component
ADTL084ARUZ-REEL
Public Made by Adomby adom
Analog Devices FET Input Amplifiers, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADTL084ARUZ-REEL
Analog Devices · FET Input Amplifiers · TSSOP-14
ADTL084ARUZ-REEL from Analog Devices, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A; the datasheet gives no separate limit for this pin beyond the absolute maximum ratings (supply ±18 V or +36 V). |
| 2 | -IN A | input | Inverting input of amplifier A; input voltage must not exceed ±V supply per the absolute maximum ratings. |
| 3 | +IN A | input | Non-inverting input of amplifier A; input voltage range is −11 V to +15 V with ±15 V supplies. |
| 4 | +V | power_in | Positive supply; operating supply is ±15 V and the absolute maximum is ±18 V or +36 V. |
| 5 | +IN B | input | Non-inverting input of amplifier B; input voltage must not exceed ±V supply per the absolute maximum ratings. |
| 6 | -IN B | input | Inverting input of amplifier B; input voltage must not exceed ±V supply per the absolute maximum ratings. |
| 7 | OUT B | output | Output of amplifier B; the datasheet gives no separate limit for this pin beyond the absolute maximum ratings. |
| 8 | OUT C | output | Output of amplifier C; the datasheet gives no separate limit for this pin beyond the absolute maximum ratings. |
| 9 | -IN C | input | Inverting input of amplifier C; input voltage must not exceed ±V supply per the absolute maximum ratings. |
| 10 | +IN C | input | Non-inverting input of amplifier C; input voltage must not exceed ±V supply per the absolute maximum ratings. |
| 11 | -V | power_in | Negative supply; operating supply is ±15 V and the absolute maximum is ±18 V or +36 V. |
| 12 | +IN D | input | Non-inverting input of amplifier D; input voltage must not exceed ±V supply per the absolute maximum ratings. |
| 13 | -IN D | input | Inverting input of amplifier D; input voltage must not exceed ±V supply per the absolute maximum ratings. |
| 14 | OUT D | output | Output of amplifier D; the datasheet gives no separate limit for this pin beyond the absolute maximum ratings. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (25°C) | VOS | 1.5 | 5.5 | mV | 3 | ||
| Input offset voltage (0 to +70°C) | VOS | 8 | mV | 0°C ≤ TA ≤ +70°C | 3 | ||
| Input offset voltage (−40 to +125°C) | VOS | 9 | mV | −40°C ≤ TA ≤ +125°C | 3 | ||
| Input offset voltage drift | ∆VOS/∆T | 10 | μV/°C | −40°C ≤ TA ≤ +125°C | 3 | ||
| Input bias current (25°C) | IB | 2 | 100 | pA | 3 | ||
| Input bias current (0 to 70°C) | IB | 3 | nA | 0°C ≤ TA ≤ 70°C | 3 | ||
| Input bias current (−40 to +125°C) | IB | 5 | nA | −40°C ≤ TA ≤ +125°C | 3 | ||
| Input offset current (25°C) | IOS | 2 | 100 | pA | 3 | ||
| Input offset current (0 to 70°C) | IOS | 3 | nA | 0°C ≤ TA ≤ 70°C | 3 | ||
| Input offset current (−40 to +125°C) | IOS | 5 | nA | −40°C ≤ TA ≤ +125°C | 3 | ||
| Input voltage range | VCM | -11 | 15 | V | 3 | ||
| Common-mode rejection ratio | CMRR | 80 | 86 | dB | VCM = −11 V to +15 V | 3 | |
| Large-signal voltage gain (25°C) | AVO | 100 | 200 | V/mV | RL = 2 kΩ, VO = −10 V to +10 V | 3 | |
| Large-signal voltage gain (0 to 70°C) | AVO | 90 | 200 | V/mV | 0°C ≤ TA ≤ 70°C | 3 | |
| Large-signal voltage gain (−40 to +125°C) | AVO | 50 | 200 | V/mV | −40°C ≤ TA ≤ +125°C | 3 | |
| Maximum output voltage swing, RL = 10 kΩ (25°C), magnitude | VO | 13 | 13.5 | V | RL = 10 kΩ | 3 | |
| Maximum output voltage swing, RL = 10 kΩ (0 to 70°C), magnitude | VO | 13 | V | 0°C ≤ TA ≤ +70°C | 3 | ||
| Maximum output voltage swing, RL = 10 kΩ (−40 to +125°C), magnitude | VO | 13 | V | −40°C ≤ TA ≤ +125°C | 3 | ||
| Maximum output voltage swing, RL = 2 kΩ (0 to 70°C), magnitude | VO | 12 | V | 0°C ≤ TA ≤ +70°C | 3 | ||
| Maximum output voltage swing, RL = 2 kΩ (−40 to +125°C), magnitude | VO | 12 | V | −40°C ≤ TA ≤ +125°C | 3 | ||
| Supply current per amplifier (25°C) | ISY | 1.2 | 1.8 | mA | 3 | ||
| Supply current per amplifier (0 to 70°C) | ISY | 1.9 | mA | 0°C ≤ TA ≤ +70°C | 3 | ||
| Supply current per amplifier (−40 to +125°C) | ISY | 2 | mA | −40°C ≤ TA ≤ +125°C | 3 | ||
| Power supply rejection ratio | PSRR | 80 | 86 | dB | VDD = 8 V to 36 V | 3 | |
| Supply voltage, dual supply | -18 | 18 | V | Dual supply, ±18 V | 4 | ||
| Supply voltage, single supply | 36 | V | Single supply, +36 V | 4 | |||
| Input current during power sequencing | 10 | mA | Applied when supplies are not established before or with the input signal | 4 | |||
| Storage temperature range | -65 | 150 | °C | 4 | |||
| Operating temperature range | -40 | 125 | °C | 4 | |||
| Junction temperature | 150 | °C | 4 | ||||
| Lead temperature, soldering | 300 | °C | Soldering, 60 s | 4 | |||
| Thermal resistance, junction-to-ambient | θJA | 180 | °C/W | 14-lead TSSOP (RU-14) | 4 | ||
| Thermal resistance, junction-to-case | θJC | 35 | °C/W | 14-lead TSSOP (RU-14) | 4 |
CAD (KiCad official)
- Symbol:
ADTL084ARUZ-REEL - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
adtl084aruz-reel-etched.step/adtl084aruz-reel-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adtl084aruz-reel.step/adtl084aruz-reel.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
f850a11a83198dab, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).