1300 VDD1 Supply Current, 10 Mbps (3 V) | IDD1 (10) | 3.4 | 4.9 | mA | 5 MHz logic signal freq. | 7 | |
| ADuM1300 VDD2 Supply Current, 10 Mbps (3 V) | IDD2 (10) | 1.1 | 1.6 | mA | 5 MHz logic signal freq. | 7 | |
| Logic High Input Threshold (3 V) | VIH, VEH | 1.6 | V | 7 | |||
| Logic Low Input Threshold (3 V) | VIL, VEL | 0.4 | V | 7 | |||
| Logic High Output Voltage (min = (VDD1 or VDD2) − 0.1 V) (3 V) | VOAH, VOBH, VOCH | 3 | V | IOx = −20 µA, VIx = VIxH | 7 | ||
| Logic High Output Voltage (min = (VDD1 or VDD2) − 0.4 V) (3 V) | VOAH, VOBH, VOCH | 2.8 | V | IOx = −3.2 mA, VIx = VIxH | 7 | ||
| Logic Low Output Voltage (3 V) | VOAL, VOBL, VOCL | 0 | 0.1 | V | IOx = 20 µA, VIx = VIxL | 7 | |
| Logic Low Output Voltage (3 V) | VOAL, VOBL, VOCL | 0.04 | 0.1 | V | IOx = 400 µA, VIx = VIxL | 7 | |
| Logic Low Output Voltage (3 V) | VOAL, VOBL, VOCL | 0.2 | 0.4 | V | IOx = 3.2 mA, VIx = VIxL | 7 | |
| Minimum Pulse Width (3 V, BRW) | PW | 100 | ns | CL = 15 pF, CMOS signal levels | 8 | ||
| Maximum Data Rate (3 V, BRW) | 10 | Mbps | CL = 15 pF, CMOS signal levels | 8 | |||
| Propagation Delay (3 V, BRW) | tPHL, tPLH | 20 | 38 | 50 | ns | CL = 15 pF, CMOS signal levels | 8 |
| Pulse Width Distortion (3 V, BRW) | PWD | 3 | ns | CL = 15 pF, CMOS signal levels | 8 | ||
| Propagation Delay Skew (3 V, BRW) | tPSK | 26 | ns | CL = 15 pF, CMOS signal levels | 8 | ||
| Channel-to-Channel Matching, Codirectional Channels (3 V, BRW) | tPSKCD | 3 | ns | CL = 15 pF, CMOS signal levels | 8 | ||
| Channel-to-Channel Matching, Opposing-Directional Channels (3 V, BRW) | tPSKOD | 6 | ns | CL = 15 pF, CMOS signal levels | 8 | ||
| Output Rise/Fall Time (10% to 90%) (3 V) | tR/tF | 3 | ns | CL = 15 pF, CMOS signal levels | 8 | ||
| Operating Temperature (TA) | TA | -40 | 105 | °C | Operating temperature 1 (not ADuM1300W/ADuM1301W automotive grade) | 22 | |
| Supply Voltages (VDD1, VDD2) | VDD1, VDD2 | 2.7 | 5.5 | V | Not automotive W grade; all voltages relative to their respective ground | 22 | |
| Input Signal Rise and Fall Times | 1 | ms | 22 | ||||
| Storage Temperature | TST | -65 | 150 | °C | 23 | ||
| Ambient Operating Temperature | TA | -40 | 105 | °C | Not automotive W grade | 23 | |
| Supply Voltages | VDD1, VDD2 | -0.5 | 7 | V | All voltages relative to their respective ground | 23 | |
| Input Voltage | VIA, VIB, VIC, VE1, VE2 | -0.5 | V | max = VDDI + 0.5 V | 23 | ||
| Output Voltage | VOA, VOB, VOC | -0.5 | V | max = VDDO + 0.5 V | 23 | ||
| Average Output Current per Pin, Side 1 | IO1 | -23 | 23 | mA | Side 1; see Figure 3 for derating | 23 | |
| Average Output Current per Pin, Side 2 | IO2 | -30 | 30 | mA | Side 2; see Figure 3 for derating | 23 | |
| Common-Mode Transients | -100 | 100 | kV/µs | 23 | |||
| IC Junction-to-Case Thermal Resistance, Side 1 | θJCI | 33 | °C/W | Thermocouple located at center of package underside | 20 | ||
| IC Junction-to-Case Thermal Resistance, Side 2 | θJCO | 28 | °C/W | Thermocouple located at center of package underside | 20 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | pC | In accordance with DIN EN IEC 60747-17 (VDE 0884-17), each ADuM1300/ADuM1301 is proof tested by applying an insulation test voltage ≥1050 Vpeak for 1 sec (partial discharge detection limit = 5 pC). Th | 20 |
CAD (KiCad official)
- Symbol:
ADUM1300BRWZ-RL - Footprint:
Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm - 3D model: SOP-16-300mil (KiCad packages3D, STEP)
- 3D model files:
adum1300brwz-etched.step/adum1300brwz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adum1300brwz.step/adum1300brwz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (33 pp, sha256
77bbe7a76fc7b1fe, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).